Updating correct QOS values for Camera CDM port
based on HW recommendation.
CRs-Fixed: 3546181
Change-Id: I5f1721e03e6e6e6ae7871df2db4f294f0bfd5d28
Signed-off-by: Alok Chauhan <quic_alokc@quicinc.com>
(cherry picked from commit 4fefd334d62305a928349d336df6e3c1492c88b9)
When csid init hw failure is seen due to any reason
dont call disable hw. As part of init hw failure
denint hw gets called and disable hw is taken care.
In case if disable hw is called during init hw,
it disables soc resources and when disable hw
gets called again during deinit hw, will land
into NOC errors while accessing registers with soc
resources disabled.
CRs-Fixed: 3577353
Change-Id: I65e05f748684c5b38852bd52ed51799918cb427f
Signed-off-by: Shravya Samala <quic_shravyas@quicinc.com>
CRM pd tbl dev mask need to be updated on mode switch in Auto SHDR,
so that the mode switch request and subsequent requests or slot should
be in ready state if request is submitted by all expected device
in a link. Also enabled error bit related to shdr mode switch in tfe.
Query dev info from CRM to ISP again on activate link call to know if
usecase is SHDR and to identify master and slave context.
CRs-Fixed: 3555900
Change-Id: Ie3ce093a453cda4bb5a9d8ddd31b4c8d2b2a69ed
Signed-off-by: Ayush Kumar <quic_ayushkr@quicinc.com>
This change fixes issues involving out-of-bounds, uninitialized access and
NULL pointer dereference.
Out-of-bounds access issue was present in cam_tfe_mgr_get_hw_caps_v2 as
address of pointer was passed to copy_to_user instead of the pointer.
Uninitialized data access with query_isp as it was not initialized before
being passed to copy_to_user in cam_tfe_mgr_get_hw_caps.
NULL pointer dereference in cam_tfe_process_cmd as in case of invalid
argument there was an attempt to print the TFE core index.
CRs-Fixed: 3555879
Change-Id: Ib706eea896a04e1d4e9612e4e763b674c4256e77
Signed-off-by: Abhilash Kumar <quic_krabhi@quicinc.com>
For PDAF Clients, userspace can allocate a bigger buffer than
the WM Client configuration, in this case stride of the Client
should be updated properly to get proper data from WM Client.
CRs-Fixed: 3555900
Change-Id: Ie2b369b59a14f19100932d912167537cab266e0d
Signed-off-by: Ayush Kumar <quic_ayushkr@quicinc.com>
For legacy SHDR, report bubble even if request is applied
after SOF so that both master and slave context goes to
bubble state in legacy SHDR or SHDR without SFE target.
CRs-Fixed: 3555900
Change-Id: I64e38d14ba3472fa1d298882d6b09a2f14e0d576
Signed-off-by: Ayush Kumar <quic_ayushkr@quicinc.com>
In Type3 usecase, PDAF ports can come as part of IPP config. This will
cause failure during out pdaf acquire resources.
Handle PDAF ports acquire during this usecase as pdlib resource.
CRs-Fixed: 3546181
Change-Id: I9d42e499c87961f5ceec995245e6b599d6015de7
Signed-off-by: Alok Chauhan <quic_alokc@quicinc.com>
This chages is to support blob to update TFE WM dimensions.
This is required as 3A lib allocates max buffer for pdaf ports
but per request dimension can differ from buffer dimension.
CRs-Fixed: 3546181
Change-Id: I98bffa9ef00a7fa2bb543cb0c89f7920ed6780c5
Signed-off-by: Ayush Kumar <quic_ayushkr@quicinc.com>
This change is added to support buffer alignment for TFE
WM in x and y axis. This change is required in SHDR usecase to
align short exposure frame with long exposure frame.
CRs-Fixed: 3538642
Change-Id: I9a3d35d0884bfbd6f62034b207e5784fdf2f7430
Signed-off-by: Ayush Kumar <quic_ayushkr@quicinc.com>
Handle internal recovery in case of csid and bus overflow.
Handle frame size error detection for pixel and line count
mismatch as fatal errors.
Fixed csid side error reproting to hw_mgr layer.
CRs-Fixed: 3532076
Change-Id: Id4f572caf6774797396d70d7a20a4f54fc1b9ea9
Signed-off-by: Pranav Sanwal <quic_psanwal@quicinc.com>
This commit adds support to disable acquired TFE WM clients if the client
is not configured.
CRs-Fixed: 3531808
Change-Id: Ie3be423dfd2ab35031677563d66fd811090148fe
Signed-off-by: Ayush Kumar <quic_ayushkr@quicinc.com>
This change add support to program dual tfe configurations in
SHDR to create sync between two TFEs. This change is required
if MUP bit is used in SHDR mode.
CRs-Fixed: 3508184
Change-Id: I270f7fd8e3cac1f1e50c5f16e7cba2c5e9c2b74f
Signed-off-by: Ayush Kumar <quic_ayushkr@quicinc.com>
This change is to add support for error inducement in TFE HW.
CRs-Fixed: 3426117
Change-Id: I19a5e095bc84fa88c308640a1d490162698bb45f
Signed-off-by: Ayush Kumar <quic_ayushkr@quicinc.com>
In overlap SHDR, epoch irq from TFE need to configure in such
a way that request should be apply at epoch of shorter exposure frame
before start of the next frame of long exposure to make sure that
new settings should apply properly in time.
CRs-Fixed: 3396382
Change-Id: I1ddc3ce95c6d404a3f76a27cc58083e11b03bace
Signed-off-by: Ayush Kumar <quic_ayushkr@quicinc.com>
This change add support for activate and deactivate ISP device in the
link when dual trigger mode in the link is set.
CRs-Fixed: 3374385
Change-Id: Ib6d25ab295d613fa5cd3edf1780362476920d74d
Signed-off-by: Ayush Kumar <quic_ayushkr@quicinc.com>
Add support to skip HW operations (power/CCI) for
sensor nodes with "hw-no-ops" property. These nodes are
dummy entries since CSID reads data from a different sensor.
CRs-Fixed: 3150840
Change-Id: I6ceb3f9d2ea4f16abb9d5d2a6b89d5cb1d95c614
Signed-off-by: Shravan Nevatia <quic_snevatia@quicinc.com>
(cherry picked from commit 3deec40a9a58296f6f43d3cfe15b092e5a16c28b)
Add validation checks in CRE, ICP and TFE drivers
to avoid OOB and null ptr access issues.
CRs-Fixed: 3248380
Change-Id: Ic2c6bd41e34605a3291e6f50fe0fe94a0ab30523
Signed-off-by: Nirmal Abraham <quic_c_nabrah@quicinc.com>
(cherry picked from commit a63bcb668392e1271ab0d2f53a54736a54325828)
While we lookahead and merge the continuous reg settings to
burst, the packed setting len with uint8 data type may happen
overflow if the continuous reg setting count is larger than 255,
then some reg settings missed and lead to some sensor issues,
so modify the data type of len to avoid it.
CRs-Fixed: 3678429
Change-Id: I51a153d2340b84dd874ecd7bef6b3df1356611b0
Signed-off-by: chengxue <quic_chengxue@quicinc.com>
(cherry picked from commit aadcb5e66d37f556c570621e3b15e834601f074b)
When CCI drains its payload cmds in QUEUE because
of CPU scheduling delays from SW Driver side then
next successive transaction will endup in NACK ERROR.
To Fix this issue, Updating payload cmds to CCI QUEUE
is moved to Threaded irq so that Scheduling delays can
be minimized and avoid NACK Error.
CRs-Fixed: 3562709
Change-Id: I577a6531d692a4f202651e2dd5d4cf0684259b75
Signed-off-by: Lokesh Kumar Aakulu <quic_lkumar@quicinc.com>
(cherry picked from commit bcdafbc3c3afcbed75c2c469f26d8c483d0430d1)
This change limit the resolution for the single camera based on fuse.
Acquire will fail in case width is greater than the supported width.
CRs-Fixed: 3679491
Change-Id: I4f3e8dfdbe80aee994ca66f12bbbcdc7cda77676
Signed-off-by: Dharmender Sharma <quic_dharshar@quicinc.com>
Introduce Threshold IRQ and compose dynamically
allocated buffer with CCI BURST WRITE Commands
and finally write to the CCI HW register and
manage Threshold Interrupts in optimized way. So,
that SW Driver latencies will not affect the I2C
BURST WRITE functionality.
CRs-Fixed: 3562709
Change-Id: I5749ba3b61e28d8f2c1075f46f470f5a9c5bd6b5
Signed-off-by: Lokesh Kumar Aakulu <quic_lkumar@quicinc.com>
(cherry picked from commit 1e4f481db9076c766b7300bb65364a13a61247c1)
Add changes for cpas for raveline camera .
Create target specific header files for raveline.
CRs-Fixed: 3318758
Change-Id: Ib1bd54975a97bc4b09293cf8a82a1c3bbbeecb31
Signed-off-by: Pranav Sanwal <quic_psanwal@quicinc.com>
(cherry picked from commit fc03d26be204900d7e19054915b52fbd3353444f)
Updates board list of supported msm-mmrm boards to include volcono.
CRs-Fixed: 3671077
Signed-off-by: Alok Chauhan <quic_alokc@quicinc.com>
Change-Id: Ia5c26af59e029506d961052a4a4f9f8b3f0fef18
