Enable CONFIG_HIF_CPU_CLEAR_AFFINITY flag to
change rx_err_ring irq cpu affinity.
Change-Id: I3d2475210ffd5ac6acef7e0418eef26cf92e1302
CRs-Fixed: 2950630
Device specific flags should be enabled from Device specific config
file itself. They don't need to be passed from upper level Makefiles.
Change-Id: Ic05cebb225cf63a6163f64cc72c02f38d2d25231
CRs-fixed: 2944594
Enable DP pending memory flushing by macro WLAN_DP_PENDING_MEM_FLUSH.
DP references of the peer will be removed once we receive PEER
unmap message from the firmware. If the firmware has failed to
send the peer unmap message (due to an assert in FW), then the
peer entries will remain the inactive peer list and will trigger
a explicit QDF_BUG() during driver unload.
Force clean the inactive peer/vdev list during driver unload in such
cases.
Change-Id: I2565cd4f1a4afea8536bcca86147d6fa028be554
CRs-Fixed: 2988733
With this change introduce featurization for dump in progress
and move implementation related to this feature to new files.
Change-Id: I4614aecde57a9c5ffec765f3afaa943c58956132
CRs-Fixed: 2979226
This reverts the change to do the memset of SW2TCL desc consumed by
HW to zero.
Change-Id: Ie56207cf483643f6e294df23f5445ca853a75d51
CRs-Fixed: 2984818
As hardware based on CONFIG_LITHIUM feature flags enable/disable in Kbuild
file were removed in commit "f06df4c", use CONFIG_<FEATURE_FLAG> from
qca6390_defconfig file to enable DP feature flags.
Change-Id: I8051fc789c70766bb4519c345e04c278864e2f1b
CRs-Fixed: 2984207
Enable flag FW_LOG_PARSING for Genoa so cmd like dl_loglevel
can be sent to firmware.
Change-Id: I6fcecb6198907e56c94e5d8211ac0ea0ecadb7fc
CRs-Fixed: 2983102
Currently we use hardware based feature flags in Kbuild file to
enable/disable certain feature flags. In case hardware changes, then we
would also need to edit Kbuild file to enable feature flags for the next
target. Instead, use CONFIG_<FEATURE_FLAG> from defconfig files to
enable DP feature flags. This will limit the changes for hardware update
to defconfig files only.
Change-Id: Icc8aa6ad51904946f9141a0f41728ed72b1f6d2f
CRs-Fixed: 2964342
This reverts commit I9e49ad5218f913f116cf4472f768f572740f14df
since ini based tx aggregation is configured based on firmware
capability.
Change-Id: I54541cd282eda6606e75fa347989624a0e0fef01
CRs-Fixed: 2963280
When FEATURE_HAL_DELAYED_REG_WRITE enabled, also enabled
SHADOW_WRITE_DELAY to avoid back to back shadow reg write.
Change-Id: I8d48496814e063ebd441db3520e3a5406c5db13e
CRs-Fixed: 2967202
Add debug log to print more details about the link vote id when
PCIe link suspend is not allowed.
Change-Id: I5069202436e0da37b8ae22f84e28ac06d35002b5
CRs-Fixed: 2964957
Enable the wlan IPA events for P2P GO/CLI mode for qca6390 to avoid RX
packets get dropped due to IPA interface context is not created.
Change-Id: I1e2c5e4085874280779d8d8d07efdb1f33e6d90b
CRs-Fixed: 2853271
Add support for QCA_NL80211_VENDOR_SUBCMD_GET_RADAR_HISTORY vendor
command. This command will return the current NOL list in driver
and the last Radar detection result in previous SAP active state
(includes CAC state).
Change-Id: I719630c39b89c1813ca05c4356dce627d72d82e2
CRs-Fixed: 2966501
Enable CONFIG_FEATURE_GPIO_CFG by default, which is exposing vendor
cmd interface for GPIO configuration.
Change-Id: Ib05025b26c03573920d5241150fab925beed425e
CRs-Fixed: 2953325
Do not reset CONFIG_IPA3 if target is QCA6390 to avoid mismatch between
Kbuild & qca6390_defconfig.
Change-Id: Iffe2976576a653a145a15cf798737569be116ec3
CRs-Fixed: 2946663
Enable SMMU S1 unmap config flag to do SMMU unmap of
IPA TX/RX doorbell registers as part of IPA cleanup.
Change-Id: I2e6e5312fb54841fde89db64071ded965c1c1bd1
CRs-Fixed: 2855099
Added flag for HTT HTC tx based completion. currently
packet are freed using htt htc misc list.
Change-Id: I2e7e4d59cadf30f4bb14eaefc045240d1ebc1aaa
CRs-Fixed: 2922547
For some of the stability issues triggered by H.W,
by the time host detects it most of the QDF history
is getting overwritten to avoid this increasing QDF
nbuf history. So that there will be less chance of
events getting overwritten.
Change-Id: Ia4bad1a175976af2e56126b56ae8c92a988e4289
CRs-Fixed: 2942868
Enable the history support to log Tx descriptors programmed
in Tx and completion HW rings.
Change-Id: I5ce308354714da78baa05500bc73e1a9ec91b958
CRs-Fixed: 2935363
Currently, module 'm' is converted to 'y' in QGKI when
compiling. In Waipio, GKI2 is present in which 'm'
is not being converted and hence IPA_OFFLOAD is not enabled.
To fix this, checking if CONFIG_IPA3 is either set to y or m
and then enabling CONFIG_IPA_OFFLOAD.
From Kernel 5.10, few IPA functions are depreciated for which
putting the depreciated functions under kernel check condition.
Change-Id: Iba3735692267130b76a8eaaaeeb53c263f8f0ddf
CRs-Fixed: 2921600
IPA_WDI3_TX_TWO_PIPES is added to enable two TX pipes
configuration for IPA WDI 3.0 interfaces.
Enable IPA_WDI3_TX_TWO_PIPES on sdxprairie platform.
Change-Id: I34fe0af56b169ebad9d7bb29b38838dd44503736
CRs-Fixed: 2750082
HST/Genoa/Rome support TX_AGGREGATION_SIZE, need enable it.
TX_AGGREGATION_SIZE is introduced in
change: I9e49ad5218f913f116cf4472f768f572740f14df .
Change-Id: I63fc729f3daf2b1757c5eb2fb839ed22ebce359a
CRs-Fixed: 2926281
With the changes introduced in
Change-Id: I91e87ffa32d77e2bab15fca09514cdefb1075c71
Change-Id: Ie6579d1ed34de2c183f9ce2d411a02d6c8137da5
wlan chipset's device id won't be available in
pld_pcie_id_table unless a chip specific macro is defined;
and cnss2 will do strict device id matching after wlan
driver registers to it.
This has been a problem for rome on auto platforms because
there has been no chip specific macro defined in its
defconfig file(qca6174_defconfig).
Add rome specific macro into qca6174_defconfig to make sure
wlan driver exports the correct device id when registering
to cnss2 driver on msm-5.4, so cnss2 device id check can
be passed and wlan driver init doesn't fail.
Change-Id: Idd7a86380613b9f624cfa6e4574d40065e85a221
CRs-Fixed: 2907268
It enabled two pipes for IPA DBS case on SDX65, and froce wake
doesn't support this case. So disable it on this platform.
Change-Id: Ie8a23f11a5cd089b205c5b6ec27c39a9da9ddad9
CRs-Fixed: 2901043
HSP doesn't support TX_AGGREGATION_SIZE ini, need disable it to avoid
confusing.
Change-Id: I9e49ad5218f913f116cf4472f768f572740f14df
CRs-Fixed: 2918796
The feature HIF_DETECTION_LATENCY_ENABLE is not applicable for all targets.
To avoid issues, enable this feature based on target.
Change-Id: Ia7bab02710ee2bbb9f487571ec98992ac338961f
CRs-Fixed: 2915968
Enable DUMP_REO_QUEUE_INFO_IN_DDR to send cache flush cmd
to REO using cmd: iwpriv wlan0 txrx_stats 34 0
Cache flush cmd will invalidate the h/w cache and ensure
that h/w writes to DDR.
In the cmd callback, the reo status tlvs are processed
and the vaddr of the reo queue desc is used to read the
queue information from DDR and dump it in the host driver logs.
Change-Id: I4521b777d13c490ac687f9ff673182262bc52f62
CRs-Fixed: 2899824
Enable LPSS flag on SDX65 platform to make suspend/resume possible to
work in some special scenario like STA/SAP interface idle exist.
Change-Id: I703401d27d3437d0006ad560c00154b0dc589091
CRs-Fixed: 2873228
