Send responder pm mode info in twt setup event and twt
get session parameter response.
Change-Id: I1f58e0bed62f152d84cec20ff7924d05e126347f
CRs-Fixed: 3029014
FW sends Spectral scan detector info TLV in WMI_PDEV_SSCAN_FW_PARAM
event to indicate the information of a detector participating in a sscan
session. FW sends one TLV of this type for each detector participating
in a spectral scan session. Add support to process the TLV and update
the spectral host data structures accordingly.
CRs-Fixed: 3044193
Change-Id: Ie17b6ea9336ada7a00e4594fa2f7f49ef3d443e5
FW sends Spectral scan chan info TLV in WMI_PDEV_SSCAN_FW_PARAM_EVENTID
event to indicate the channel information for a spectral scan session.
Add support to process the TLV and update the spectral host data structures
accordingly.
CRs-Fixed: 3044162
Change-Id: Ibbf7f6bbbb267123bbdf44bcfffa2cfb1c2926df
With this change add log with scan channels list dump to print
if NAN is enabled or not for any frequency.
Change-Id: I81f5017c7f146d2c7bd227601ae320d9cc67f82f
CRs-Fixed: 3042903
On Beryllium architecture, PHY DMA applies a 32-bit byte swap to assist
in efficient Host reads when connected to a big-endian Host.
This is done to avoid byte swapping at the Host.
So, if the Host reads this data 32-bit word at a time, the byte order
would be intact. Report headers are not a problem because as they are
composed of 32-bit words. For FFT bins, read each DWORD at a time and
extract FFT bins out of that DWORD. Make this change in a generic way to
keep the design uniform across different chipsets and endian modes.
CRs-Fixed: 3042188
Change-Id: Idff1ac7eb5e18c692c9ee8b19b9ae9e6b962d486
There is a requirement to use REGDMN and wireless modes in UMAC layer of
the cmndev component. As the WMI_HOST_REGDMN modes currently are defined in
WMI layer, we can't use them directly in the UMAC layer. Hence move them
to the reg_services_public_struct.h and rename them as HOST_REGDMN modes.
Replace all WMI_HOST_REGDMN instances with HOST_REGDMN. Wireless modes are
currently defined in WIN component, use them to cmndev component.
CRs-Fixed: 3044590
Change-Id: Iee5fa1745a1a44b834334746b10bdbb6f6563a0a
Add change to handle service_ready for,
1. Ema multi-MBSSID group support
2. Large beacon support greater than 1.5K
CRs-fixed: 3036717
Change-Id: I1c985faf429aacd78ae74fe0ffe18958fd6aa821
In extract_time_sync_ftm_offset_event_tlv there is a possible
OOB write when value of num_qtime received from firmware is
greater than FTM_TIME_SYNC_QTIME_PAIR_MAX.
Fix is to add a sanity check for value of num_qtime received from
firmware to avoid the OOB write.
Change-Id: I6e57b1d716992d1a3c7d2f7ea911fefcbfbeff34
CRs-Fixed: 3033509
Currently WMI_TARGET_CAP_FLAGS_RX_PEER_METADATA_VERSION_SET is used
to the htt peer data version, this looks like is for the firmware
and host should use WMI_RSRC_CFG_FLAGS2_RX_PEER_METADATA_VERSION_SET
macro to send back this infromation back to the firmware.
Correct the macro to se the htt peer data version to the firmware.
Change-Id: I06cb86eaa05eda45fb524c77acce3248c90498d6
CRs-Fixed: 3032308
The flag WMI_SERVICE_HW_MODE_POLICY_OFFLOAD_SUPPORT indicates
whether HW mode selection offload is supported by firmware or
not.
If it's advertised in service capability, host should not set
HW mode explicitly, firmware takes control of managing HW mode.
Change-Id: I8939b44fd7ed3a674c4da91524c5d5622bf67ce7
CRs-Fixed: 3017054
hw_link_id is unique across psoc to identify pdev in multi-soc ML cases.
Exract hw_link_id from mac_phy_cap and provide APIs in target_if to set
and get this for pdev
Change-Id: I9dcc4c1e4b515e83151ca88f5f026c0dd0b04646
CRs-Fixed: 3023496
Add support for AFC specific Host service flags to switch
between LPI only and SP+LPI, disable AFC timer and request ID checks
in target.
Change-Id: I34d6adcad6e4a2cd6383c941ed07b98059daeed0
Add host WMI APIs to send WMI_PEER_ADD_WDS_ENTRY_CMDID,
WMI_PEER_REMOVE_WDS_ENTRY_CMDID, and WMI_PEER_UPDATE_WDS_ENTRY_CMDID
to the Fw.
Change-Id: I32afdac7c366b647ee3196bcb76531295e640b8b
CRs-Fixed: 2997227
Add extract_roam_pmkid_request to wmi_ops to allow cld driver
to register the corresponding callback.
Change-Id: Ifa9cd73d6d62e7411b78b15086d7e166559f6d1c
CRs-Fixed: 3014249
Add extract_auth_offload_event to wmi_ops to allow cld driver to
register the corresponding callback.
Change-Id: Ie3417f44360021570ce678ce1c3f949a92424494
CRs-Fixed: 3010510
Add support for extracting Thermal Stats Events
from thermal event TLV for FW event
WMI_THERM_THROT_STATS_EVENTID.
Also, added support for FW Cmd to request for
Thermal Stats: WMI_REQUEST_THERMAL_STATS_CMDID
Change-Id: I2bc80d082bda45e2255371bcb0c31d35d9806525
CRs-Fixed: 3016845
Add extract_roam_stats_event to wmi_ops to allow cld driver to register
the corresponding callback.
Change-Id: I77ebb05a1a2ce9fa0b2f2f2ffb50c523ab9070e6
CRs-Fixed: 3007690
WMI_MGMT_RX_REO_FILTER_CONFIGURATION_CMD is used to the configure re-order
criterion for incoming management frames. Add WMI layer support for the
same command.
Change-Id: If1498fd4fbccd86e7d54d9eac268868b36523d06
CRs-Fixed: 2960472
When MGMT Rx REO feature is enabled, FW will be sending MGMT Rx REO
parameters TLV as part of WMI_MGMT_RX_EVENTID for the frames that require
reordering. Add APIs to extract the same.
Change-Id: I57b132927cf413384d680b5778bfe6a2e2737adf
CRs-Fixed: 2960471
The purpose of the multicast Domain Name System (mDNS) is to resolve
host names to IP addresses within small networks that do not include
a local name server.
It utilizes essentially the same programming interfaces, packet formats
and operating semantics as the unicast DNS, and the advantage is zero
configuration service while no need for central or global server.
Based on mDNS, the DNS-SD (Service Discovery) allows clients to discover
a named list of services by type in a specified domain using standard
DNS queries.
Here, we provide the ability to advertise the available services by
responding to mDNS queries.
Change-Id: Ie6a3cd319d219c2f338d83f4bdbd704a090711c4
CRs-Fixed: 3008552
When MGMT frames are consumed by the FW, FW sends MGMT Rx FW consumed event
to the Host. Add WMI layer functionality for this event handling.
Change-Id: Id95f41a717b88589e861781e1111b17dc90475be
CRs-Fixed: 2959118
In the WMI_MGMT_RX_EVENTID event handling, add a length
check to validate if the buffer length sent by the firmware
is less than or equal to the actual buffer length.
Change-Id: I7db9af48bc525543b972dcaf40aee0a05d8f5023
CRs-Fixed: 3001331
In the WMI_PDEV_FIPS_EVENTID event handling, add a length
check to validate if the buffer length sent by the firmware
in fixed params is less than or equal to the actual buffer
length before processing the data.
Change-Id: I7a952d3e3a2f66060451263b72118a52aa89dd06
CRs-Fixed: 3009887
Add new TWT teardown status code to indicate host teared
down the TWT session due to PS disable.
Change-Id: I49c2d7bb1abc4ceb4f79b833cbafcb44e8b936fe
CRs-Fixed: 3013358
With latest architecture there are different HTT peer
data versions supported by the firmware, supported htt peer
version will be sent in the service ready and need to feedback
to the firmware in the init command.
Change-Id: Icd0470843198387cd7e0192cbe3821d45ef0534e
CRs-Fixed: 3008706
Currently in function wmi_extract_dbr_buf_release_entry,
num_buf_release_entry & num_meta_data_entry are copied
to direct_buf_rx_rsp structure without any validation which
may cause out of bound issue if num_buf_release_entry or
num_meta_data_entries provided in fixed param becomes greater
than actual number of entries.
Fix is to validate num_entries and num_meta_data before populating
param->num_buf_release_entry and param->num_meta_data_entry.
Change-Id: I18050fd4f90f8815d7eceb5f715fdbaa09130d3a
CRs-Fixed: 3000875
Disable CP Stats for Beryllium emulation environment. These stats are
invoked heavily by userspace and need to be retrieved from the FW.The
userpace is holding the rtnl_lock while invoking these stats. This
prevents any additional commands to be sent while a stats command is
pending. Since in emulation environment, the turnaround time is quite
high, no iwpriv/ifconfig/iw command can be sent while the CP stats are
pending, making the driver in accessible from command line.
Hence, disable CP stats by simply returning 0 to the caller in emulation
environment.
CRs-Fixed: 2984362
Change-Id: I80aee6ce2bed1c37b964dd5e7194a66287301355
Add length sanity check for ibf cal value & phase delta
to ensure HOST always align with target defined length.
Also remove the REPORT_AOA_FOR_RCC flag usage.
Change-Id: I06e4a430143df1534849b8ec974e38932cff3ef1
CRs-Fixed: 2997030
Add new field ema_init_config to signal the configured value of
beacon size while using MBSSID feature in 6Ghz.
The current allowed range is 1500-3500 bytes.
CRs-fixed: 3004041
Change-Id: Id8cc1b7e4602b2e52b8eb215337070c6e3c26089
Add P2P_P2P_CONCURRENCY_SUPPORT service capablity to
validate whether fw can support p2p concurrency
support or not. when firmware advertises this flag it
can support MCC,SCC, DBS for p2p-GO/GC + p2p-GO/GC.
Change-Id: Ifec4bf984595b06374be9024601733c8537a9c3e
CRs-Fixed: 2984165
Add a function pointer to a function that converts host vdev param to FW
vdev param.
Change-Id: I01557d8bd87cb82548114626ff726aabba01dd19
CRs-Fixed: 3005160
Add debug prints when parsing the EXT chan list update event to dump the
reg rules received. The regulatory info is often updated and new bugs
are introduced every time so the prints will help narrow down the issue.
Change-Id: I229fa2e1432786c9a530f3a6035926135b2c4e2f
CRs-fixed: 3001297
