The event WMI_ROAM_STATS_EVENTID is received after
every roam, once the roam synch complete is sent by the host.
This event contains details regarding the roam trigger reason,
values associated with the trigger, roam scan candidate info,
roam status, roam failure reason.
This helps in debugging/understanding the scenario when roam
failure happens.
WMI_ROAM_STATS_EVENTID Format:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
roam_stats_event_fixed_param |-> Contains vdev id and number of
| roams detail.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
roam_trigger data TLV |-> Has details on the roam trigger
| reason. Number of roam triggers
| TLV detail is present in the
| fixed param. Maximum 5 roam
| per event is supported
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
wmi_roam_scan_info TLV |-> Has details on the roam scan -
| scan type, rssi threshold,
| reason.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
wmi_roam_scan_channel_info |-> Has details on the roam scan
TLV | channels. Number of channels
| per trigger is found on the
| wmi_roam_scan_info TLV.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
wmi_roam_ap_info TLV |-> Has details on Roam candidate
| APs found during scan. Number
| of roam candidate APs per
| trigger is found on the
| on the wmi_roam_scan_info tlv.
| Max 8 candidates are allowed
| per roam scan.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
wmi_roam_result TLV |-> Info on roam success or failure.
| Fail reason, if roaming failed.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
wmi_roam_neighbor_report_info|->After roaming, firmware sends
TLV | neighbor/btm report to roamed AP
| to get list of roam candidates.
| This tlv provides info on this.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
wmi_roam_neighbor_channel_info|-> This has the info on the
| channel list received as part
| of BTM/Neighbor report.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Print the info received as part of this event into kmsg.
Featurize all the function defines for this roam logging under
WLAN_FEATURE_ROAM_OFFLOAD flag.
Change-Id: Iddc70b572f2e3dc47f08fd1c3c3597cb44981a17
CRs-Fixed: 2576222
Cleanup peer id from the callers of cdp APIs from
where the peer ID was passed, and use mac address
instead to identify the STA.
Change-Id: Ie6dcae77e959439a71c11b1a2fa0daddcaa6e719
CRs-Fixed: 2529822
As part of the new changes, vdev mlme object will be freed before
the vdev delete response is received from the firmware. Hence do
not use the vdev_mlme object in the vdev delete response handler.
Change-Id: Idec5775f6c7ac767baedd173a7bde0d3a358d0fe
CRs-Fixed: 2563381
The ANI level determines how well the device is coping with interference
in the wireless environment. Add support in the driver to query the ANI
level from the firmware and populate it for userspace entities to use.
Change-Id: I54934f670aa11737e11eca4d64e12f9dffb4f430
CRs-Fixed: 2554674
Send vdev create to firmware when the mlme vdev create handler
is invoked as part of the vdev object create.
Change-Id: Ibba02f6b5885d7b3a62529ef51768f520395513e
CRs-Fixed: 2555943
Currently the cdp apis are given pdev/vdev/peer
handle as its arguments, which is directly
accessed in those APIs. This can cause a
race-condition in access of the respective
handles if it has been deleted in parallel.
Hence as a part of cdp convergence, pass only
the pdev/vdev id or peer mac address, which will be
used to get the respective handles, and hence
avoiding the unwanted access of the handles if
it has been deleted.
Converged misc_ops
- tx_non_std
- get_opmode
- get_tx_ack_stats
- set_ibss_vdev_heart_beat_timer
- hl_tdls_flag_reset
- set_wisa_mode
- txrx_post_data_stall_event
- update_mac_id
- pkt_log_init
- pkt_log_con_service
- get_num_rx_contexts
- set_wmm_param
- flush_rx_frames
- bad_peer_txctl_set_setting
- bad_peer_txctl_update_threshold
- txrx_data_stall_cb_register
- txrx_data_stall_cb_deregister
- vdev_set_driver_del_ack_enable
- get_intra_bss_fwd_pkts_count
- mark_first_wakeup_packet
- register_pktdump_cb
- unregister_pktdump_cb
- pdev_reset_driver_del_ack
- runtime_suspend
- runtime_resume
CRs-Fixed: 2539735
Change-Id: I2baad09fde29d439ae2099e01e4e68ed6b94196d
Presently as part of the vdev creation the self peer for the vdev
is created in the object manager and in the firmware. The self
peer creation in the object manager needs the vdev to be in the
created state. As part of new changes to send the vdev create to
firmware as part of the vdev creation notification there will be
failure in creating in the self peer.
Hence, drive the self peer creation from the SME layer which will
create the vdev.
Change-Id: I0875f4ec5bd96438c0f21056e1d6920d3be2a177
CRs-Fixed: 2555868
target_if F/W event handler is moved from wma to cmn part per
MCL/WIN converge requirement.
Change-Id: I583059190827c9aed8d8089412a4cfac92ddf4c9
CRs-Fixed: 2554859
Vdev start/stop/delete events have been registered in
target_if_vdev_mgr_wmi_event_register in MCL/WIN common code.
Change MACRO name SERIALIZE_VDEV_RESP_TIMER to
SERIALIZE_VDEV_RESP.
Change-Id: I4d54a4755d7311b488f12f46a73db7e4645a4e0b
CRs-Fixed: 2554732
This change is to support 11ax linkspeed rate
on UI.
It supports different config for gReportMaxLinkSpeed.
Current 11ax rate support to max 80 nss2 mcs11.
Change-Id: Iff8cbafe1354ab50c4b3a90ef8ab698a3350a21d
CRs-Fixed: 2529291
Update SME/CSR for using channel frequency in STA connection
params and handle 6G AP IEs for association.
Change-Id: I1725223b6763a729762b604c850c9b493f739ae6
CRs-fixed: 2552009
With des_chan->ch_phymode already having the chanmode value,
remove chanmode from from struct wma_txrx_node to use common
des_chan->ch_phymode
Change-Id: Ib34a032b541367305a9fdba998ed6a00073ac9aa
CRs-Fixed: 2550440
Remove sta index references in lim since mac address
would be used instead of this index as part of the
sta index cleanup.
Change-Id: Ia7cbb94cf988a04506440ddaca6b1c302e13e852
CRs-Fixed: 2524509
Remove usage of cdp APIs to fetch local id and cleanup
few sta index references in wma and lim.
Change-Id: I32633ef7491b3b91ee55dd813a009c4d8010a3f5
CRs-Fixed: 2524506
As a part of 802.11ax amendment, 6GHz band operation is added.
Since the 6 GHz channel numbers are overlapping with existing 2.4GHz
and 5GHz channel numbers, use frequency to identify unique channel
operation instead of channel number. Channel frequency is unique across
bands.
As part of above requirement add logic to process rx mgmt
packets based on the frequencies instead of channel numbers.
Change-Id: Ib063070738ecdb4f83379eafe50629778a490aae
CRs-fixed: 2522693
In WPA3 roam hybrid model, the SAE exchange/4-way handshake is
offloaded to the wpa_supplicant. After roam candidate selection,
firmware will send WMI_ROAM_PREAUTH_START_EVENTID to send SAE
authentication frame with the selected candidate. If the host
is in suspended state, then SAE preauthentication could fail.
So wakeup the host when WMI_ROAM_PREAUTH_START_EVENTID event is
received to carry out the SAE authentication with the provided
candidate
Change-Id: I7a89234e90e7fccef58ec3822dc0cda3740bad20
CRs-Fixed: 2512871
Invalid peer keeps sending rx ind which triggers sending of
deauth mgmt frame continiously.
Fix is to add flow control in wma_rx_invalid_peer_ind()
to limit per peer deauth mgmt frame to one.
Change-Id: Icfbcb9452ee9890a26945b3cdd0c0ab07649367a
CRs-Fixed: 2538222
enum wlan_phymode is the enum to store the phymode in host
and thus replace WLAN_PHY_MODE with enum wlan_phymode
and add the corresponding change in the code to use
enum wlan_phymode.
Change-Id: I6c7990255f193eb3afdeeb278d3cc159ef8503b1
CRs-Fixed: 2544822
Few phymode are missing from enum wlan_phymode and many are not
valid phymode, e.g for 5ghz 40minus and 40plus are not valid.
So add the missing enums and remove invalid enums from enum
wlan_phymode.
Change-Id: I56710c6a04ac365a54e2c4ba138e0e887fbdd960
CRs-Fixed: 2531859
Disable the current TWT session and re-enable the TWT if the
current session in FW trigger mode before changing the TWT mode
to host trigger mode.
Change-Id: I7de2126605685c85a240d38356d439cb4be8cce1
CRs-Fixed: 2539353
In SSR case the mlme_vdev_obj_destroy_handler for the vdev may
get called after the dp soc is uninitialized and thus the
cdp_vdev_detach will not get called to free dp vdev.
Thus free dp vdev before sending the vdev delete and
for force cleanup due to ssr try to free it before detaching
dp soc.
Change-Id: I6f1f95a4f8bbc4cb316e8fd59f6411a6c0c2c099
CRs-Fixed: 2538481
On passing vdev as argument to "wlan_vdev_get_dp_handle", it returns
"dp_handle". "wlan_vdev_get_dp_handle" has BUG_ON check for NULL vdev,
so VDEV NULL check is added before calling "wlan_vdev_get_dp_handle".
Change-Id: I68ffab078fb35d47e1e771215de610290455b7d7
CRs-Fixed: 2538435
As a part of vdev convergence, struct wma_tx_rx_node's handle &
rate_flags members are no more unused. These values are derived
from mlme_obj.
So no more used members of struct wma_txrx_node are cleaned.
Change-Id: I0b536c50717edc293ab27e5d520eb490266ba2ce
CRs-Fixed: 2534222
Cleanup unused params from struct bss_params after moving to
vdev target if for add bss request.
Change-Id: Ib3cf3726b4b4c692a0323669770632f2031d4e9a
CRs-Fixed: 2535156
Refactor LFR2 and OCB vdev start, fill vdev mlme directly,
don't use wma_vdev_start_req.
Clean up wma_vdev_start_req
Clean up wma_vdev_start
Change-Id: Ic647271dee8c69f8cb9500fa3b5388ce7ef39ace
CRs-Fixed: 2534828
In the legacy code, "wma_set_ibss_pwrsave_params" was called from
code protected under "QCA_IBSS_SUPPORT". Refactor ap vdev start
change call this function, hence dummy definition for
"wma_set_ibss_pwrsave_params" is added.
Inline dummy function "wma_set_ibss_pwrsave_params" is added to
overcome compilation errors if QCA_IBSS_SUPPORT is disabled.
Change-Id: Idff86469480d607c9ce1cc4f65fcd65b01a83308
CRs-Fixed: 2535135
1. When AP/IBSS/NAN vdev start, fill parameters into
vdev mlme directly.
2. LIM call wma API directly instead of post msg.
3. Add pre/post vdev start handlers
4. Remove following functions:
wma_add_bss
wma_add_bss_ap_mode
wma_add_bss_ibss_mode
wma_add_bss_ndi_mode
mlm_add_sta
5. Add lim_set_ch_phy_mode to set phy mode for all vdev start
cases.
Change-Id: I0dc32e399dc9b49c9bbca16fbc4bd0f44eab284d
CRs-Fixed: 2533714
As a part of vdev convergence, struct wma_tx_rx_node's bssid & addr
members are no more unused. These values are derived from mlme_obj.
So no more used members of struct wma_txrx_node are cleaned.
Change-Id: I2462a25f91b66b9efac42935a599f1362cb268f1
CRs-Fixed: 2532061
Replace pe_find_session_by_sme_session_id with
pe_find_session_by_vdev_id as sme_session_id is vdev id.
Change-Id: I5fa537ff8e391fc18e568fd6f750334268faafa9
CRs-Fixed: 2531681
The bssId in struct sDphHashNode represent vdev_id and same can
be used from pe session which already has this info so remove
bssId param.
Change-Id: I47a7f27e95bfaa9ecd617cb531895601a27dfbf5
CRs-Fixed: 2530965
Many legacy params of tpAddStaParams are unused, thus
cleanup the unused params from tpAddStaParams.
Change-Id: I1be957d2f34d2202bcc1d44e69ad5cba0812c60b
CRs-Fixed: 2530961
struct bss_params has many legacy params which are not used. So
remove the unused params from struct bss_params.
Change-Id: I7d930e83ff0ce56bf8fb07789f9fca9f94fb6f74
CRs-Fixed: 2530215
The add_bss_req struct is used while handling add bss resp,
and is stored in vdev priv mlme.
The resp path require the info which can be filled from vdev resp
and thus no need to store the add_bss_req. From response fill and
use the add_bss_resp in add bss response handling path
Change-Id: I7ec1189c7d399e181f451a442a2578964eb4e47d
CRs-Fixed: 2529289
When channel switch, don't use tpSwitchChannelParams, fill
wma_vdev_start_req directly in LIM lim_send_switch_chnl_params.
Update wma_set_channel(struct wma_vdev_start_req *req)
PE/LIM call wma API directly for channel switch, don't post msg.
Clean up useless tpSwitchChannelParams.
Change-Id: I876207909ff0bc50f9ec1fbff639c0e9b7d03907
CRs-Fixed: 2529018
It need rx chainmask to select noise floor when start spectral gen3
scan and rx data by DMA. So set rx chainmask before start spectral
scan.
Change-Id: I63efd8f5384537b5697ba809bb05fdd17e243210
CRs-Fixed: 2519366
Populate vdev mlme obj and dest chain with vdev start req for
vdev_mgr_start_send.
Remove vdev_start_params from wma_vdev_start.
Remove vdev_mgr_start_param_populate.
Change-Id: I8606441341344fbcd181facf4000942ff94ac00d
CRs-Fixed: 2516590
Vdev start failure handling in SAP and STA and not handled
properly and thus VDEV SM doesn't move to INIT state and
lead to asserts.
Change-Id: I5ea09f9c6e84a2e1c7f9254319aaa1a11e2f97e8
CRs-Fixed: 2526179
Devide wma_add_bss_sta_mode into 4 functions for 4 cases:
1. wma_pre_assoc_req, called before sta assoc, config vdev
params.
2. wma_send_peer_assoc_req, called after sta associated, send
peer assoc cmd to F/W.
3. LFR3 add bss
4. LFR2 add bss and vdev start
Lim will call these functions directly instead of post msg to
wma.
Replace lim_set_link_state with wma_add_bss_peer_sta to create
peer for LFR2 roaming.
Clean up all link state usless code now.
Change-Id: I6ad19bb92e7b0334704ac9c930277e9c35abbee2
CRs-Fixed: 2510119
Switch legacy vdev up to vdev mgr/target if vdev up
Remove wakelock since it is handled in target if.
Clean up legacy vdev up API.
Change-Id: I125b202e9a18ee3bf279fe4df7bc17b9ec7bf999
CRs-Fixed: 2516586
With vdev operations moved to target if from the wma, the vdev
request hold framework is not used.
Thus remove the unused functions and structures
Change-Id: I6e609735ad0bdc8b929cfffa6f13915f0ad6823d
CRs-Fixed: 2523104
