Firmware advertises service capability bit
WMI_SERVICE_PEER_DELETE_NO_PEER_FLUSH_TIDS_CMD
when peer delete command takes care of flush
all tids functionality.
If this service bit is set advertised by FW
then host does not need to send the flush tid
command before sending the peer delete command.
Change-Id: Ic6632772eeebc7f1494f1dd5e9d533b2bc22e533
CRs-Fixed: 2609962
Add a QCA vendor sub command QCA_NL80211_VENDOR_SUBCMD_THERMAL_CMD
to implement thermal mitigation. Different operations required to
implement this feature can be specified in
QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_VALUE,
QCA_WLAN_VENDOR_ATTR_THERMAL_LEVEL.
Userspace requests the driver to enable/disable thermal mitigation
based on the thermal state of the device and wlan host performs the
required appropriate action. wlan host driver maps the thermal level
provided from userspace via vendor command to corresponding duty
cycle off percent value and duty cycle value,send
WMI_THERM_THROT_SET_CONF_CMDID cmd to FW.
Make changes to perform vendor command handling, mapping thermal level
to duty cycle value and communicating the thermal information to FW.
Change-Id: Idc9c87dcb4275122980713471544baa23e705a53
CRs-Fixed: 2610403
In the change I0165f3bd4638280b45ad54391319806fba62e2fe, driver tries to
fetch the PDEV in init_deinit_handler before it is created in MCC. This
can cause driver init to fail.
Move the fetching of the PDEV to after the PDEV is created.
Change-Id: I028ac14da333084ce68f03f3d3771cdb6298933b
CRs-Fixed: 2611379
Replace QCA_WIFI_QCA8074_VP with CONFIG_WIFI_EMULATION_WIFI_3_0
since VP platform is not being used anymore.
Most of the parameters present inside QCA_WIFI_QCA8074_VP are related
to emulation timeouts. Hence replacing it with a more meaningful flag.
Change-Id: I22a0e5803e765333947f1613b376dcc6bd25b5af
Update value of new ini for separate iface support for NAN
"nan_separate_iface_support" to fw through a command
WMI_INIT_CMDID.
Change-Id: I55830e0d16d86ee5a0bfa7d3e44c6309c0d3d54b
CRs-Fixed: 2612010
Currently, the driver rejects the roam stats event if any of the
roam trigger or roam scan or roam results tlv is not present.
Now the firmware will send neighbor report immediately after the
neighbor report response is received from AP instead of buffering
it as done before.
So do not parse the roam trigger, roam scan, roam result tlv if
the tlv is not present. Add new flag in the tlv parsing structure
if the TLV is not present.
Change-Id: I366d8853f7f45dcdac6d4aa5c3a8a12a8b602a4f
CRs-Fixed: 2610377
Some areas in other components are directly calling the kernel api
functions to perform runtime PM no idle operations. Create a new HIF
function to handle runtime PM no idle operations.
Change-Id: I8328bc74ccc8e8acd35d7d73ec4cc21094b8f5b2
CRs-Fixed: 2607721
In the function that processes rxdma err frames add null check
before calling vdev callback function. If its valid then deliver
the skb to stack or free the skb.
Change-Id: I7c481eb8f702d9109c4a9f79db7e050ece6c3689
CRs-Fixed: 2607658
During scan request from framework wlan_cfg80211_scan gets
invoked. If the cfg80211_scan_request parameter has number
of ssids set to zero then driver will set the scan mode to
passive mode. This will result in fw doing passive scan
instead of active scan. Probe request will not be sent to
discover the peer. This will sometimes result in failure
to discover P2P GO peer.
Set the scan mode to active mode in scan request message to FW.
Change-Id: Ic28757cb69ec62e554ac8baccce17cac504a0bef
CRs-Fixed: 2606614
As part of new requirement WLAN subsystem needs to perform thermal
mitigation action as per the thermal state of the device. The
wifi hal sends vendor command QCA_NL80211_VENDOR_SUBCMD_THERMAL_CMD
with the thermal level parameter and wlan host performs the required
appropriate action. wlan host driver maps the thermal level to
corresponding duty cycle off percent value and duty cycle value,
send WMI_THERM_THROT_SET_CONF_CMDID cmd to FW.
Make changes to perform vendor command handling, mapping thermal level
to duty cycle value and communicating the thermal information to FW.
Change-Id: I5b455ae6483f3d5bf2fe708f40c32a55eb8b9bdb
CRs-Fixed: 2610404
AST entry delete logic has some conditional checks making code with respect
to HTT V1 and V2 messages making it tough to follow.
Change-Id: I229324446134b32021a956fb689e4726256fcc28
Add a framework to configure varying buffer size for both data and monitor
buffers.
For example, with this framework, the user can configure 2K SKB for Data
buffers, monitor status rings, monitor descriptor rings, monitor
destination rings and 4K SKB for monitor buffers through compile time.
Change-Id: I212d04ff6907e71e9c80b69834aa07ecc6db4d2e
CRs-Fixed: 2604646
Lithium HW can parse each MSDU when packets are enqueued to transmit
classifier and each MSDU can get enqueued to different MSDU-Queue.
By default, there are 2 queues per TID – UDP and NON-UDP. Based on
the flow parsing, packets will be queued to either of them.
Enterprise customers uses RAW mode frames which transmit classifier
would not be able to identify L4 protocol for UDP or NON-UDP queue
for encrypted frames.
Customer can also have different application based packets which needs
to be enqueued to differently prioritized queues. They can choose to
tag each MSDU based on application DPI and derive the flow priority
as below –
• UDP
• NON-UDP
• HI-PRIO
• LOW-PRIO
Customer needs API support from host which will provide an ast-index
based on a particular flow id given peer mac address. Based on the mac
address, host will find the associated peer and return the ast_index &
cache set number corresponding to the flow id from peer flow based ast
entry table. Customer will then program this ast-index and ast override
in transmit classifier CMD ring to enqueue MSDU to a specific
flow-queuein TQM.
Host API:
Input parameter – uint8_t *peer mac address, uint8_t flow id
Output – uint16_t ast_index
Change-Id: I79557c31532514ad5ec0c1848827a3e5cd91cdf2
Enable timer and batch count threshold interrupt for CE1, CE2
and CE5 rings through INI and retrieve the parameters through
psoc handle.
Change-Id: Ifa6cd768ed41ded46cae652ad7c910ffa62f2310
CRs-Fixed: 2593531
Add API to set/get monitor vdev count in pdev object.
Also update the max peer count in pdev and psoc when FW allocated peer
count is different than host requested.
Number of vdevs and beacon tx offload max vdevs in wlan_res_cfg are updated
in target_if_update_pdev_tgt_info().
Also, add radio related parameters to get number of vdevs and peers per
psoc and pdev.
Change-Id: I0165f3bd4638280b45ad54391319806fba62e2fe
CRs-Fixed: 2600984
fix the issue for block ack/ack for tx capture mode.
1. Hanndle BAR frame.
2. set rate for ACK frame.
3. Check block ack session and use block ack if block
ack session is established.
4. no ACK for broadcast probe request.
5. not ack if the ack policy is set to no ack in qos control.
Change-Id: I4f22c1c976334978fb971b42319fb3a6e43a00c2
Add support to send protocol data packet info via diag log
command to userspace at tx entry point, on receiving tx
completion indication and in rx path, before delivering the
packet to network stack.
Change-Id: I6a95a16b7ebedf505ecb501107b1bbb89b16b67d
CRs-Fixed: 2595799
long length msdu is received and looks this msdu is spread across
multiple nbufs, there is no corresbonding logic for this case.
qdf_set_pkt_len will invoke pskb_expand_head to renew skb->head
buffer, but the rx_tlv_hdr is still pointed to original skb->data
buffer, invalid accessing will happen.
As a WAR, drop this msdu related nbufs after dp_rx_sg_create is done.
Change-Id: Iceb09fd04e4d768325018a8ddd4261ab4f75991a
CRs-Fixed: 2597927
Failed to read RNR entries from the RNR list
while issuing the scan.
Arguments passed to access the next node from RNR list
is not initalized due to which RNR entry accessing failed.
Change-Id: If5d1f4cace8e393e93b82ac3881b9627bde5f9e1
CRs-Fixed: 2605732
Add the changes in utils and wlan configuration
layer for supporting the newly added IPCI bus type
for Moselle.
CRs-Fixed: 2597342
Change-Id: I4484d6e774e9f94a322b8dee4ae7ff4460ed2634
APL11 and APL19 reg domains are mapped to FCC radar detection
pattern which enables the channels 170, 171, 172 and 174
but according latest regulatory database version 30
APL11 and APL19 does not support channels 170, 171, 172 and 174.
Channels 170, 171, 172 and 174 are DSRC channels and should
not be enabled by default.
To address above issue make channels 170, 171, 172 and 174
valid only for DSRC case otherwise make these channels
invalid.
Change-Id: I5fe2c7a5db44f1cf8d6cb6317396c4527482137c
CRs-Fixed: 2593174
Crash scenario:
(1) frag data A is dropped and related RX desc A is replenished
and reused, but pdev->free_list_tail is still pointed to RX desc A.
(2) frag data B/C is coming, defrag fails then pdev->free_list_head
will point to B-->C RX desc, but pdev->free_list_tail still point to A.
(3) for defrag failing case, host only will replenish 1 RX buffer for
current case, RX desc B is replenished, while C will be free back to
RX desc pool.
(4) dp_rx_add_desc_list_to_free_list will set RX desc A-->next =
free_list, free_list point to C insted.
(5) when step (1) RX desc A replenished buffer indicated to host by
REO2Dst ring, RX desc A -->nbuf actually is pointed to another RX
desc, invalid skb accessing will happen.
Solution:
a. reset tail pointer in dp_rx_add_desc_list_to_free_list at last.
b. reset tail pointer same as head in dp_rx_add_to_free_desc_list
if head->next is NULL.
c. set correct rx_bufs number for replenish when dp_rx_defrag fails.
Change-Id: Ib297baea3605a09dd7d85d1f5ceb95db48a2e1f1
CRs-Fixed: 2603676
Adds support to include qdf as part of single module.
This is needed for WHUNT testing where we need to have
single module, one inserted as AP and one as STA.
Change-Id: I8c2aef4cc18391e92f537e2ce791bd5b58b6e764
