handling multicast packets in the case of proxy arp
along with MLO MCAST.
1. stamp the host inspected bit for GSN based packets.
2. trigger dp_tx_proxy_arp from the reinject handler.
Change-Id: I8aea1e4fd4e61f4cc6a5dd6d8b5151c1a9bf2fac
CRs-Fixed: 3465975
With the convergence of SCS and SAWF, do not override the TID
for legacy SCS case. Retain the value obtained using DSCP in
this case.
CRs-Fixed: 3460620
Change-Id: I19502d09f5f37376bac08eb05fcf770c71331e1c
As we are using index_look_up_overwrite field in TX
descriptor with WDS_EXT need to reset this field in
FAST TX API even in AP mode
Change-Id: I6027a2d99be715973af5f8091755f0a4a9256010
CRs-Fixed: 3450922
Add DP API to evaluate if TX ILP needs to be enabled,
it is only enabled if following two conditions are met,
(1) INI for TX ILP is enabled
(2) htt msdu index to qtype mapping table index 3 value is
HTT_MSDU_QTYPE_LATENCY_TOLERANT
Change-Id: I4d0c1103941b8b12b8441762dc6b45d28ee1df21
CRs-Fixed: 3447096
Add support to handle the extended Tx completion
statistics during direct switch mode.
Change-Id: If1b6906d5d2b3156ead8ef039524f47e763cb543
CRs-Fixed: 3431840
WCN6450 is a chip based on Rhine architecture. Unlike LI/BE targets,
chipsets based on Rhine (RH) do not have host facing UMAC HW blocks.
Their corresponding SRNG interfaces are also removed. The functionality
of these UMAC HW blocks is replaced with a software implementation in
the firmware. Communication between the driver and firmware will happen
over copy engine (CE).
Although there are no host facing UMAC HW blocks, the CE hardware used
in WCN6450 expects the host driver to use the TX descriptor (HW) format
of LI targets during TX packet enqueue. Therefore it is required to
create a new pool of TX descriptors (HW) pool for WCN6450 that is used
during TX.
The logic to create/free/init/deinit these descriptors is specific
to WCN6450/Rhine, therefore it is implemented in architecture specific
Rhine code.
Introduce new APIs in struct dp_arch_ops {} to allocate and free
arch specific TX descriptors. These ops will be no-op for LI/BE
architectures.
Also for Rhine targets, allocate/free other TX descriptors like TX EXT &
TSO descriptors as part of the arch APIs.
Change-Id: I452ac69143395881ab8580355a0f75571dc3e929
CRs-Fixed: 3381711
Reuse the tx descriptors released in tx completions
without releasing the associated skbs to reduce
the cpu utilization in direct switch mode.
Change-Id: I4ab3ac58977a626344877b8a818a4dbc4864aaf3
CRs-Fixed: 3393968
The kernel-doc script identified a large number of documentation
issues in dp/wifi3.0/be, so fix those issues. In addition, there are a
number of instances where public functions have their implementation
documented instead of having their interface documented, so move that
documentation.
Change-Id: I15c8570aa1832ed053fa38f536fa36b2ca0aa56b
CRs-Fixed: 3373157
Incremented an counter when wifi FW drops the packet in DS mode
with reason as FW2WBM_TX_STATUS_DROP and we can dump it
via 260 output
Change-Id: Ieb52b0af6dca66732f34cc7f1cfba5c467e9507f
CRs-Fixed: 3383509
If TX data is TCP ACK, configure TX flow index 3 in
SW2TCL data cmd ring descriptor.
Change-Id: Ibd08b13ba8f0481aa11cd9c3dc54a49cd73674fb
CRs-Fixed: 3368303
Currently HTT_TX_FW2WBM_TX_STATUS_DROP and HTT_TX_FW2WBM_TX_STATUS_TTL
are mapped to HAL_TX_TQM_RR_REM_CMD_REM which results in the wrong Tx
status print in case HTT_TX_FW2WBM_TX_STATUS_TTL where No ack is received.
So to fix the status log issue map HTT_TX_FW2WBM_TX_STATUS_DROP to
HAL_TX_TQM_RR_REM_CMD_REM and HTT_TX_FW2WBM_TX_STATUS_TTL to
HAL_TX_TQM_RR_REM_CMD_TX to log correct Tx Fail Status.
Change-Id: If125313f6b831ce5ca0f7eec9e8e3f1a03229f16
CRs-Fixed: 3362679
Currently, we record TX musdu number and packet length, which falls into
three categories: from stack, from host and successfully transmitted. In
TSO mode, the msdu from stack will be divided into several fragments and
each of the fragment will be transmitted as an individual msdu. This change
will take TSO into account when it comes to the 3 forms of TX statstics.
Change-Id: Ie11cb7541b4e109609bf3104739a5e19f51dcc13
CRs-Fixed: 3361412
Special frames like EAPOL should not be dropped as it would cause
failure in connection. To prevent the dropping of higher priority
special frames, reserve a set of descriptors from the tx descriptor
pool.
Check the regular soc or pdev limit for the allocating tx descriptors
for the regular packets and use the reserved set of descriptors
only for the special packets.
CRs-Fixed: 3331359
Change-Id: I15532fb5e325ba6ad997090008bda8c52707a05b
1. Change the names of parameters and functions related
to direct switch feature from ppe to ppeds
2. Remove the unused ppe_release_ring
Change-Id: I5a95b1273e338f354903af98158578ac65758a8a
CRs-Fixed: 3345097
1.Add check in Tx completion path to handle
mcast packets from all ML partner vdevs
2.Handle cases where a ML mcast vdev can be
deleted and started as NON-ML vdev and
viceversa by adding reset ML mcast conf.
3.Optimized Register configurations for Mcast
at Init/Delete and Start/Stop AP
Change-Id: Iab8a5a081e2e0377509574d362754d32c5b83df2
CRs-Fixed: 3350350
Suspect HW update WBM2SW ring HP, but the ring entry contents are
not updated accordingly which then host will fetch one stale ring entry,
this makes other TX packet are freed unexpectedlly.
Add change to detect this situation earlier, if HW cookie conversion is
done, then invalidate 2nd dword for upper 32bits of VA, so next time when
reap this ring entry contents to know if this desc is updated by
HW or not. if HW cookie conversion is not done, then compare the PA in
buff_addr_info with PA in current TX desc to check.
Change-Id: I351eb4f860216fc618ff28736d4832fcec45dcc5
CRs-Fixed: 3345935
Add ring id info in TX HW descriptor event history,
this helps to map history event to corresponding HW TX
ring in multi TX queue enabled case.
Change-Id: I82dcece76b1342f4086d489ba489da7c20ea6cad
CRs-Fixed: 3294177
bank id is newly added in TX descriptor for BE chipsets. As such,
with IPA Offload enabled, IPA needs the bank id information to do
offload WLAN TX.
From WLAN perspective, bank id is designed to be used on a per-vdev
role basis. E.g. STA vdev and SAP vdev have separate and different
bank profiles.
However from IPA perspective, bank id needs to be on a per TX ring
basis, because IPA GSI FW is not able to identify STA or SAP vdev
role on a per-packet basis.
Hence initialize last HOST owned bank id profile for IPA usage.
Change-Id: I0cf71b638f5999905069aff0551d8ebeb5477e17
CRs-Fixed: 3289558
This is a new FAST TX API which avoids various checks.
This API will be called when SFE tags a pkt as fast_forwarded
and vap's fast_tx flag is set.
avoid additional re-checks in the wifi TX function
CRs-Fixed: 3218650
Change-Id: Iba17ede59652a1ff2af553f57de21dc58946298e
Use WLAN_CONFIG_TX_DELAY to enable HW Tx delay for both
SAWF and non-SAWF stats.
Change-Id: I6db7d386c0e3654f53398dcba1db7c5568544b0c
CRs-Fixed: 3262425
- Add support to compute HW Tx completion delay on WKK
- Define arch op to calculate delay
Change-Id: I82567cc781e90fe01dc5a0edfffacd4cde73f652
CRs-Fixed: 3220911
1. Remove prints in per packet path
2. Add prefecth for skb shinfo
3. Avoid qdf_get_cpu() in DP tx
Change-Id: I86d196cc7865a2d5b3a5a6098f6f7d84397a60d0
CRs-Fixed: 3227568
Fetch the SAWF service_id and queue_id from per packet
metadata and populate on transmit descriptor.
Change-Id: Iba652c271b5b701e8af875805e59f0f224ace691
CRs-Fixed: 3194921
When TX completion is released from FW, dp_tx_notify_completion()
will not be invoked, then TX DCHP ACK will miss
hdd_softap_notify_tx_compl_cbk() which then
WMI_PEER_CRIT_PROTO_HINT_ENABLED with value 0 will not send to FW.
(1) move dp_tx_notify_completion() from dp_tx_comp_process_desc_list()
to dp_tx_comp_process_tx_status(), so that both TX completion release
source FW or TQM case will call it.
(2) clear TX notify flag for intra-bss forwarding BC/MC to avoid
unnecessary TX completion notify.
(3) Set ts.status for release source FW case otherwise it will be value
0 always.
Change-Id: I2bf9900a3d16ba162a83b061f0b96e7d2f79423a
CRs-Fixed: 3178423
This feature can be enabled runtime using sysfs interface.
Support is added to dump and clear the histogram stats.
The lower delay regions has to be more granular to indicate any
medium related issues for time sensitive XR applications.
Change-Id: I0a44a54d12d92ce016de349810cb2bedebaf9a58
CRs-Fixed: 2981006
Search flag addrX and addrY will be enabled for STA + TDLS case,
but currently TX bank profile is not updated which then STA still
use default TX bank profile - index based lookup search, TX might
fail.
Update bank profile with addrX and addrY search enabled.
Change-Id: I6af12d3707b59c5d4b4bba1fc5ec05a22bfcd984
CRs-Fixed: 3148759
Add support to change the tx_desc value to 65536. Some changes
to make the function argument as u32 type us made
Change-Id: I7cbde1b7ed4ab4e278c25c1ecfa94b7f673197f2
CRs-Fixed: 3130833
Currently HW TX queue HP value is updated for every TSO segment enqueue,
as a part of optimization update HP only for the last segment.
Change-Id: Ibe349a1e6f55932bf780e1f755f13841078a493f
CRs-Fixed: 3138142
Support TX completion and RX delay tracing by Ftrace for KIWI,
Add generic IP protocol packt tracing like ICMP packet.
Change-Id: Ie0c4b1764ce953fd2ed41fc5eea8aa28c8d427d9
CRs-Fixed: 3126080
Initialize txrx_ref_handle for whunt bypass,
Which is complaining use of uninitialized txrx_ref_handle,
as it is not able to detect that txrx_ref_handle is
populated from another API.
Change-Id: I0f69cf4c8442a5655559622a5825d7af35b9ae5e
CRs-Fixed: 3127788
