In wlan_crypto_save_key store igtk def index, bigtk def index and
igtk key type in crypto priv.
Change-Id: I96161a6dd376e7e80f88da00c891d15a5645cfa7
CRs-Fixed: 2661197
Populate number of Spectral detectors per BW in the
Spectral capability vendor command response.
CRs-Fixed: 2659587
Change-Id: I2eba5df02a5f70556d65e689aece1f0fbd8bba93
Add an attribute QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_FREQUENCY_2
for describing the secondary 80 MHz span of agile spectral scan.
CRs-Fixed: 2659496
Change-Id: I751513cb248c42dd7c59d7d979fc571459e48ad1
Since netdevice name retrieval is tied to OS,
move it to qdf OS layer instead of doing it
inside CFR ucfg layer.
Change-Id: Ia9dcbdf56bcb36a1f0788be9964ea87fdf5beb3f
CRs-Fixed: 2643682
In osif_akm_type_crypto_mapping DPP, CCKM, OSEN and OWE AKMs are not
added. So AKM are not added in crypto module.
So add DPP, CCKM, OSEN and OWE enums in osif_akm_type_crypto_mapping.
Change-Id: Ie9e092f591ea03026cbf360abe40c663bdd078fd
CRs-Fixed: 2650380
Add QCA_WLAN_VENDOR_CFR_NDPA_NDP_ALL in enum
qca_wlan_vendor_cfr_capture_type. This capture type requests all NDPA
NDP frames to be filtered.
Change-Id: I2003975012ad1c486b18a460c8ef2e691379d3d9
CRs-Fixed: 2649260
Some CFR attributes are used frequently with conditions, so change them
from required to optional.
Change-Id: I835906d314bfb4d94100ba7794603de1c2dbcc8d
CRs-Fixed: 2649263
Enhanced channel frequency response supports to capture channel status
information based on RX. Define previous CFR as version 1 and enhanced
CFR as version 2. If target supports both versions, two versions can't
be enabled at same time. Extend attributes for enhanced CFR capture in
enum qca_wlan_vendor_peer_cfr_capture_attr.
Change-Id: If9a5e387f03981eb75f98138fe555f4489ccb377
CRs-Fixed: 2641774
Add a subcommand for Channel Frequency Response (CFG) Capture
Configuration and define attributes for configuring CFR capture
parameters per peer and enabling/disabling CFR capture.
Change-Id: I94869b06f8e7eb499ebed8d49e99b342907a9aa1
CRs-Fixed: 2647239
Add more hang reason codes for the hang reason in the
QCA_NL80211_VENDOR_SUBCMD_HANG events. This also introduces the
attribute QCA_WLAN_VENDOR_ATTR_HANG_REASON_DATA to carry the required
data for the respective hang reason. This data is expected to contain
the required dump to analyze the reason for the hang
Change-Id: I4912f896d394667055937faf68c9ceb32a469978
CRs-Fixed: 2650292
Host driver processes cld80211 vendor subcmd
CLD80211_VENDOR_SUB_CMD_OEM_DATA and send
response in NLA format. Peer status indication
is also sent in nla format
CRs-Fixed: 2597282
Change-Id: I94f1fb7939141952ef92dbb7d3a130ba20d31608
Host driver processes cld80211 vendor sub command
CLD80211_VENDOR_SUB_CMD_GET_CH_INFO and respond with
NLA type CH_INFO response
CRs-Fixed: 2595374
Change-Id: Ibe6f2431ac1cae6e4560ec11424434b4f1cf8b76
Host driver processes cld80211 vendor sub command
CLD80211_VENDOR_SUB_CMD_GET_CAPS and respond with
NLA type CAP response
CRs-Fixed: 2595140
Change-Id: I5a6aa1fac537ca618404520b81c541a20dafd6fb
Enhance logs for PNO scan to remove duplicate
or unwanted prints and keep only useful logs to debug.
Change-Id: Ibe24714e925a00933911c801685528849e160480
CRs-Fixed: 2636641
Remove static from nla_policy btc_chain_mode_policy in correspondence to
the change to add policy attribute to BTC_CHAIN_MODE vendor subcommand.
Change-Id: Ie33542199d27f6b9d8ea5e0a1a063b71ecb7fd94
CRs-Fixed: 2635059
Remove static from nla_policy spectral_scan_policy in correspondence to
the change to add policy attribute to SPECTRAL_SCAN vendor subcommand.
Change-Id: I764a51f5c1355cb0c3dd2096e6dc7ee332b2f3d6
CRs-Fixed: 2634075
According to new changes in kernel 5.2 version onwards, driver has to
provide the policy for a NL command to be verified against while
registering wiphy to the kernel.
To accommodate these changes, add policy to the following vendor
command that is being registered in the driver.
QCA_NL80211_VENDOR_SUBCMD_ABORT_SCAN
Change-Id: I7cd4e6c50a48580a124e36c32b9cbebe557c04bf
CRs-Fixed: 2621311
Add an attribute QCA_WLAN_VENDOR_ATTR_SCAN_DWELL_TIME for specifying
dwell time in the QCA vendor scan command. This is a common value
which applies across all frequencies requested in the scan.
Additionally, update the existing definitions in enum
qca_wlan_vendor_attr_scan to the exact code upstreamed.
CRs-Fixed: 2633010
Change-Id: I09feccc99fb8e53538d495345eda9744e36fc5b4
According to new changes in kernel 5.2 version onwards, kernel takes
care of validating the NLA policies as provided by the driver. In this
case there is no need to re-validate the same in the driver.
Add a stub to return true for NLA parse in case the kernel version is
greater than equal to 5.2
Change-Id: Iea1fdcac3000ede2f8b9398cb85443e545cdd3f0
CRs-Fixed: 2632534
According to new changes in kernel 5.2 version onwards, driver has to
provide the policy for each NL command to be verified against while
registering wiphy to the kernel.
To enable support for this, define a new macro VENDOR_NLA_POLICY_NESTED
taking care of the version compatibility.
Change-Id: I6aec53e94c57434f8e68b936ad5422248c3fa167
CRs-Fixed: 2632081
According to new changes in kernel 5.2 version onwards, driver has to
provide the policy for each NL command to be verified against while
registering wiphy to the kernel.
To enable support for this, define a new macro taking care of the version
compatibility.
Change-Id: I0bf7153d1889e5b31c07d6bf4c7a95f5e72dd93c
CRs-Fixed: 2632019
There is memory leak in get_station_stats_cb:
priv->vdev_summary_stats, priv->vdev_chain_rssi,
priv->peer_adv_stats. But the “request” is not leaked,
that means the “.dealloc” should be called.
The suspect is the get_station_stats_cb was called two
times with same cookie (request) before the "request"
was freed, that caused the priv->vdev_summary_stats
and the others two member of "priv" were overwritten,
and then memory leaks.
From the cp stats components there are multiple places
to call ucfg_mc_cp_stats_reset_pending_req to reset the
unused pending.req(has a cookie) to zero. The zero
cookie may be used in again.
Change the ucfg_mc_cp_stats_reset_pending_req API to do
atomic operation of "reset" and "get" last pending
request.
Change-Id: I5efb7efec4da1edc0aab33b940dc126012a3f12e
CRs-Fixed: 2622444
This attribute enables/disables the host driver to send roam reason
information in the reassoc request to the AP in the same ESS.
Change-Id: Ie2606012c0487936dd0b436f0d6a75d2e115f4b4
CRs-Fixed: 2627261
Add new attributes for getting the Beacon frame IEs and the
disconnection reason codes through get_sta_info vendor command.
Host driver provides this information in STA mode.
Add new attribute to get assoc request IEs of the disconnected
peer. Host driver provides this information in SAP mode.
The host driver shall give these attributes as a response to the
vendor command QCA_NL80211_VENDOR_SUBCMD_GET_STATION.
Add the below attributes in to be in sync with userspace,
QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_TX_FAILURE
QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_AVG_RSSI_PER_CHAIN
QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_TX_RETRY_SUCCEED
QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_RX_LAST_PKT_RSSI
QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_TX_RETRY
QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_TX_RETRY_EXHAUST
QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_TX_TOTAL_FW
QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_TX_RETRY_FW
QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_TX_RETRY_EXHAUST_FW
Change-Id: If2727ea4ecbb157035c0f4a989a1a936a5bca64c
CRs-Fixed: 2624843
This acts as an event from the host driver to the user space to notify
the driver specific reason for a disconnection. The host driver
initiates the disconnection for various scenarios (beacon miss, Tx
Failures, gateway unreachability, etc.) and the reason codes from
cfg80211_disconnected() do not carry these driver specific reason codes.
Host drivers should trigger this event immediately prior to triggering
cfg80211_disconnected() to allow the user space to correlate the driver
specific reason code with the disconnect indication.
Change-Id: I6337c02a3508c7ce282f0e3e947d7592e8550308
CRs-Fixed: 2624841
This attribute aims the STA to send the Beacon Report response
with failure reason for the scenarios where the Beacon Report
Request cannot be handled.
Change-Id: I1b57d1c810deee4545c9a3b84b45ab5bd539d9bb
Crs-Fixed: 2622023
This acts as a vendor event and is used to update the information
of a station from the driver to userspace.
Add an attribute for the driver to update the channels scanned in
the last connect/roam attempt.
Change-Id: I3e87292d6ef00c0242cb583183de2b441352c8a5
CRs-Fixed: 2622092
Add an attribute QCA_WLAN_VENDOR_ATTR_RTPLINST_PRIMARY_FREQUENCY for
primary channel center frequency in the definition for Representative
Tx Power List (RTPL) list entry instance. This is required for 6 GHz
support, since the 6 GHz channel numbers overlap with existing 2.4 GHz
and 5 GHz channel numbers thus requiring frequency values to uniquely
identify channels.
Mark QCA_WLAN_VENDOR_ATTR_RTPLINST_PRIMARY as deprecated if both the
driver and user space application support 6 GHz. For backward
compatibility, QCA_WLAN_VENDOR_ATTR_RTPLINST_PRIMARY is still used if
either the driver or user space application or both do not support the
6 GHz band.
Change-Id: I71c60aa9512bd183eaf73e1bffa57cab0d5b40c5
CRs-Fixed: 2612147
This change introduces the vendor event
QCA_NL80211_VENDOR_SUBCMD_REQUEST_SAR_LIMITS_EVENT.
Host drivers can request user space application to set SAR
power limits with this interface.
Change-ID: I15cf651c722bf828ba9012d81d99922c39a9e1fc
CRs-Fixed: 2615364
1) Enable DDMA support, FFT bin length adjustment SWARs
2) Skip 16 bytes of padding added after Spectral summary report.
3) FFT report header length is 24 instead of 16 in Pine.
4) Max FFT size is changed to 10.
CRs-Fixed: 2608215
Change-Id: If32a8995f814140f5b61041031fb842d01d24c94
Add a QCA vendor sub command QCA_NL80211_VENDOR_SUBCMD_THERMAL_CMD
to implement thermal mitigation. Different operations required to
implement this feature can be specified in
QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_VALUE,
QCA_WLAN_VENDOR_ATTR_THERMAL_LEVEL.
Userspace requests the driver to enable/disable thermal mitigation
based on the thermal state of the device and wlan host performs the
required appropriate action. wlan host driver maps the thermal level
provided from userspace via vendor command to corresponding duty
cycle off percent value and duty cycle value,send
WMI_THERM_THROT_SET_CONF_CMDID cmd to FW.
Make changes to perform vendor command handling, mapping thermal level
to duty cycle value and communicating the thermal information to FW.
Change-Id: Idc9c87dcb4275122980713471544baa23e705a53
CRs-Fixed: 2610403
During scan request from framework wlan_cfg80211_scan gets
invoked. If the cfg80211_scan_request parameter has number
of ssids set to zero then driver will set the scan mode to
passive mode. This will result in fw doing passive scan
instead of active scan. Probe request will not be sent to
discover the peer. This will sometimes result in failure
to discover P2P GO peer.
Set the scan mode to active mode in scan request message to FW.
Change-Id: Ic28757cb69ec62e554ac8baccce17cac504a0bef
CRs-Fixed: 2606614
Add active and passive scan dwell time parameters to cfg80211 scan
request API.
Change-Id: I39f479d7b941e4671f1ad4495ab48031153dd5e7
CRs-Fixed: 2598504
Fix compile issues when some features are disabled, the features are:
BUILD_DEBUG_VERSION
CONFIG_CP_STATS
CONFIG_HOST_OPCLASS
CONFIG_FEATURE_ROAM_DEBUG
There are some other features depends on each other, so enabled features to
qcs40x.snoc.perf_defconfig, the features are:
CONFIG_WLAN_FEATURE_FILS
CONFIG_WMI_ROAM_SUPPORT
CONFIG_WMI_STA_SUPPORT
CONFIG_REG_CLIENT
CONFIG_WLAN_FEATURE_DP_BUS_BANDWIDTH
CONFIG_WMI_CONCURRENCY_SUPPORT
CONFIG_LL_DP_SUPPORT
Change-Id: I6fa1eacb79576a955e593dbb9ac52083742275e3
CRs-Fixed: 2584839
Currently use of comamnd QCA_NL80211_VENDOR_SUBCMD_OEM_DATA
is to pass data blobs from Application to FW but there is
no mechanism to send the data blobs from FW to Application.
To meet the above requirement update the usage of existing
OEM DATA command to use it as a vendor event as well to
send data blob from host to Application.
Change-Id: I8df98f850f4dd56f55dba43c5364a52c425ba9ed
CRs-Fixed: 2573468
All gen III chipsets use Direct-DMA mechanism to copy Spectral reports to
the Host for further processing. This mechanism involves ring and buffer
management in the Host, FW, and uCode, where improper/incomplete DMA and
improper tail update issues are seen. DBR framework provides support to
debug such issues. Add Spectral control path support to facilitate the
configuration of these debug options.
CRs-Fixed: 2478596 2478595
Change-Id: I094616c4137145389b6984ccab933e5ebd0aa1ab
Add new stats_id WMI_REQUEST_MIB_STATS &
WMI_REQUEST_MIB_EXTD_STATS in WMI_REQUEST_STATS_CMDID
to retrieve MIB statistics from fw.
Change-Id: I17bccc2673d1a2ce035db04d8426bab49db80790
CRs-Fixed: 2548165
Replace channel ID with channel frequency in
wlan_cfg80211_is_chan_ok_for_dnbs.
Change-Id: I0e275da65258f87abfc36d6c9148f9f4437a4389
CRs-Fixed: 2552022
To config BT coex chain mode, add a new QCA sub command
QCA_NL80211_VENDOR_SUBCMD_BTC_CHAIN_MODE.
This new command has two attributes:
1. QCA_VENDOR_ATTR_COEX_BTC_CHAIN_MODE: u32 attribute. Indicates the
BT coex chain mode, are 32-bit values from enum qca_btc_chain_mode.
2. QCA_VENDOR_ATTR_COEX_BTC_CHAIN_MODE_RESTART: flag attribute.
If set, vdev should be restarted once BT coex chain mode is updated.
Change-Id: I5ae36286a865ca1459550b0a5cf538bf42b8ffa5
CRs-Fixed: 2534770
Add vendor command QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY_EXT
and attribute qca_wlan_vendor_attr_avoid_frequency_ext to send structured
avoid frequency data.
This new command is alternative to existing command
QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY since existing command is
using stream of bytes instead of structured data using vendor attributes.
Change-Id: I20c4836f9dd36f2e11e70a5b892db469a14c3746
CRs-Fixed: 2533156
Some chipsets don't have the capability to run agile Spectral with
160/80p80 modes. For this populate separate agile Spectral capability
for 160 MHz, 80p80 and non 160 MHz modes.
CRs-Fixed: 2549664
Change-Id: I7ae961d3f2bba33d1d3f73679f162823d54b6717
