Add some 11BE files inclusion under feature flag to fix
compilation error when 11BE files are removed.
Change-Id: I809c5a3e3be2b6a7db35fa420714063b730ebe1d
Add change to handle service_ready for,
1. Ema multi-MBSSID group support
2. Large beacon support greater than 1.5K
CRs-fixed: 3036717
Change-Id: I1c985faf429aacd78ae74fe0ffe18958fd6aa821
6GHz do not have any dfs channels so do not update dfs related
parameters for 6GHz frequencies
Change-Id: I791622ce4b401bca65f132665eb2a1ebd7c9e931
CRs-Fixed: 3020653
In dfs test mode, 18 pulses are injected in a single burst, the host
driver reports the radar found event two or three times to
upper layer. For a single burst of radar pulses, radar found event
should be reported only once.
Fix the multiple radar founds for a single burst by disabling radar
detection and flushing the existing radar pulses from all queues
while processing the current radar found indication event in dfs test
mode (usenol=0).
Change-Id: I70c7c15147a5cde038773fd97735c113ca385932
CRs-Fixed: 2981217
DUT as SAP and its VDEV change to UP state, since got radar event but
channel switch disabled. Then EV_DOWN is dropped and bss peer won't be
delete. Which cause unloading failure. This change moves VDEV to
UP-UP-ACTIVE state if got WLAN_VDEV_SM_EV_CHAN_SWITCH_DISABLED.
Change-Id: I9d3a47a66fd2281166f5106e0e7bfd36c3966ed0
CRs-Fixed: 3009264
This change adds MLO support to Peer.
It implements,
1) MLO peer list management
2) AID allocation
3) MLO Peer creation/deletion
4) Notifying partner links on peer creation/deletion/assoc
Change-Id: Ie1b675dccdf0de1d79f6f32d9255cf3cca53fdf2
CRs-Fixed: 2967057
Add change to support max channel switch IE as a INI config.
With this INI enabled, max channel switch IE will be used in scenario,
where client disconnection is to be avoided with CSA on CAC channel.
Change-Id: I786e7e12e12ebcb3fc7d0720ed02e01bff6c82b8
CRs-Fixed: 2949206
Add support for multi vdev set param WMI API to send vdev param for
multiple vaps.
Change-Id: If7381f0b242cacff0817e6bdc16606d3d776b48d
CRs-Fixed: 2994278
A new TLV is added to send partner link CSA/ECSA count offset to FW as
part of beacon template. Add WMI changes to populate these TLVs in the
beacon template send function.
To fix the compilation issue, added forward declaration of 'struct
vdev_mlme_obj' and removed 'include/wlan_vdev_mlme.h' include file from
wlan_mlo_mgr_public_structs.h.
Change-Id: I6e421b29bb887bec711a23db1458aca4d112ade4
CRs-Fixed: 2983249
Add puncturing bitmap along with channel parameters
in vdev structures for filling during vdev start.
Change-Id: I5e5afd6e118ed9933e4d9c30e2ad65cd4259bca0
CRs-Fixed: 2958389
In the current implementation, csa_event_bitmap for CSA in the beacon
template WMI command is set to 0. Hence, the FW sends CSA complete event
to the host at the end of CSA complete.
Set the below values to csa_event_bitmap to get the current channel switch
count from FW to update the CSA/ECSA IE count in probe response frame.
1. WMI_CSA_EVENT_BMAP_ALL:
To get the CSA switch count event for every update to switch count.
2. WMI_CSA_EVENT_BMAP_SWITCH_COUNT_ZERO:
To get the CSA complete event only when the switch count becomes zero.
3. WMI_CSA_EVENT_BMAP_VALID_MASK:
FW to follow the bitmap for sending the CSA switch count event to the
host. Example,
0X80000000: Send the CSA event when the switch count becomes zero.
0X80000033: Send the CSA switch count to host for the count 0,1,4 and 5.
Change-Id: I8380d6badc3b84c72fde489e59b51b5ac122b97b
CRs-Fixed: 2978799
Add change to increase target_if start and stop
response timeout to provide enough time to process
event in slow processing platform
CRs-Fixed: 2965898
Change-Id: I839783331bd9fa4375aee81212005b0f2ac97255
New TLVs for MLO flags and partner link info are introduced in vdev
start WMI command. Add WMI changes to add these TLV in the vdev start
command.
Change-Id: Ic7d54c406f69346a6eedb43b1ebcf7266c448bd8
CRs-Fixed: 2958843
WMI vdev create is changed to incude mlo macdress as one of TLV.
Add changes in WMI vdev create send API to include this new TLV.
Change-Id: Ia13bdb8fbfc9f68d1e4c0209201f9acc4f575387
CRs-Fixed: 2958839
Configure the MBSSID info to FW for Tx AP connection to enable
MBSSID functionality in FW.
Change-Id: Ida415a5c8f1dcb66e8890595b5f3038a611d62a5
CRs-Fixed: 2959158
With the addition of MLO_SYNC_WAIT substate, now the active status
of the VDEV will be indicated by ACTIVE substate under UP state.
Add API to check if a given vdev is in UP_ACTIVE state.
Change-Id: Ia858765b07582f89e0eaa041d56c7f2aae6f1528
CRs-Fixed: 2924322
Resolve compilation issue seen when the IEEE 802.11be MLO feature flag
WLAN_FEATURE_11BE_MLO is enabled. For this, comment out a call to
mlo_handle_link_up(). This will be added back in a separate change
once it is ready.
Change-Id: I486899a79f44cccb3617498e29533f9589ef3fb7
CRs-Fixed: 2925804
For MLO SAP, it can't generate beacon template until all the vdevs
start. To synchronize MLO vdevs start, we add two new substates
WLAN_VDEV_SS_MLO_SYNC_WAIT and WLAN_VDEV_SS_UP_ACTIVE whose parent
state is WLAN_VDEV_S_UP.
Once vdev gets vdev start rsp, notify MLO mgr, who checks whether all
vdevs are active, if so, trigger WLAN_VDEV_SM_EV_MLO_SYNC_COMPLETE for
the vdev which is in WLAN_VDEV_SS_MLO_SYNC_WAIT state.
After vdev translates to WLAN_VDEV_S_UP, MLO SAP will translate to
WLAN_VDEV_SS_MLO_SYNC_WAIT, while the other vdev will translate to
WLAN_VDEV_SS_UP_ACTIVE.
MLO sap will notify MLO mgr once it is in WLAN_VDEV_SS_MLO_SYNC_WAIT.
Then MLO mgr checks whether all the vdevs are active, if so, trigger
WLAN_VDEV_SM_EV_MLO_SYNC_COMPLETE for the vdev which is in
WLAN_VDEV_SS_MLO_SYNC_WAIT state.
If MLO SAP receives WLAN_VDEV_SM_EV_MLO_SYNC_COMPLETE in
WLAN_VDEV_SS_MLO_SYNC_WAIT state, it translates to WLAN_VDEV_SS_UP_ACTIVE
Change-Id: I8be9c02f62719dbdcf4af79d83173c316c64b765
CRs-Fixed: 2866103
The wlan_minidump_remove function utilizes the updated kernel API.
So, modify the function definition and parameters accordingly.
Change-Id: Ib62a46688400d5d9c2ff45c17dc41d5f0b7f58d0
CRs-Fixed: 2860432
For STA mode with STA CAC enable in auth/assoc state of assoc sm,
a northbound disconnect request would have to wait until CAC and
assoc is completed and connect request is removed from serialization
queue. During which OSIF timeout is seen as CAC can exceed the
serialization timeout of 60s.
Add change to handle EV_DOWN in disconnection progress state which
brings down the connection immediately on receiving a disconnect
request.
Change-Id: I301e49164c69df99e4617dd6fbc012e449963521
CRs-Fixed: 2882876
This change notifies MLME about DFS CAC WAIT state,
and removes code, which releases PDEV RESTART and
enqueues STOP-START command
Change-Id: Iaaf4b657c4f95330e3ac383adc74211b23006718
CRs-Fixed: 2862724
If STA DFS is enabled before vdev creation through etc/config/wireless
then VDEV START is sent to F/W as a part of the normal flow to bring
the VAP up. However, if STA DFS is enabled/disabled on the fly for a
running VAP then do a VDEV STOP, followed by a VDEV START of the STA
VAP and set/unset WMI_CHAN_FLAG_STA_DFS flag in VDEV start.
Change-Id: I032ffa53d89eaafcb43c648670af3b3f2134561f
CRs-Fixed: 2843248
Currently on vdev start WMI_CHAN_FLAG_DFS flag is being set
irrespective of the device mode which may lead to unexpected
behavior in FW.
To address above issue set WMI_CHAN_FLAG_DFS flag in vdev
start only if vdev is operating in ap mode.
Change-Id: I96b291ad137b96e40c6620c86f50860670595ae0
CRs-Fixed: 2808013
Add support to send preferred_xt_streams and preferred_rx_streams
in multivdev restart.
CRs-Fixed: 2833470
Change-Id: I2c06a8bd9a64b15126e216eeb65699e104cbca64
Add change to support mlme ops to enable enqueuing stop-start
cmd to serialization queue when CSA is triggered for a DFS channel.
Change-Id: I9f2dca3bc4ccfe40bd40c7e04b3ce035df56d19d
CRs-Fixed: 2825760
Compiling with gcc 9.3 will cause many implicit-fallthrough
compile errors.
Fix is to add keyword fallthrough to resolve such compile error.
Change-Id: I2e7dd1525861d951e3be44f6665e149499f0f5d6
CRs-Fixed: 2785178
dfs_curchan isn't reset when start vdev on 2G channel, can't use it.
Reproduce steps:
1. DUT vdev1 SAP started on 5G DFS channel with HE160,
WMI_CHAN_FLAG_DFS_CFREQ2 is set.
2. DUT vdev1 SAP switched to 2G channel.
Found WMI_CHAN_FLAG_DFS_CFREQ2 still set.
Change-Id: Ic5282ddf667af92365f3e43274a010a26a5a0715
CRs-Fixed: 2787305
This will help to configure desired rate mask. It can be
used to optimize link performance.
Change-Id: I15b6fbc512d9b0869a6ad6a6f24f1593abf14dae
CRs-Fixed: 2758871
This change allow Tx VDEV of MBSS mode to configured
dynamically by reset the VDEVs.
This change includes FW service bit parsing, checking
VDEV state of all VDEVs, sending MBSS information in
VDEV start command
Change-Id: I46b13629bd1c07be86b408d72c2967642ce8542e
CRs-Fixed: 2759229
For SAP on DFS channel, the PCIe link down should be prevented
so that HalPhy can access DDR memory to report Radar found event.
Change-Id: I5eb1076196c509f0279781dbe3269d62132aeabc
CRs-Fixed: 2712800
Special vap type is used by scan radio solutions.
Indicate special vap type to FW through
vdev create WMI command.
CRS-Fixed: 2746724
Change-Id: Ie5e4b059306c5c80d93dba0ebb4810b3e570878f
Both (ETSI) PreCAC and RCAC are going to use use the same state
machine. The state machine drives the Agile engine and not very specific
to RCAC or PreCAC, therefore let the state machine be called agile state
machine and change the names of all the associated variables accordingly.
In this preparatory change, modify names of all APIs, states and events
to make them common to Agile RCAC and Agile PreCAC
Change-Id: I67858839589145bf4377a7eafec7c21ca4823141
CRs-Fixed: 2711104
In case of MBSSID, fils or 20tu unsolicited probe response frame
is required to be sent only by the tx-vdev. 20tu frames (fils or
probe response) sent by the tx-vdev carries the specified information
about the non-tx vdevs.
Currently, fils_enable wmi cmd is being sent by default to fw at
vdev_up of each vdev. Avoid sending this cmd in case of non-tx
vdev in MBSSID mode.
Change-Id: I6d6f85489baf34b282f012227f211388647fdb4e
CRs-fixed: 2727143
There are different version of SSID structure used in driver, replace
them with struct wlan_ssid.
Also move struct element_info from scan module to generic structures.
Change-Id: Ia32f82d943980c23b4ff478f5a06c5c053036de5
CRs-Fixed: 2721872
Add change to return the error value to the caller in case when
the VDEV start fails for STA VDEV.
Change-Id: I8585e1233609113158231ec7104cf5046af23cd5
CRs-Fixed: 2698826
Add change to define restart bitmap using the generalized bitmap
declaration. Also use generalized function to check if any of the
bits are set in the bitmap.
Change-Id: I06859fc089f121559231a7e13bcab63322e5ef9b
CRs-Fixed: 2690914
Enhanced Multi-BSSID Advertisement is an enhancement to the
existing Multi-BSSID feature in terms of advertising
non-transmitted bssid profile using the transmitted bssid
beacon. Mandatory inclusion of RNR IE in lower-band AP
beacon to support Out-of-Band Advertisement of colocated
6Ghz AP may impose limitation in the beacon size. EMA AP
provides a standardized way of overcoming such a limitation
Relevant UMAC changes are:
1. Add fw_caps_ext support bit WLAN_SOC_CEXT_EMA_AP
2. Add vdev_control_flag WLAN_VDEV_MLME_FLAGS_EMA_MODE
3. Support of 32-bit ema_params in beacon_tmpl_params.
The 4 octets in this param field will respectively
indicate ema_beacon_profile_periodicity, ema_beacon_tmpl_idx,
ema_first_tmpl and ema_last_tmpl in the order of low to high
CRs-fixed: 2677701
Change-Id: I3d96fd3becd7609abb2529f977362bfa5401d600
Trigger Rolling CAC SM events from
- NOL expiry (EV_RCAC_START) to trigger RCAC START with a
new channel if possible and not already running.
- Agile radar (EV_ADFS_RADAR_FOUND) to restart RCAC with a
new random channel.
- vdev restart (EV_RCAC_STOP) to stop the running RCAC when
the primary channel changes. Start will be based on the
availability of the new channel.
In case of the rolling CAC feature, a channel is programmed to
the agile detector on which CAC is running continuously.
Introduce an API that finds an RCAC completed channel and return
the channel params which will be used for the next channel
change.
Also add a boolean argument in dfs_set_current_channel api to
indicate if the dfs current channel is updated in the API
"dfs_set_current_channel".
CRs-Fixed: 2674621
Change-Id: Ica54a57f131cd54e47138f1cbeef2dd0023390ed
