Add changes to support new definition of
send_roam_scan_offload_mode_cmd() in connection manager.
Change-Id: Iea10907756ea785b0b0de72d01375f50ac3dbd6a
CRs-Fixed: 2758318
For older targets thermal mitigation is supported for the apps.
In moselle there is a new processor wpps on which firmware runs,
this commit adds the support for the thermal client wpps.
Change-Id: Ia212cd08c000ab11d4079cc701634dd919447ae9
CRs-Fixed: 2757932
Add service bit support for channel tx and rx time in channel stats.
This service bit helps in not interpreting the default values for
tx_time and rx_time when new driver version is used with old firmware
where this tx_time and rx_time support is not present.
Change-Id: Icc7668f5842677ac6ef48176568301753e217ea7
CRs-Fixed: 2751500
To send received raw event buffer to event handler
Send without processed buffer to registered event with buffer
type WMI_RX_RAW_BUFF
Change-Id: I2a401e2e7afbfd8f32d4bd521d184ed9ddcdb264
Rename struct wmi_mawc_roam_params name to wlan_roam_mawc_params.
Rename struct wmi_bss_load_config name to wlan_roam_bss_load_config.
Rename file wlan_cm_roam_public_srtuct.h name to
wlan_cm_roam_public_struct.h.
Change-Id: I3e05d899810f8e899b5d6f48a3aa48c041cd17e3
CRs-Fixed: 2758137
Currently, stats over QMI features can only be disabled over build flags,
which is not flexible. Hence, add a CFG ini item to enable/disable stats
over QMI.
Change-Id: If5d57d2fc781fecc8817c2da8f61a2f7977d9c77
CRs-Fixed: 2752310
FW advertises scan radio capabilities as part of service ready
ext2 event. This is an optional TLV, presence of which indicates scan
radio support for the that pdev.
CRS-Fixed: 2746769
Change-Id: I5a0231c54375e9f00c85f0ad92839e2fa6c79f39
Add service ready parameter to update the capability for Preamble Puncturing
Tx support from target. Add WMI support for configuration of Punctured
band setting from Host.
Change-Id: If5714c162356c35c7c385c4596043c0bc671be9a
Save BTM BSS termination timeout value and BTM MBO assoc
retry timeout value coming from FW through
wmi_roam_trigger_reason_tlv_param tlv.
Save Blacklist reason, Source of adding AP to BL, timestamp
which indicates the time when AP added to blacklist and
Original timeout value in milli seconds when AP added to BL
coming from FW through wmi_roam_ap_info_tlv_param.
Change-Id: I0a328814e77c7d2452672f43c855d2c1b8646b66
CRs-Fixed: 2744255
Add WMI support for WMI_TWT_SESSION_STATS_EVENTID. This event
contains stats for a given TWT session.
Change-Id: Ieca2b6845fd2ec32ccdfb1021611bed07379d365
CRs-Fixed: 2609951
Extract additional params obtained from fw as part of
WMI_TWT_ADD_DIALOG_COMPLETE_EVENTID during TWT setup
Change-Id: Ic58a1da463238a748cbf2678fe0156789ebb3559
CRs-Fixed: 2737036
The blacklist manager macro is connection manager specific, whereas
the macros used at WMI is dependent on roam offload.
Hence mark of dependency of FEATURE_BLACKLIST_MGR on
WLAN_FEATURE_ROAM_OFFLOAD.
Change-Id: If48b701a450d34915d57780a274311aa2590c89a
CRs-Fixed: 2746160
Save info related to WTC BTM roaming coming via
wmi_roam_trigger_reason_tlv_param.
Change-Id: Iec089ba48b2ff30c09838119144b2b0f0abf9e65
CRs-Fixed: 2740598
Macros like wmi_warn, wmi_alert, wmi_debug and others are not dependent
on WMI_INTERFACE_EVENT_LOGGING feaure. Move these outside to fix
compilation errors observed when this feature is disabled.
Change-Id: Ia585f4b947063828e2038d87b4736267d9aaad88
CRs-Fixed: 2742439
Add 'tx_flag' param to wmi_mgmt_params structure for configuration
to use incorrect key for encryption of mgmt frame.
The 'tx_flag' param is primarily added to provide additional
test configuration options for mgmt frames.
Currently it only has support to encode the mgmt frame with
incorrect key for PMF protected connection.
Change-Id: Id894c735c4c612a75506a33938372c3fa2e7f24a
CRs-fixed: 2690147
Add new channel bonding pairs as well as frequency
pairs for 40, 80 and 160 MHz with the support of
three new 5.9 GHz channels 169, 173 and 177.
Add new API reg_modify_chan_list_for_5dot9_ghz_channels
to enable/disable these new channels based on
INI value and service bit.
Change-Id: I8598e705ba4047e96e7167661ba70d4236cde251
CRs-Fixed: 2696211
FW sends a disconnect request to HOST while roaming failure
through event WMI_VDEV_DISCONNECT_EVENTID per vdev id.
Process WMI_VDEV_DISCONNECT_EVENTID and issue disconnection.
Change-Id: I0d3d2ddf0cab65eecbfc7676e9b21f2cc19971e2
CRs-Fixed: 2731954
Pdev parameter WMI_PDEV_PARAM_SR_TRIGGER_MARGIN is added to configure
the safety margin which will be used in calculating the acceptable
interference level for PSR based Spatial Reuse operation.
Add the host abstraction for the same parameter.
CRs-Fixed: 2729664
Change-Id: Iae542d4f7de23520ee00719e721d81e32737a191
Based on new macro ROAM_OFFLOAD_V1, define
send_roam_scan_offload_rssi_thresh_cmd to different
function pointer type.
Change-Id: I965b8c0a2a2660b9560d48a92ad693a7efb7aaff
CRs-Fixed: 2730850
Extract btm response and initial roaming stats coming
from FW through WMI_ROAM_STATS_EVENTID event as
wmi_roam_btm_response_info_tlv_param and
wmi_roam_initial_info_tlv_param respectively.
Change-Id: I680260276530368aab0e783bf4ef83edb0fe0d62
CRs-Fixed: 2728465
Define a new vdev param to set corresponding bit to enable/disable
a particular NAN feature.
Currently, Framework configures NAN DW as 4 seconds when the
device is in sync role and the screen is off. But customers might
want this to be 512ms always irrespective of screen off/on.
Send the vdev param on NAN vdev by setting the "bit 0" to 0 to
indicate firmware to ignore framework configured DW value and
consider the firmware default value.
Change-Id: Idcbdae94bd6a96fbbe15ec103a0aa558cdfcd572
CRs-Fixed: 2721980
Add interface changes for WMI_VDEV_BCN_LATENCY_EVENTID which
is sent by firmware to indicate the latency IE received from
connected AP in beacon.
Change-Id: Ia6cec01be89f13885b011414f0d77f64c6eb05ee
CRs-Fixed: 2723226
There are different version of SSID structure used in driver, replace
them with struct wlan_ssid.
Also move struct element_info from scan module to generic structures.
Change-Id: Ia32f82d943980c23b4ff478f5a06c5c053036de5
CRs-Fixed: 2721872
For STA + STA roaming, instead of WMI_PDEV_SET_PCL_CMDID, the
WMI_VDEV_SET_PCL_CMDID needs to be sent.
Declare the corresponding send_vdev_set_pcl_cmd wmi tlv ops for
sending the WMI_VDEV_SET_PCL_CMDID command.
Also add changes to read the peer create confirmation and dual
sta roam feature support firmware capability.
Change-Id: I21456cb2e4c0b2bb66bf341539d2070677c49d16
CRs-Fixed: 2702849
Firmware sends WMI_ROAM_CAPABILITY_REPORT_EVENTID event asynchronously
to host during FW init. It indicates FW roam related capabilities to host.
scoring_capability_bitmap in the event indicates firmware candidate scoring
capabilities. Host uses scoring_capability_bitmap to calculate roam score.
Change-Id: Idd2cad257e5d783166bd8cc0418dd4f394989295
CRs-Fixed: 2716781
The FW API is updated for pdev_id in the fixed param.
The pdev_vdev_flag is used to indicate whether the command
is meant for pdev or vdev.
The pdev_vdev_flag should be set to 1 for pdev command and 0 for
vdev command.
CRs-Fixed: 2693893
Change-Id: I99aabb9b73fd44d746342dfc1741fc6585c0863c
Host configures max ndi interfaces support to firmware using
WMI_INIT_CMD. In resource config of WMI_INIT_CMD, host updates
max number of ndi interfaces support and sends it to firmware.
Change-Id: I44ccbe726663bc18d3c69b4aae0b0e3e9c1501ee
CRs-Fixed: 2701559
Firmware uses the ESS report element information from beacon. For
roaming, station uses ESS report information to consider next AP.
Hence add support to send ESS RSSI roam trigger reason to firmware.
Change-Id: Id10cd3030d4dffde0bbcc883d582c5ca7e0f1005
CRs-Fixed: 2688520
Add support to populate 11AX wireless modes advetised in ext2 service
ready message. To support older FW that do not advertise this, use
existing host workaround to populate these in host itself.
Change-Id: I3b3b280672592c858bd3f6f0e368909a16bd30ee
CRs-Fixed: 2650136
Firmware advertises max number of ndp sessions support in
wmi_service_ready_ext2 event. If the firmware advertised value of
max ndp sessions is non-zero, then host uses a minimum of max ndp
sessions of target_resource_config and firmware advertised max ndp
sessions to configure max ndp sessions in firmware using WMI_INIT_CMD.
Change-Id: Ied6891157ce589e5d36a4f8b9694a95b5c819ad6
CRs-Fixed: 2688393
In struct weight_config, "oce_subnet_id_weightage" added newly.
Station uses "oce_subnet_id_weightage" as one of the parameter for
selecting AP candidate during initial connection. Host sends
"oce_subnet_id_weightage" ini value to firmware over WMI command
WMI_ROAM_AP_PROFILE.
Add oce_subnet_id_weightage in scan object scoring param to calculate
weightage based on SUBNET ID and select candidate accordingly.
Change-Id: I6583f46f661eaefabbad858bc7fb34e37443ebae
CRs-Fixed: 2675924
WMI_PEER_CHAN_WIDTH_SWITCH_CMDID sent from host fragments the
command based on the size of the WMI buffer.
Add support to instead use a FW regulated value taken from the
WMI service ready extended_2 event.
CRs-Fixed: 2684788
Change-Id: Iaeccf785c64b385bf2ad6bc372da239981143fa0
This commit enables support for SuiteB roaming wmi service based
on the WPA3 SuiteB roam service capability advertisement
received from Firmware.
In SuiteB the PMK length is greater than the existing PMK length,
added the extended PMK parameters to fill in the remaining bytes
of PMK in the RSO command.
Change-Id: Ia630580bba050513800e3acac875baf937ec8d14
CRs-Fixed: 2685993
