This change adds camnoc interface changes and CPAS version change for
Cliffs camera. It also add support for ife, csid and sfe.
CRs-Fixed: 3609762
Change-Id: Icddfd38330022b8ebc7f785ba3c97cc055e70d74
Signed-off-by: Dharmender Sharma <quic_dharshar@quicinc.com>
This change adds support to read/write any sensor
devices that are on i2c, whether using cci or qup.
The debugfs file is mounted on i2c subdir under
camera root directory in debugfs.
Given that these devices are not always turned on,
and that this power on/off sequence is controlled
by userspace, this change displays all available
i2c devices, and their power states.
The user then can read/write to those devices which
are turned on, according to the following:
Usage:
- echo (anything or empty string) > i2c-rw
- cat i2c-rw then displays usage, and states of devices
- echo (proper r/w format) > i2c-rw
- cat i2c-rw displays output/error
Note that cat output is not persistent, it gets cleared
after displaying once.
CRs-Fixed: 3385104
Change-Id: I22023e0a8d9a680b5c8578cae2aa253c4c90226f
Signed-off-by: Li Sha Lim <quic_lishlim@quicinc.com>
Adds support for new mink call to configure secure
camera sessions. This new mink call takes in additional
parameters to support the new domain-id based
security scheme. The additional parameters are in the
form of csid_hw_idx_mask, cdm_hw_idx_mask and
vc_mask. These are in addition to the existing PHY idx
and CPHY/DPHY lanes info.
The introduction of this new mink call deprecates the
existing SCM call used to service secure camera sessions.
What this means is that on all subsequent versions of this
driver, all secure camera sessions will be serviced by this
mink call, which is able to accommodate older and newer targets,
and their programming of different register sets.
This design enables the cam_csiphy_notify_secure_mode
wrapper to remain the same, with the underlying mink call
made in the cam_compat layer, depending on camera driver
version.
CRs-Fixed: 3317248
Change-Id: I05511f4380ce5467b104675c07c9c8faa5318af8
Signed-off-by: Li Sha Lim <quic_lishlim@quicinc.com>
This change allows the tpg hw register configurations to be directly
programmed from the tpg xml file. The regsettings array can be configured
with the right configurations for the required mode, if regsettings are
not provided in regsettings array. The settings are derived from the
stream configurations and global configurations.
CRs-Fixed: 3289930.
Change-Id: If44678475986efc0f26c334f5db4f9c59cd6873b
Signed-off-by: Shivi Mangal <quic_smangal@quicinc.com>
Add support to create, release, signal and import a synx object
using the existing generic fence operations. Handle signaling of
underlying synx object when a sync object is signaled & vice versa.
CRs-Fixed: 3317280
Change-Id: Ia6fac6eb732ed7091ec62f04875bdb30d88c8676
Signed-off-by: Petar Nedev <quic_pnedev@quicinc.com>
Create OFE HW layer which contains device, soc, and core files.
Device file provides the prob functionality and OFE dev interface
to ICP HW MGR. Core file provides HW related functionalities such
as PC, reset, init/deinit hw, etc. Soc file provides intermediate
functions to utilize camera soc APIs such as DT parsing, Clock
update, etc.
Modify Kbuild to include compilation of the source files. Update
camera main file to invoke ofe init module function during camera
module init. Update camera main header file to allow CRM to match
OFE driver for component bind.
Update OFE HW register addresses such as power status/power ctrl,
reset, irq, etc.
CRs-Fixed: 3266673
Change-Id: I97efe095801b1b42e9de07aeba6f26112cb8f92b
Signed-off-by: Sokchetra Eung <quic_eung@quicinc.com>
Remove direct shell commands from Android makefiles to better make use
of android function definitions.
Also changes mmrm dependency to be based on whether or not the driver
is detected in the build before setting it as a dependency.
CRs-Fixed: 3298147
Change-Id: I0d5f2c9eb34ac635604c515638c9f00e29ae0b2a
Signed-off-by: Suraj Dongre <quic_sdongre@quicinc.com>
Add support to create, release, signal and import
a dma fence. When a sync object is imported for a dma fence
signal the dma fence when signaling the sync object with
appropriate status. This is achieved by implementing
generic fence scheme. The change also adds support
for batched fences.
CRs-Fixed: 3207212
Change-Id: I23fbc0992281cfee0303e213a30bce138ae7bdff
Signed-off-by: Karthik Anantha Ram <quic_kartanan@quicinc.com>
Add i3c bus support for qup i3c based
I3C target.
CRs-Fixed: 3169593
Change-Id: I0209f799d800daf9afe7a846310a3d4f4f2ee420
Signed-off-by: Jigarkumar Zala <quic_jzala@quicinc.com>
Signed-off-by: Jigar Agrawal <quic_jigar@quicinc.com>
Rename all instances of a5 and lx7 to icp_v1 and icp_v2
respectively. Remove all mentions of lx7 or a5 in icp_hw_mgr.
Relocate lx7_hw and a5_hw directories to a new directory -
icp_proc which contains a new file to provide related a5 or lx7
interfaces to icp_hw_mgr. Thus, icp_hw_mgr is agnostic to icp proc.
Place common functions and common global constant into icp_proc_common
file. Remove a5/lx7 soc files and create a common soc file for both.
Modify kbuild file to account for directory or file changes.
CRs-Fixed: 3162183
Change-Id: I7e0cfd2a2917f129097a517af3bd39578f85293d
Signed-off-by: sokchetra eung <quic_eung@quicinc.com>
This change enables the compilation for flash even
though there is no pmic flash support, since the i2c
flash still needs the flash framework.
CRs-Fixed: 3095773
Change-Id: I220a38dce1cbc829e446a65c61b7b7eb6b3a1c5b
Signed-off-by: Depeng Shao <quic_depengs@quicinc.com>
Parrot has different version of CPAS which requires
camnoc interface changes and CPAS version change.
This change adds the same.
CRs-Fixed: 3081144
Change-Id: Icf39e12d3af8518471b093c860888df05af279b7
Signed-off-by: Alok Pandey <akumarpa@codeaurora.org>
Cape has different version of CPAS version which
requires camnoc interface changes and CPAS version
change. This change adds the same.
CRs-Fixed: 3063982
Change-Id: Iaca2f12954cc12224da6c8cdb2ee76f2b14aca0b
Signed-off-by: Alok Chauhan <quic_alokc@quicinc.com>
Diwali has different version of CPAS version which
requires camnoc interface changes and CPAS version
change. This change adds the same.
CRs-Fixed: 3043114
Change-Id: I698b251c43d34225053ab3a0e9c581201d6be638
Signed-off-by: Ayush Kumar <ayushkr@codeaurora.org>
Based on arch, config flag can be set for presil and when enabled,
presil code will be compiled.
CRs-Fixed: 2932495
Change-Id: Iabf1a74be3582d0b84b70777e406b4ce02218220
Signed-off-by: Mukund Madhusudan Atre <matre@codeaurora.org>
Signed-off-by: Suraj Dongre <sdongre@codeaurora.org>
Add new tpg subdev driver. This change exposes the tpg hw as a new
subdev similar to that of a sensor driver.
CRs-Fixed: 2973850
Change-Id: I6fdb4457d8cc829546896f26bdde8765a4258e7c
Signed-off-by: Tony Lijo Jose <tjose@codeaurora.org>
In upcoming targets, TPG will be supported as a separate node.
This commit removes the tpg code from ife/tfe hw manager.
CRs-Fixed: 2973850
Change-Id: I031302756d85e004fc3a07f9864daf2c16dd837b
Signed-off-by: Gaurav Jindal <gjindal@codeaurora.org>
Add CSID640 support. The following features support are added:
- QCFA binning and BAYER binning support
- Format measure support
- Multi VC DT support
- Add core_cfg support in in_port structure
CRs-Fixed: 2887030
Change-Id: Idd7d081c985f3ef21e0fee7ce4c1b8db96ddd3c3
Signed-off-by: Wyes Karny <wkarny@codeaurora.org>
Starting from waipio, ICP [lx7] FW is to loaded using
secure PIL. For debug purposes also added support for
non secure image loading for lx7.
CRs-Fixed: 2722486
Change-Id: I30026fb8e65f323ab73336e0ae787a2359bc934f
Signed-off-by: Karthik Anantha Ram <kartanan@codeaurora.org>
SFE config is not needed since it shares the same code paths as VFE.
As such we deprecate the config and enable SFE whenever ISP is enabled.
CRs-Fixed: 2835738
Change-Id: I5e6b44345e9eaabdb3a91d3662322f3dec53761b
Signed-off-by: Karthik Jayakumar <kjayakum@codeaurora.org>
Add initial support for the LX7 processor.
Support for firmware loading and processor boot are
still pending. Note this also cleans up some descriptions
in struct cam_icp_hw_mgr that were left over when the
debugfs entries were renamed.
CRs-Fixed: 2722486
Change-Id: I626cc27e26e1ebac8ec6b4509ab5da2a013457b1
Signed-off-by: Karthik Anantha Ram <kartanan@codeaurora.org>
To support external module compilation on Waipio, camera dt-bindings header
files need to be moved out of kernel SI and into the camera-kernel vendor SI.
This is to maintain seperation between the two SI's.
CRs-Fixed: 2835738
Change-Id: I8d63b48b6d406ed7b4a07f3bd4f1721ecd2dd0b0
Signed-off-by: Karthik Jayakumar <kjayakum@codeaurora.org>
Adds support for camera kernel driver source being moved to Vendor SI.
CRs-Fixed: 2835738
Change-Id: Ibb876edb1284bc77c366c3ef9e1ee9a39981c960
Signed-off-by: Karthik Jayakumar <kjayakum@codeaurora.org>
