cfg80211 scan list is not empty during the
scan priv deinit/list destroy because of that
qdf mem module triggered an assert.
Clear the cfg80211 scan list before
destroying the list.
Change-Id: I391d3b91869d085ec6ff405b7ddca37d7002e5ca
CRs-Fixed: 2136702
Change "qcacmn: Rename enum tQDF_ADAPTER_MODE" (qca-wifi-host-cmn
Change-Id I20f1b6d1a0ab4b8fe6a85cefdff96a49e2f4652c) renamed enum
tQDF_ADAPTER_MODE to QDF_OPMODE. Update all references to use the
new name.
Change-Id: Ic6f663dac11a100f168b2626c7c0fbcaccbfca4f
CRs-Fixed: 2141061
Add following vendor commands and their vendor attributes for
spectral scan.
1) QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CONFIG
Get current values of spectral parameters.
2) QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_DIAG_STATS
Get stats for spectral scan debug.
3) QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CAP_INFO
Get the spectral hardware capability.
4) QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_STATUS
Get the current status of spectral scan.
CRs-Fixed: 2126313
Change-Id: Id1e9b030f85de166696835fadd36d7856a89625d
Add vendor attribute for data used by
VENDOR_SUBCMD_SET_WIFI_CONFIGURATION and
VENDOR_SUBCMD_GET_WIFI_CONFIGURATION subcommands.
Change-Id: If64da28c040868d5b42af202c647251db1a684c0
CRs-Fixed: 2137081
TDLS set state cmd to firmware is going out of sequence, if STA
is disconnected, when concurrent TDLS connections are active.
This out of sequence causes crash in the firmware.
Fix the out of sequence issue, by grouping all the TDLS delete
peer commands into one single command.
Change-Id: Idd315d544c46bcf063881bff5be70cb5d9ad0ea2
CRs-Fixed: 2123838
Add cmn support for the following:
- Update ERP info in RSO Start
- Update HLP info in a new command WMI_PDEV_UPDATE_FILS_HLP_PKT_CMDID
- Set/Delete PMK cache info with WMI_PDEV_UPDATE_PMK_CACHE_CMDID
- Process FILS TLV in Roam Synch Indication and update the FILS info
[seq number,PMK, KEK, realm] to Supplicant.
Change-Id: I239bf5d6c4455d39181e335dbf73bcade16aee8e
CRs-Fixed: 2089128
qcacld-2.0 to qca-wifi-host-cmn propagation
If no SSID are passed to NL80211_CMD_START_SCHED_SCAN cmd,
interface spec requires that an active scan is not needed.
Therefore a passive scan is now requested by cfg80211_sched_scan_request
for this case.
Change-Id: I1b1b9232ffb9d8d5c0bc9a1d75145d39c9fe9e6b
CRs-Fixed: 902092
Commit fb9d5acfed and 645749571d introduce an API to deinit scan
runtime suspend lock in order to fix a memory leak issue. However,
it breaks SSR because scan lock init and deinit are not matching
during SSR which results double free happens in the rmmod after
SSR. Add the API to init scan runtime suspend lock so that it can
be added in the correct place during SSR.
Change-Id: Ied85b16b199fdbf43fef4c966bed56c9f7bb0e86
CRs-fixed: 2120661
Event indicating to the user space that the driver has detected an
internal failure. The driver is expected to recover from such a failure
automatically, e.g., by resetting the device.
This event carries the information indicating the reason that triggered
this detection.
Change-Id: Ia13e6f102e5e18ec4864ed258728369d51a77ff4
CRs-fixed: 2120886
In order to support multiple nla_parse function signatures across
different kernel versions, a new wlan_cfg80211_nla_parse wrapper was
introduced. However, it is easy for propagations or new code to
reintroduce nla_parse. Redefine nla_parse to throw an error, to prevent
the function from being reintroduced into the code base.
Change-Id: I3015d1b3f25a1469632401899555a6260ba2dfc1
CRs-Fixed: 2116051
Add 11ax channel property flags for use with external ACS. Use the
remaining available bits in qca_wlan_vendor_channel_prop_flags for the
first few 11ax flags. Then add qca_wlan_vendor_channel_prop_flags_2 as
a continuation of qca_wlan_vendor_channel_prop_flags and add the
remaining 11ax flags there. qca_wlan_vendor_channel_prop_flags_ext is
not used since it is currently not intended for holding such
information. Rather it is meant for holding additional control
information related to features such as DFS, CSA, etc.
CRs-Fixed: 2115743
Change-Id: I5294f9a8649f79f7012cd790119be773b40f049d
To support the CLD implementation to change BmissFinalBcnt dynamically
(Change-Id: Ie3c3895d48248d349400e755f07edc807e335b44), add new vendor
sub-command id QCA_WLAN_VENDOR_ATTR_CONFIG_TOTAL_BMISS_CNT as 52.
Change-Id: I8df8faab1b49d8fc30a1b775d5f5fec5139ca25d
CRs-Fixed: 2084255
Add support for handling vendor sub command
QCA_NL80211_VENDOR_SUBCMD_ACTIVE_TOS and its attributes.
CRs-Fixed: 2100587
Change-Id: I8734deb4eb2e2481329131d47b747d266463350a
On framework initiated scan, ies are not sent in
scan request from upper layer and default scan ies are
not sent as part of scan request sent to firmware. This
results in not including oce ie in probe requests for
framework initated scans
Fix is to copy default ies to ie field in scan request
sent to firmware.
Change-Id: I895563bafc2a2b6e483d08cb28ee44ad34f5af70
CRs-Fixed: 2087124
Versions 4.11+ of the Linux kernel removed '__' from the beginning of
ieee80211_get_channel(). Migrate all calls from __ieee80211_get_channel
to ieee80211_get_channel instead.
Change-Id: I0548259beb59f0a3cb27fe6fee1dd9626cc624cc
CRs-Fixed: 2098795
The 4.12 Linux kernel adds a request id parameter to
cfg80211_sched_scan_results(). Add conditional compilation to provide
the correct parameters based on the kernel version.
Change-Id: I2008895e390af88af0b22df6bfd7ef753d25b419
CRs-Fixed: 2092073
The Linux kernel version 4.12 introduced an API change to nla_parse().
Add conditional compilation to call nla_parse with the correct
parameters based on the version of the linux kernel being compiled
against.
Change-Id: Ie904d217a42a2396f8245251a9c90a15dac2c0c9
CRs-Fixed: 2093354
qcacld-2.0 to qcacmn propagation
Add changes to support PNO scan in connected state to find better Ap's
based on rssi threshold, band and rssi preference.
Change-Id: I0744297cc5269f0fe37613247c911102e293d8e9
CRs-Fixed: 2000342
This commit defines an attribute
QCA_WLAN_VENDOR_ATTR_CONFIG_LISTEN_INTERVAL which allows the currently
used listen interval to be updated using
QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION. This update applies
only during the association and is done without updating the AP about
the change.
Change-Id: Ie7b2016c1d3d06c7fcb5099b53e3fc0a159cc246
CRs-Fixed: 2048443
This request ID was wrongly referred from the REQUEST_ID in
enum qca_wlan_vendor_attr_gscan_config_params which is mapped to
QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_LIST_PARAM_NUM in PNO Config.
Hence define a different attribute to represent the request ID
for the PNO Config.
CRs-Fixed: 2095917
Change-Id: I76289468fe926f5bd157c4d37b45bbf5a0ebdfb7
qcacld-2.0 to qcacmn propagation
Add support to include only selective IEs in probe requests in
order to improve user's privacy.
Change-Id: I59cf4181f60f5b4cd87a32fbcf29160d87ca59c8
CRs-Fixed: 1105495
When an invalid mac address(all zeros 00:00:00:00:00:00) sent
to the host via user configuration, it triggers the crash in
the system.
Add checks to reject the invalid mac address configuration
in TDLS.
Change-Id: I340f581e7011f78faf5f58c10f7b6eec15ea2940
CRs-Fixed: 2068026
Runtime PM lock init API right now returns pointer to a context
but this would cause confusion to the caller if feature is not
defined and dummy function return NULL as caller can't find real
failure versus dummy function returning because feature not being
enabled.
Fix declaring a data structure in QDF layer that caller can use
but it hides the internal details of HIF implementation for
Runtime PM locks.
CRs-fixed: 1116509
Change-Id: I4dcba604e803faa0e14fac6403610391895e382e
qcacld-2.0 to qcacmn propagation
Randomize probe request's source address and sequence number to
improve user's privacy.
Change-Id: I265f15476f1a23a268f159a44b6a3e4243fb9068
CRs-Fixed: 1105081
When TDLS disabled at the build level, it triggers
build failures in some of the projects, which does
not support TDLS feature.
Restructure the TDLS function to avoid build
failures, when TDLS is not enabled.
Change-Id: I3b63546f22d0187fb42d400fd7e15ff7a3d64653
CRs-Fixed: 2056022
Vendor features are used to indicate OCE support
from driver to user space which are set based on ini
params for STA and SAP.
Change-Id: I7ef572443c8a7ed313917e4dfab5f4fab73fe245
CRs-Fixed: 2031980
There were some corner cases reported in which NDIs are getting
created with same name. Providing fix for the same.
Change-Id: I84ea80580faa44809e257d3b17645808637b5d51
CRs-Fixed: 2072509
Enable support for multiple nan data interfaces. The usespace
may need to create multiple NDIs depending on whether it
requires IP isolation or not.
Change-Id: I4391f2efdc6bdede52a73915531d39dd7798c39d
CRs-Fixed: 2072501
qcacld-2.0 to qcacld-3.0 propagation
Add QCA_WLAN_VENDOR_ATTR_GET_STATION_REMOTE sub command for peer
station of SoftAP information stats feature, and add related
attributions of this command.
Change-Id: I516d459be2e6556a7e33d285c3ffeacc1ab0f9a5
CRs-Fixed: 2075888
The ndp channel config has no meaning if ndp channel itself
is optional. Host will send ndp channel config as "optional"
to FW if it is missing in the ndp command.
Change-Id: I59e245f3fb05ae35aa185fba7bad09608f5334c8
CRs-Fixed: 2072502
Driver truncated the transaction id to 8-bits from 16-bit
value causing the descrepancy in transaction id exchange
during NDI create.
Change-Id: I502f422620411c39bd0e75f06e9b7200bfea24ae
CRs-Fixed: 2072511
Service layer was not allowed to delete NDI if there are active
NDP sessions (peers). Service layer is expected to delete the
active NDP sessions before issuing NDI delete. However, that
is not guaranteed to happen. Hence allowing internal cleanup
to happen by allowing the command to firmware.
Change-Id: Iab9bc3bca431475792c164d16cdd18be2f346188
CRs-Fixed: 2072505
Add Passphrase and Service Name to NDP initiator request and NDP
responder request.
Change-Id: I6a189747760a15393fcbac9dc382847fef789ab1
CRs-Fixed: 2072498
Add host support for detecting SOC power collapse failures in FW and
communicating the same to framework.
Change-Id: Icee39c896802c4d7136e0b8ef442a33feeb4799c
CRs-Fixed: 2016580
Remove vdev/peer locks from trivial API's. This follows the changes from
which the lock requirement from few simple APIs are removed.
Change-Id: I9972d51dfd1a42bdedbfd0fd4e67af03d030a1f5
CRs-Fixed: 2060880
