HK needs support for sendaddba/senddelba cmds. These commands
need to be sent to the FW in tlv format. Make the necessary
changes.
Change-Id: Ia069a05dbbd710393ecab31c5bd2c1bcf28d0e1e
CRs-fixed: 2171669
Add ini to configure BTM offload configuration
which is sent to firmware as part of RSO start
via wmi btm config cmd.
Change-Id: I69c792705b208014af8f1878f7645d957dde6c06
CRs-Fixed: 2105112
The wmi data buffer offset passed to record command and event
buffer uses different offset and type for command and event.
Change the recorded wmi data buffer type to uin8_t pointer
for both, wmi command and wmi event record.
CRs-Fixed: 2164395
Change-Id: Ie759248a6a32632dd93f751a856a0588d9a11c25
DISA feature has been moved to a CLD component under the converged
driver model. Point the wmi API's and structures to the newly defined
files. Define new API's to extract parameters from event buffer.
Change-Id: Ia47d3682217e7ce9c021bb2db8319483c881b3b2
CRs-Fixed: 2161963
Add Objmgr ID and related definitions to support the newly
defined DISA component in CLD.
Change-Id: Ibbe5db39c01dae94cad5af5f4dccd2611c5b06d4
CRs-Fixed: 2159599
Refactor NAN target_if to make it wmi-type agnostic. Specifically
do not access wmi structures in NAN target_if. All the access to
wmi structures should happen in tlv and non-tlv specific wmi files.
Change-Id: I944b678fc501723d7cd26c9b21c4cc6ddb7fda4e
CRs-Fixed: 2159876
Invalid memory accessed in WMI_REQUEST_STATS_CMD, and it
causes kernel panic in the system.
Fix the invalid memory access in WMI request
stats function.
Change-Id: Id838569fd5667b118aecc03f7af5e5f9f146b2a6
CRs-Fixed: 2162279
Add host support to enable setting MSDUQ depth parameters per
TID per peer.
Parameters include MAC Address, TID number, update mask and
Q depth threshold value.
CRs-Fixed: 2162460
Change-Id: Ie947fd599278a04e13d6aa6c89f840187dbf17fa
Direct Buffer Receive provides the driver with a mechanism by which target
can transfer information directly into host memory via DMA.
Add support for the following service/events/commands -
1. WMI_SERVICE_SUPPORT_DMA
2. WMI_DMA_CAPABILITIES as part of WMI_SERVICE_READY_EXT_EVENTID
3. WMI_PDEV_DMA_RING_CFG_REQ_CMDID
4. WMI_PDEV_DMA_RING_BUF_RELEASE_EVENTID
5. WMI_DMA_BUF_RELEASE_ENTRY
Change-Id: I3949026b4542565c49bb538b9545ea607690c793
CRs-Fixed: 2158304
Add append bit in scan channel list command. If append bit
is set, new channels will be appended to existing channel
list else existing channel list will be over written
by new channel list.
Change-Id: I0b1ecd2b809aafe6e524a05aacd5b14c80640556
CRs-Fixed: 2159802
wmi_do_wow_disable_ack_event_id was named by mistake, rename it where
use it as wmi_d0_wow_disable_ack_event_id.
Change-Id: Ic11cb2a260b2ac65d0324d950d043988a7da6657
CRs-Fixed: 2160870
While sending probe response template down to firmware, driver
populates some items in data-structure which is not getting used.
Remove those unused items and send only what is needed.
CRs-Fixed: 2130437
Change-Id: I1878f523f0f88c354854dfdb75e60e66c4ecb0e8
WLAN Latency module (WLM) is added by fw to gain latency
because of schedule out of service like power saving,
scanning, roaming etc. per the level set by framework.
Change-Id: I6b8775e5f492b6f287d60d39610a544114185a23
CRs-Fixed: 2152290
CCE param disable is required for RAW Mode AMSDU cases,
RAW AMSDU frames causes CCE to crash, to avoid crash
disable cce component using CCE param.
Change-Id: I1b221e12ac69a873e995485c56a6ea5b310e727c
CRs-Fixed: 2132295
Add status recieved as part if WMI ready event into wmi_ready host param
structure to enable the removal of seperate API to extract status. Add
new param introduced by FW to indicate number of extra peers FW is
allocated for its internal use.
Change-Id: I7a9ed64d4a9d1f38397197c4c4a4114d8365eef7
CRs-Fixed: 2149878
Add offchan_data_tx_support service enum to map to new service bit for
this support.
Change-Id: I772d1d43e507469efc678f791ce92ef26eb844a5
CRs-Fixed: 2145450
This change adds support for sending tlv based WMI caldata version
check commands and adds necessary callback functions to process
and extract fields from respective WMI responses, also assigns
callback functions and populates event_id array with respective
WMI event id values.
Change-Id: Id61ec8364a627a5027923244c18f204b19d6234c
CRs-Fixed: 2133068
Enable FEATURE_WLAN_DOWOW for pcie.
This is for backward compatible with rome fw.
Change-Id: I41b9628179e81da682e6c6a9100d08ba7268f1a0
CRs-Fixed: 2070433
Request and process Beacon frames from FW using WMI command and event.
WMI_HOST_REQUEST_BCN_STAT is for beacon stats request and event processing.
Change-Id: I99250384868d62089a0f7d2acf94dd6e29ef67b9
CRs-Fixed: 2139393
Beacon offload control WMI command is used to control beacon tx in
beacon offload enabled mode. Add WMI API to send this command to FW.
Change-Id: I8b340b69ff508aaf80b9a80de044b0189b947a66
CRs-Fixed: 2140255
WMI ready event provides num_dscp_tid, num_total_peers and other
information that is used. Add API to extract these params.
Change-Id: I85ffc43f20935d84de133591020468c5e5f102de
CRs-Fixed: 2141667
Add support for configuring aggregate size for A-MSDU and A-MPDU
aggregations.
Add support for rate dropdown vdev param to dropdown rates for SU, MU
and MGMT packets.
Change-Id: I033693e1c21c05d06acd7df36eac580be19fe20b
CRs-Fixed: 2138655
Acked-by: Aditya Sathish <asathish@qti.qualcomm.com>
Firmware sends beacon/probe response, reassoc request and
reassoc response using new event WMI_ROAM_SYNCH_FRAME_EVENTID
when the data that it wants to send via WMI_ROAM_SYNCH_EVENTID
exceeds max length 2k in firmware. Add common changes to handle
WMI_ROAM_SYNCH_FRAME_EVENTID in such a scenario.
Change-Id: I62755dfa3c2a4b0ff9ee48fd5f24cc2e300b374f
CRs-Fixed: 2122432
Currently, WMI is exposing two command ops
(send_init_cmd and init_send_cmd) for init
command purpose which is leading to data/code
redundeancy. Perform clenaup for send_init_cmd.
Change-Id: I8f31ab45392cf2afb3cc34c633ba83ea42a3a835
CRs-Fixed: 2138507
Host enables thermal throttle depending on FW capability.
Add support to read this capability from ext service ready.
Change-Id: Ifafc24deac0bac228c98750f54e95fdfa3377a6a
CRs-Fixed: 2128049
SME module propagates KeyRSC to MAC/PE module but MAC/PE doesn't
pass this counter to WMA and due to which WMA is not able pass to
WMI module.
Add a fix to propagate KeyRSC field from MAC to WMA module and
WMA to WMI module.
CRs-Fixed: 2130765
Change-Id: I0de6907bf8aa159eccb1d8310e7027f8fdf19fff
Add support for sending periodic chan stats config command to target. Once
configured, host will receive the channel stats periodically as per the
configured period
Change-Id: Ic2b4692d0e2662ca590b925732f6cb33aac7a6de
CRs-Fixed: 2136759
RCPI is measure of received RF power in the selected channel for a
received frame and is measured at the antenna connector and shall be
measured over an entire frame. It is a monotonically increasing,
logarithmic function of received power level.
Wlan firmware computes RCPI.
Add host support to query firmware for RCPI information of
peer mac address in sta, p2p client, softap and p2p go modes.
Change-Id: I27fe45e993bd9b157fe33ca08a56330c1c950d16
CRs-Fixed: 1093187
Setting Gratious ARP request through iwpriv command is
not supported.
Add condition to set Gratious ARP request as method in
Keep Alive functionality
CRs-Fixed: 1114602
Change-Id: I299d39131e7ab0ebae6bd10f41bc4549debda048
It is required to send vdev-param HEOP to the target with
updated bss-color to enable HE BSS Color feature. Add
necessary code to support this.
Change-Id: I826bc5387dad8d044abcbc9cbdf69e93b59beb39
CRs-fixed: 2126605
fw_abi_version is used in WMI to check compatabilty of host and target
WMI interface. Cleanup handling to fw_abi_version.
Change-Id: Ia78c4683b9eff06d3c052df3921c024962abd828
CRs-Fixed: 2131311
Log the necessary debug information before freeing the dynamically
allocated memory while sending WMI commands
WMI_ROAM_CONFIGURE_MAWC_CMDID and WMI_NLO_CONFIGURE_MAWC_CMDID.
Change-Id: I10c8a96f8bb1a6cb661501f9ae9b9b21560980de
CRs-Fixed: 2094763
Currently, driver sends add/delete pmksa entry to fw
whenever supplicant sends set/delete pmksa to driver.
Add support to flush all PMKSA entries as well.
Change-Id: Iace843cdf26bf06f3e70703f87c082997a78b894
CRs-Fixed: 2094234
Both the unified DHCP offload struct dhcp_offload_info_params and all
of the function prototypes use "camelCase" which is frowned upon by
the Linux Coding Style. Replace the camelCase.
Change-Id: I3f2ce74bc150668b96b1946ef7b2d556c23dad94
CRs-Fixed: 2121485
Add cmn support for the following:
- Update ERP info in RSO Start
- Update HLP info in a new command WMI_PDEV_UPDATE_FILS_HLP_PKT_CMDID
- Set/Delete PMK cache info with WMI_PDEV_UPDATE_PMK_CACHE_CMDID
- Process FILS TLV in Roam Synch Indication and update the FILS info
[seq number,PMK, KEK, realm] to Supplicant.
Change-Id: I239bf5d6c4455d39181e335dbf73bcade16aee8e
CRs-Fixed: 2089128
FW reports build number in service ready and ext_service ready event.
Save these to display FW build version during brinup.
Change-Id: Ia86a392f826c5bb836be9353e3938ab1f811ab62
CRs-Fixed: 2125667
Adds support to dump dfs pulse information from firmware to host
for debug purpose.
Change-Id: I3b2042f8df6e077eed1a3847cd2d8550794bc6f7
CRs-fixed: 2121833
