Changes needed for MLO soc attach to pass chip_id,
dp_ml_context from upper layer.
This change also takes care of assigning appropriate
RBM id for IDLE link descriptors based on chip_id.
Change-Id: I8f5f08c524d91942e6e458f048700b7bdd900107
Dynamic GRO feature is enabled by default and aimed for specific
customers. Add an ini control to allow other customers to config
this feature enable/disable.
Change-Id: I7f505599327ac131b3cdac9b4d9e038861b1aeb6
CRs-Fixed: 3074689
As part of code change we are removing csum_enabled flag check.
In that case, csum_enabled becomes redundant since we are not using it
in the code base, So remove redundant code as part of the cleanup.
Change-Id: Iac411b20f06436053b1969a1af9e3b3ee418c34c
CRs-Fixed: 3070858
Add dp functionality to collect stats for sysfs buffer.
Add both host and fw stats.
Change-Id: I64f84804d36cccec9d701925d96cc7ee96943b7a
CRs-Fixed: 3035864
Add changes to register separate function pointer to receive EAPOL
frames instead of using regular RX path and adding export symbol
for __qdf_nbuf_data_get_eapol_subtype() to access in it multiple
modules
Change-Id: Id05b982d31a7e008536d10dd5281e88cceba96db
Host updates BAR info to H.W when out of order or 2K jump
BAR frame is received. But some AP's frequently transmitting
out of order BAR frames even before reception of all the
frames in the current window, if station updates window
and SSN based on BAR frame, RX frames sequence number in
older window range which are yet to be received suffers
REO aging timeout and causes RX packet delay to avoid
this skipping BAR update to H.W conditionally.
Change-Id: If56571ffc0dc0880d7104ea3bb193ed9766124dd
CRs-Fixed: 3015643
Conditionally compile scan radio special vap stats.
Also rename spcl_vap to scan_spcl_vap to better reflect
funtionality.
Change-Id: I7d7f636209f6aa12cca0a3e808d7ae1fac9f397d
CRs-Fixed: 3009837
-Add flag to inidicate special vap configuration
-Add frame type counters while processing tlv
WIFIRX_MPDU_START_E
-Add function to update special vap rx stats
-Add dp pdev param to enable/disable special vap
stats reset
-Add function to reset special vap stats
-Add fucntion to get special vap stats
-Add CDP function to retreive special vap stats
Change-Id: Ia5de6743e472dc86c9e66b9e789c909a57025e35
CRs-Fixed: 3005425
This change will receive SCS procedure based parameters from
the control path and the peer will start building it's database
for traffic classification using SCS procedures.
Change-Id: I4fd7db595e0645285a95d0561eb46343238fa337
CRs-Fixed: 2970408
Add iwpriv option 34 to dump the reo rx h/w descs
in DDR for debugging. This cmd will first send cache
flush cmd to REO for all rx tids and invalidate the h/w
cache. Henceforth ensuring that the reo status tlvs and
the DDR values are in sync.
iwpriv wlan0 txrx_stats 34 0
Add fix to ensure bar frame with 2k jump err code is
processed correctly using the REO error code instead of the
REO push reason.
Change-Id: Ia05be668343f3a5d4b3262b8d6a367a50875add5
CRs-Fixed: 2895965
sequence number populated from tlv are incorrect for some frames.
Firmware populate correct sequence number for management and control
frame either in payload or tlv itself.
added field to get valid sequence number.
Change-Id: I21b1c34c0d66cb46c3a0baaaa231c952de065534
In security mode, allow only EAPOL frames in receive path
when peer is not authorized. This feature is enabled per VAP
based on vdev flag and will be applicable for all peers in that
VAP
Change-Id: Ic5dea09c2083f31e8cd301a0cdc3565f247b735c
Add cfg_dp_sg_enable to get ini key dp_sg_support by cdp_cfg_get.
And add some comments for CFG_DP_SG to clarify more.
Change-Id: I34de242eacbdcf55398afe64b91f5534f205fa22
CRs-Fixed: 2822536
Add the flag "is_exception", to indicate that the
packets belonging to this flow are not to be aggregated
by FISA.
Change-Id: I3c1e781d4a2ad251082dacc189f23ffab15ae002
CRs-Fixed: 2810360
Add a ini control field to control rx frame pending check
logic in WoW case. In some cases, power consumption is more
important than rx frame ping loss, so add a control flag
Change-Id: I8c4d3725edddb82a0f06dc70c22a8dd5243209f2
CRs-Fixed: 2806786
Use AST override feature to send out multicast packet in
4 address format. Pass per packet peer_id from osif layer.
Change-Id: Ic86120169c89e7972caa3cc8c967de72670314d0
CRs-Fixed: 2775051
- Added data structure for wds ext peer
- Enhanced DP peer structure to maintain
wds ext peer data structure, which inturn
maintain pointer to osif device.
- Enhanced DP vdev structure to maintain feature
configuration, which will be updated during vdev
creation when feature is flag is set at control
psoc.
- Enhanced cdp_vdev_param_type and cdp_config_param_t
to set wds ext configuration into DP vdev
- Enhanced cdp_cmn_ops structure and corresponding
call back definitons to get peer id, which will
be saved in osif private structure and to set
wds ext peer rx.
- Enhanced cdp_ctrl_ops to send event to control
path when 1st 4 address frame is received from
backhaul.
Change-Id: Ide0ea54e7b2d480ad646fb84b6e4e3108930f986
CRs-Fixed: 2773492
1. Add flag to support hlos id override feature in dp vdev
2. Update tid from nbuf->priority in dp_tx_send
3. Update tid to nbuf->priority in dp_rx_process
Change-Id: I66e8d77733a667f3f60b77e0d7bb444f7c5ad93d
As part of the VoW IGMP improvements, which deals with
conversion of igmp packets to unicast packets, the
following changes are done when the new feature is enabled:
1. IGMP/MLD packets with special addresses (addresses not
part of any multicast group) will be converted to all
existing clients of the AP. These packets will be
directly fed to igmp multicast to unicast conversion
module.
2. The IGMP/MLD packets with group specific addresses will
first go to multicast enhancement module, where they
will be allowed to pass and will be converted to unicast.
3. The new feature will be enabled only when multicast
enhancement feature is enabled, which will be ensured
at the configuration level.
FR : 61063
Change-Id: I2fd5a67766c806432fbe1a12cb9654a3600100f5
Add support to update the count of number of Punctured Preamble
PPDU's transmitted by the AP.
Change-Id: Id85a490e9e80566e639f48190a96d3107c6e5c61
CRs-fixed: 2755288
This change will add a build flag support to MSCS wherein
the functions will be called based on the status of the flag
created. This flag will be enabled by default.
Change-Id: I1c234c710d3b37f534ed2df7b37343cbd65ab930
CRs-Fixed: 2757257
Add INI to modify the HW checksum capability advertisement.
Add hook to update enable/disable of HW checksum for vdev.
Change-Id: Idd0bad1d39c8411c7b4ef19483aa2c75a756791b
CRs-Fixed: 2732099
This change will acquire MSCS parameters from the
MSCS request sent by the STA and provide it to the
data path which will later use it for building flow
database.
Change-Id: I972154792c682527f8df04de693077188726e8da
CRs-Fixed: 2669386
Peer wlanstats context was accessed directly from
PPDU cookie, with this approach the cookie pointer
may become stale if peer goes for deletion
Hence access the wlanstats context using CDP API
with stats context protection
CRs-Fixed: 2740261
Change-Id: I54c785325f8852ad422f05527b98ebca6e4d6cf0
Add support to retrieve per PPDU phy tx duration without response time.
Add support to retrieve per User phy tx duration for MU-MIMO and OFDMA.
These metrics are useful for ATF stats feature. Stats processing done
only if atf stats flag is set.
CRs-Fixed: 2709102
Change-Id: I90db41aa45843808e07343a80750c154abbde9cd
Add WMI support for WMI_TWT_SESSION_STATS_EVENTID. This event
contains stats for a given TWT session.
Change-Id: I01d5f7b30da803ee713a14c1d1124b8af7161bca
CRs-Fixed: 2609951
copying mu data info is done inside schedule command status tlv
and handling based on completion status is added.
Change-Id: I2792d754a4fa3e2992d68f569c9ce40be8ff02e2
New flag is added in PPDU user, this flag gets updated
on processing the user of a PPDU desc
Change-Id: Ib778b08833392bfd5651a83c2c1131f1d1ce3ea8
CRs-Fixed: 2738431
Currently, per-user information in Tx PPDU completion is allocated for
37 users though FW may send information for fewer number of users. In
new scheme, FW provides number of users in USERS_INFO TLV and host can
allocate the per-user struct based on this number. This can save memory
while processing each completion message.
CRs-Fixed: 2730923
Change-Id: If04fd664a1ef6e77e8eb44c5d2bd1fa89fcaba72
Currently there is a single INI item tcp_udp_checksumoffload to enable
or disable this feature for all the adapters. In some cases, we want to
be able to enable this feature selectively for NAN mode.
Add nan_tcp_udp_checksumoffload ini item to enable or disable checksum
offload feature specifically for NAN mode. If
nan_tcp_udp_checksumoffload is 'true' and tcp_udp_checksumoffload is
false, hardware checksum offload will be enabled only for the NAN
adapter and not for other adapters.
CRs-Fixed: 2693638
Change-Id: I6e255ce68ddc7b01ebdefe4e5e8d2c985388fefe
Configure the client as isolated peer if part of isolation
list while creating/associating the node or adding the peer
to the isolation list.
Do not forward the packets to and from clients in isolation
list instead accelerate to upper stack.
CRs-Fixed: 2689868
Change-Id: I67fd4dee0fb76c993746cdd66c70c241d407239a
Set OL_TXRX_NUM_LOCAL_PEER_IDS to WLAN_MAX_CLIENTS_ALLOWED
if WLAN_MAX_CLIENTS_ALLOWED is defined.
Change-Id: Ifb5c6ab15e791f92aa8503537e624195cf3fad6d
CRs-Fixed: 2694492
This mode is supported through hw_mode_id 7. A special mode for
IPQ8074 platform alone to bring up single pdev alone on 2G mode.
FW would advertise the mode 7 support through the WMI service
ready message and this mode will be the default mode for AP-HK10 alone.
Added preferred_hw_mode and target_pdev_id into dp structures so that
they can be used to configure the dp rings for this particular mode.
Also changed the lmac_id to target_pdev_id mapping for mode 7.
Change-Id: I3aae46fea13132eebaf7d37cff68ef517253d229
In case the bus is in low power mode, the register writes (followed by a
memory barrier) may take a long time (~4ms). This can cause the caller
to block till the PCIe write is completed. Thus, even though PCI
writes are posted, it can still block the caller.
Hence, in case the bus is in low power mode (not in M0), or not in high
throughput scenarios, queue the register write in a workqueue. The
register write will happen in the delayed work context. In other cases,
i.e ,when the bus is not in low power mode or in high thoughput
scenarios, do the register writes in caller context.
Change-Id: Idf218e4581545bc6ac67b91d0f70d495387ca90e
CRs-Fixed: 2602029
Add doppler and spatial reuse in ppdu descriptor to be able to use it on
HE information for tx capture
Change-Id: Id87a692a89d00c64929624c22c2efc27bc873e43
