802.11BE D1.0 9.4.2.295c.4 Supported EHT-MCS And NSS Set
field specifies maximum 4 optional EHT MCS map, which are
20 MHz-Only STA, BW <= 80 MHz except 20 MHz-Only STA,
BW = 160MHz and BW = 320 MHz.
Therefore set WMI_HOST_MAX_EHT_RATE_SET to 4.
Also add a debug message to log peer_flags_ext.
Change-Id: I3d56998bf0de381ef147d6c0551dcdb7fd935f60
CRs-Fixed: 2963536
Set the SAE EAPOL offload support in resource config based on
WMI_SERVICE_SAE_EAPOL_OFFLOAD_SUPPORT bit received in service
bitmap from Firmware.
Change-Id: I878736105c070df514dfe8d989541227b3baad11
CRs-Fixed: 2957082
Fill peer assoc mlo params in peer assoc request command.
Also add definitions to the WMI_SERVICE_11BE.
Change-Id: Ied7959e022ee27f3bd698b84dc801491175f85b3
CRs-Fixed: 2934417
In WMI_HOST_TP_SCALE, add an option to support 6% transmit power scale
configuration.
Change-Id: I11a67f0efd13ba2c7f2d8d546643a1af37f33613
CRs-Fixed: 2936987
Extract the 11BE flags advertised by FW in WMI_SERVICE_READY_EXT2_EVENTID
and update the regulatory pdev wireless modes. The wireless mode is
currently represented as 'uint32_t' and all the 32 bits are exhausted.
To accommodate the new 11BE flags, change the data type of wireless_modes
from 'uint32_t' to 'uint64_t'.
Add a regulatory phymode 'REG_PHYMODE_11BE' in enum reg_phymode.
If the chip does not support 11BE phymode, FW advertises it via
WMI_REGULATORY_PHYBITMAP enum with a value of REGULATORY_PHYMODE_NO11BE.
Extract the phybitmap and store it in the regualtory
as 'REGULATORY_PHYMODE_NO11BE' bitmap.
CRs-Fixed: 2901260
Change-Id: I4ed3fc7c907b1f76e59efb347c747acea2a163b0
Updated the EHT related variables as per latest fw cmn headers.
Address review comments from previous EHT gerrits.
Change-Id: I67cd58a4efcf3e06d2ca3b5570432593b1d80825
CRs-Fixed: 2902607
Add 320Mhz band width support and EHT capabilities information in
WMI peer assoc command.
Change-Id: Ie4ee95fb1790c828275e90b384b2bdc04efb3f29
CRs-Fixed: 2882054
EHT capapilities will be received as part of ext2 service ready message.
Update the structure as per firmware common header file and extract the
EHT capabilities field.
Change-Id: Id2dd170db4de588008742f95493d4d06a6431f1c
CRs-Fixed: 2857802
Add support to read the WMI service bit describing support
for the DCS AWGN interference detection mechanism.
CRs-Fixed: 2906768
Change-Id: Id062b9d63a09f522ac1efdbaf6731665fa438630
Add support for storing AWGN interference information for
dynamic channel selection
CRs-Fixed: 2903860
Change-Id: I5d0b6cc0a55303cfb27a02b99aba066557ad9c7d
Enable lower 6G edge channel ch2 (5935MHz) for APL2 6G regdmn
using a service bit WMI_SERVICE_ENABLE_LOWER_6G_EDGE_CH_SUPP,
which is not enabled by default.
Also, disable upper 6G edge channel (7115MHz) using another
service bit WMI_SERVICE_DISABLE_UPPER_6G_EDGE_CH_SUPP, that
is enabled by default.
Change-Id: Ia7cb7f7d3165375178adbe70adb19b8671496b6d
CRs-Fixed: 2885623
In order to support different power levels of 6G AP and client,
the channel list event from FW namely "REG_CHAN_LIST_CC_EVENTID"
is modified to add few parameters specific to 6GHZ devices.
Hence the existing event is replaced by REG_CHAN_LIST_CC_EVENT_EXT for
all 2G/5G/6G pdevs in FW. Therefore, after the service ready event, FW
sends the channel list for the configured country/regdomain via
REG_CHAN_LIST_CC_EVENT_EXT. This mandates that all host software need
to have the processing capability of REG_CHAN_LIST_CC_EVENT_EXT to bring
up the AP.
As there can be host software which has not yet implemented the
version of "REG_CHAN_LIST_CC_EVENT_EXT", backward compatibility is lost
if "ONLY REG_CHAN_LIST_CC_EVENT_EXT" is sent by FW.
Hence a 3 way handshake between host and FW is established.
1. FW advertises its capability of processing REG_CHAN_LIST_CC_EVENT_EXT
id via wmi service bit 'wmi_service_reg_cc_ext_event_support'.
2. If the host is capable of processing the "REG_CHAN_LIST_CC_EVENT_EXT"
event id (which is done based on registration of this event), host
sends the capability in WMI_INIT_CMDID setting a bit in host_service_flags.
3. Based on host capability advertised in WMI_INIT_CMDID, FW decides to
send the old event ("REG_CHAN_LIST_CC_EVENTID") or the new event
("REG_CHAN_LIST_CC_EVENT_EXT").
4. If there is no flag indicated by host to FW in WMI_INIT_CMDID, FW
by default sends the old event ("REG_CHAN_LIST_CC_EVENTID").
CRs-Fixed: 2876360
Change-Id: Ibe95f414ad9fff0e5641bcc6e60450ef9afe245b
FW advertises WMI_SERVICE_OCV_SUPPORT bit in service ready event if
firmware supports Operating Channel Validation feature.
Change-Id: Ida1ee9874f9cd32a684ceee728e3323306137c64
CRs-Fixed: 2880794
The host will send TPC power to FW via the new WMI cmd
WMI_VDEV_SET_TPC_POWER_CMDID going forward instead of
WMI_VDEV_PARAM_TX_PWRLIMIT to accommodate 6GHz channels.
But, to support backward compatibility for New Host+old FW
the TPC power will be sent to FW via legacy WMI cmds
WMI_VDEV_SET_PARAM_CMDID (during initial connection) or
WMI_VDEV_PARAM_TX_PWRLIMIT (power value change during RRM
req/bcn processing from connected AP) with the help of a
service bit WMI_SERVICE_EXT_TPC_REG_SUPPORT.
Change-Id: Iea1ecb62841c539c13a804ae9c475831b2d4c89c
CRs-Fixed: 2874250
Fix issue on enabling packet log.
Fix issue on logging CBF pkt in AP/STA mode.
Fix issue on setting data length 4 bytes aligned in pktlog header
, htt stats indication message header and Rx management TLV header.
Add CBF support for pktlog WMI enable command for firmware to enable
CBF receive.
Change-Id: Ib0067f32d7414be96503c4c67846c1312a59586e
Add SAP and P2P GO d3wow feature support config to send it down
to FW during WMI INIT such that FW is aware when SAP and GO with
client connected mode d3 wow feature is enabled.
Change-Id: I04b398f71727112ce5c536bbf2bfcfd4eefe2752
CRs-Fixed: 2866604
Add a pci gen switch flag in the wmi resource config to send
to FW in the init command.
Change-Id: If3a50d80103387a8f1f77ecb43a16c7b41ce5a11
CRs-Fixed: 2865866
Firmware advertises service capability WAPI_CONCURRENCY_SUPPORTED
if it supports other security modes when WAPI is active. Get the
same from service capabilities to decide whether to accept a
new concurrent connection or not.
Change-Id: I718503e52be2dda8ebd440f5a68b496d846b6ffc
CRs-Fixed: 2858770
Since in wmi_gpio_config_cmd_fixed_param, the input
0 mean output, and 1 mean input, which is different
from host side enum gpio_direction. So add this fix
to do the right conversion.
Change-Id: Id60a9327e853440fd58a45c7c839109cf1f22c22
CRs-Fixed: 2856833
Using this option the user pd assert and root pd assert can
be linked together or unlinked from each other.
By default, a user pd assert leads to root pd assert.
Unlinking the user pd assert from root pd assert helps in
handling the selective radio recovery seamlessly.
Change-Id: I734805b060bf1cb11a0dc325bae5dbf6ed7db83f
Initially, Host updates the AKM only after the EAPOL
handshake. Due to this, Enterprise auth is not detected
for initial connection.
Add AKM in peer assoc command(WMI_PEER_ASSOC_COMMAND)
to the firmware. In firmware, this will help to detect
Enterprise auth as part of connection and prioritize
the WLAN connection over BT traffic accordingly.
Change-Id: I6463dacbba098c76e6c3b7f4722915797bee1a99
CRs-Fixed: 2848392
Firmware has added TWT nudge, All TWT and TWT stats support.
This feature capability is advertised by firmware in service
ready. Add support fetch and store this information.
Change-Id: Ife3f9e4fbebd5e971c512115d924535a84bf82e6
CRs-Fixed: 2854129
Register the event handler for new WMI event,
WMI_REG_CHAN_LIST_CC_EXT_EVENTID. Extract the parameters to be used when
building the channel lists in the regulatory component. Update the reg
rule parsing function to include the new PSD flag and PSD power levels.
Change-Id: I0f5a747f98e43ac3d43b4aa1fb5958f0eac69a9d
CRs-fixed: 2843793
Fw advertise big data stats in response of host
command WMI_VDEV_GET_BIG_DATA_P2_CMDID.
Add interface change to handle BIG_DATA_P2_EVENTID.
Change-Id: I906afb71eb7f6bf95cd967a69d56fa333ecae177
CRs-Fixed: 2848445
Add CFO, agc_gain and rx start timestamp related parameters
to wmi_cfr_peer_tx_event_param and populate the same with
data from FW peer tx event.
Change-Id: I462fa56a854b18d1f9b46d1e14eea85da0d45f23
Add a new WMI service bit to indicate whether normal
Spectral scan is disabled.
CRs-Fixed: 2840128
Change-Id: I09314afeb5372f83b8356e06f245c83c7acbc85d
Add support for WMI_TWT_NUDGE_DIALOG_CMDID and
WMI_TWT_NUDGE_DIALOG_COMPLETE_EVENTID.
Change-Id: I9d4bf1061f6f08479967619ce50d2756c062f55f
CRs-Fixed: 2825138
The bcast twt functionality may need to be enabled separately
for requestor and responder roles. Enable such configuration
by looking up WMI service bit support from target:
wmi_service_twt_bcast_req_support
wmi_service_twt_bcast_resp_support
Change-Id: Ibc91173c23cf69f0d248af27d61c77bee3e8f48a
CRs-Fixed: 2828720
Add support to view station's peer RSSI value in auth and assoc request
packet by extracting rssi from probe request and passing it down to
FW in the auth request and assoc request mgmt frames.
Change-Id: I92f714ed815ab8c77f6a6b7df3363dc96f1119bc
CRs-Fixed: 2832982
