Driver multiplies the supplicant requested roc duration by either
6 or 10 times and then requests FW roc of that much duration.
This is because to extend the roc after rx frame is received.
Currently, host is initializing the internal roc timer for the
duration same as requested to FW.
In such case we cannot extend the roc as currently there is only check
for timer running, but not the remaining time. And FW may give
scan completion event immediately after sending the tx frame.
Change-Id: Ib864949d232c31422f83d78bd6b318cadbf13366
CRs-Fixed: 2397924
Legacy WNI CFG items are refactored into new CFG implementation.
PMO uses a wma callback which uses cfg_get API to get listen
interval. Listen interval is now part of the MLME component's
private object. Define API's to get this value and use it instead
of the callbacks.
Remove WMA callback implementation and use new API that gets
listen interval from MLME component.
Change-Id: I797001ea14cc654f9daee3ce297e1ad0c0a08f2a
CRs-Fixed: 2386725
Currently the TDLS component code is unconditionally built which will
bloat images where TDLS is not required. Fix this by only building the
TDLS component when the TDLS feature is enabled.
Change-Id: I7496b8f07ed495b00e62fc3cf50a96e1829d9341
CRs-Fixed: 2399966
Add ini to support partial and full bandwifth feature of UL MU-MIMO.
0-> no support
1-> partial bandwidth
2-> full and partial bandwidth
Change-Id: I94b2c8e525795a32a923e75f0650742f806dfcd5
CRs-Fixed: 2397536
By design, when APF is supported by target, RA filtering need
not be configured. Legacy code handled this by passing INI value
of RA rate limit value to WMA and intersecting it with APF
enabled flag. Change Iabb75b46fce64b2c4a7a303848d7cb6b4714253b
replaced this implementation by a single check in PMO. So remove
the WMA legacy code since it has no purpose now. Also remove
unused PMO prototypes pmo_update_ra_limit and
pmo_update_target_service.
Cleaunp the WMA code that intersects RA rate limit and APF
variables.
Change-Id: I870a1271a627d47242000f5e04068e628f567216
CRs-Fixed: 2379745
Currently the driver has the default ini of
PCL policy to select SAP channel as optional,
which leads to ACS on a band where the STA is
present, hence a waste of time, because SAP anyways
has to move to STA channel.
Fix is to make the PCL mandatory, so that the driver
doesn't waste time in ACS, and returns the best channel
of STA, to turn on hotspot fast.
Change-Id: Id9d3dd60e93c9df9e3c65ad8583d8d90058094f8
CRs-Fixed: 2395581
Session_id in __wlan_ipa_wlan_evt is used as an index
to access the array ipa_ctx->vdev_to_iface[].
Add sanity check for session_id to avoid invalid access.
Change-Id: Ie6079924c4772c3fa892b4537120db136a899885
CRs-Fixed: 2395162
As part of the TDLS feature, structs sta_uapsd_trig_params and
sta_uapsd_params were replicated from qcacmn wmi_unified_param.h to
qcacld-3.0 wlan_tdls_public_structs.h, and conditional compilation
based upon CONVERGED_TDLS_ENABLE was used to determine which structs
are actually used by a build. Since these structs are not specific to
TDLS, remove the duplicates and exclusive use the structs from qcacmn
wmi_unified_param.h.
This is co-dependent upon Ida0f2b6f131ff2dce7217b881ffadecfd685f563
("qcacmn: Remove TDLS featurization from UAPSD trigger structs").
Change-Id: I37b2d80a4710aced158dcf2ea973d15801a7cecc
CRs-Fixed: 2395823
Enumeration TDLS_PEER_STATE_CONNCTED contains a spelling error, so
rename it to TDLS_PEER_STATE_CONNECTED.
Change-Id: Ifa0ff667a407cdad3e240aec6c188f20336a166a
CRs-Fixed: 2397350
Before updating pcl_list_org & weight_list_org array,
memzero these arrays to length of array passed by caller.
CRs-Fixed: 2395140
Change-Id: I856ceafd8f4d86eeee3401227f5d6f48615098f5
Move the contents of hdd_dsc to the new files added in osif/sync as part
of Ica94d32028d10d344294d6cc12d91a06efe1ab6c.
Change-Id: I556e9d2833edd2bd26266496b6000347649c5fbe
CRs-Fixed: 2396512
Refactor the below two ini items to new converged cfg/ini
infrastructure:
"gEnableChangeChannelBandWidth"
"extscan_adaptive_dwell_mode"
"extscan_adaptive_dwell_mode" - move this to scm module
"gEnableChangeChannelBandWidth" - move this to mlme
Change-Id: I1ca6657a95c2cd47057f11ccf23c47347f3fc33b
CRs-Fixed: 2394240
Add the WMM config ini config
CFG_TL_DELAYED_TRGR_FRM_INT_NAME to MLME cfg.
Introduce the basic infra APIs related to these configs
from mlme.
Change-Id: Ifaf8072a78f21760e00973e625d7c8e41d8b51a6
CRs-Fixed: 2361533
Change I3b1ee6254de158ad6408dc8c61e83be571e180af refactored 3
APF related INI's into CFG framework. This was merged with a
a copying error causing INI string "gActiveMcBcBpfMode" being
replaced by "gActiveUcBpfMode". Fix this by correcting the
string name.
Fix copying error by replacing with the correct INI string.
Change-Id: I41576b1b22287f7c0fd751ce96ceddb8f7cbc62a
CRs-Fixed: 2393504
Currently many modules use the scheduler_post_msg API which
doesn't allow the driver to know about the src, and destination
modules.
Fix is to call scheduler_post_message which has src, dest, and
the que id.
Change-Id: Ia5c43fe3ceeb7db9dde6241cbabac0ce48f88061
Remove the following scan and ap protection related ini items:
CFG_AP_ENABLE_PROTECTION_MODE_NAME
CFG_ENABLE_MAC_ADDR_SPOOFING
CFG_SCAN_AGING_PARAM_NAME
Replace the corresponding hdd_config variables and replace
these variable callers with ucfg api from corresponding module.
Change-Id: I99a2659e2151ad285e9451b9e9cc036a199581a3
CRs-Fixed: 2378991
As part of connection tracker handler, If the link is connected
then current tx and rx stats are compared with configured threshold
values. If the current stats fall below the threshold then idle timer
is initialized and idle peer data is stored in tdls soc and given as
userdata to the timer handler. The userdata is overwritten if the another
tdls peer becomes idle and this can lead to wrong tdls peer teardown.
Change-Id: I34638bdebe02e17e1c9e117e58352bdaab867921
CRs-Fixed: 2393320
Currently, in tdls soc max tdls peers are initialized
in tdls_global_init that is done as part of tdls psoc open.
But, sometimes the Ini values used to initialize the tdls
max peers are not initialized before global init
because tdls_update_config has done for the Ini vallues.
This can lead to wrong value of max tdls peers in tdls
soc and later can result in TDLS connection deny.
Change-Id: I6bb51db571129490c225737c1913b8ddafadde8d
CRs-Fixed: 2392494
Flag WLAN_FEATURE_NAN_DATAPATH was added to protect NAN Datapath
related code, while WLAN_FEATURE_NAN_CONVERGENCE was added to
protect the converged code inside NAN Component. Since the
original NAN Discovery related code has now been moved inside
NAN component and NAN Datapath cannot exist without NAN Discovery,
keeping these flags separate doesn't make sense. Combine these
two flags with WLAN_FEATURE_NAN flag which is the original NAN
feature flag.
As a cleanup of NAN code, combine all NAN related flags with
WLAN_FEATURE_NAN flag.
Change-Id: If98ecaace17f8724e9c28325ef61e721f42e1d8f
CRs-Fixed: 2377375
Currently, dual mac disable feature is populated from object mgr
psoc. But, this ini is moved to policy mgr. So, populate this ini
from policy mgr context.
Change-Id: I5d83ce0efa9130cc37734f3d7e982def4fe59ac2
CRs-Fixed:
Only when F/W indicates 2g vht20 supported and ini config
gEnableVhtFor24GHzBand=1, 2g vht20 can be enabled.
Steps:
For chips wmi_service_ext_msg supported:
1. hdd_component_psoc_open->mlme_cfg_on_psoc_enable->
mlme_init_vht_cap_cfg, read and save ini cfg:
gEnableVhtFor24GHzBand.
2. WMI_SERVICE_READY_EXT_EVENT indicates 2g vht20 capability by
mac_phy_caps->vht_cap_info_2G.
3. init_deinit_populate_mac_phy_capability calls
extract_mac_phy_cap_service_ready_ext_tlv
to extract vht_cap_info_2G, and set to
psoc->tgt_if_handle->info.mac_phy_cap.
4. hdd_update_tgt_cfg->hdd_update_vhtcap_2g->
wma_get_caps_for_phyidx_hwmode, get target capability,
and combine ini cfg, update 2g vht20 cfg in mlme.
For chips wmi_service_ext_msg unsupported:
1. hdd_component_psoc_open->mlme_cfg_on_psoc_enable->
mlme_init_vht_cap_cfg, read and save ini cfg:
gEnableVhtFor24GHzBand.
2. WMI_SERVICE_READY_EVENT indicates 2g vht20 capability by
hal_reg_capabilities-> wireless_modes
REGDMN_MODE_11AC_VHT20_2G bit.
3. init_deinit_populate_phy_reg_cap calls wmi_extract_hal_reg_cap
to extract hal_reg_capabilities, and set to
regulatory component by ucfg_reg_set_hal_reg_cap, saved
in wlan_regulatory_psoc_priv_obj->reg_cap.
4. hdd_update_tgt_cfg->hdd_update_vhtcap_2g, get and target
capability and combine ini cfg, update 2g vht20 cfg in
mlme.
Change-Id: Id4f2edd129bb1eefec3e39b4246c5f52b2b4124a
CRs-Fixed: 2384842
Required sta interface to support to tx p2p action frames, this is
part of customer requirement.
Change-Id: I1ebebce4d70dcba34427bb2276cd3e1cc23c2bd8
CRs-Fixed: 2388414
Refactor firmware, serialization and command timeouts so that
HDD timeout are greater than serialization is greater than firmware
timeout.
The timeouts are defined considering below worst case delay in
firmware.
WMI_VDEV_START_REQUEST_CMDID 6 sec
WMI_VDEV_RESTART_REQUEST_CMDID 6 sec
WMI_VDEV_STOP_CMDID 2 sec
WMI_PEER_DELETE_CMDID 2 sec
WMI_PEER_ASSOC_CMDID 2 sec
WMI_PDEV_SET_HW_MODE_CMDID 2 sec
WMI_PDEV_SET_MAC_CONFIG_CMDID 2 sec
Change-Id: I270e980ed1cf2aee55a1fa4e88ff8ddc845a203b
CRs-Fixed: 2384389
Regulatory component is getting updated to reduce the
code size based on different regulatory features. In this
process new regulatory files are getting added and some
of the files are getting removed.
To compile the newly added files update the required changes
in driver Kbuild file.
Some of the functins which are not supposed to be invoked from
outside the component directly, replace those function calls
with the appropriate wrapper functions.
Change-Id: I31a25268250b99f4f156c4f149966213746d999e
CRs-Fixed: 2373780
PM_SBS/PM_SBS_DOWNGRADE action should not
be executed again if current hw mode is sbs.
Change-Id: I9bf2666c559dbf6a3ad73aec7ee94db7c50b82a7
CRs-Fixed: 2375652
Change I1f668fff633a5e5cdfc478e7f619e9600930b333 ("qcacld-3.0: Use wma
callback to get vdev dp handle") removed the implementation of
pmo_ucfg_vdev_update_dp_handle(), but left behind the stub
implementation for use when PMO is disabled. This stub, since renamed
to ucfg_pmo_vdev_update_dp_handle(), is unused, so remove it.
Change-Id: I042ea081a4c2e5288963f7882129d06667e5b707
CRs-Fixed: 2380780
WIPHY features are populated before FW offload object is
initialized. Thus use direct config values for SAE and GCMP
WIPHY features.
Change-Id: Ic1b84c8709a0347fa22773786c0d5af32426e8fc
CRs-fixed: 2376983
Currently second STA wlan ipa interface is not deleted in case
of STA-STA concurrency for second sta disconnection. At the time
of driver recovery first virtual interface is deleted and later
existing ipa interfaces are deleted. This leads to invalid access
of second STA ipa interface net dev at the time of deletion during
driver recovery. Fix this by deleting the interface at the time of
sta disconnect event.
Change-Id: I21e46fe5c6f0b0213d139050acf229cb5ab914eb
CRs-Fixed: 2376897
2g vht20 config should be decided by both capability indicated
by target and ini config. Only when F/W indicates 2g vht20
supported and ini config gEnableVhtFor24GHzBand=1, 2g vht20 is
enabled.
Change-Id: I5b7ad8f82b6000096327c501dc84ad05480ef0fd
CRs-Fixed: 2381514
Excessive wlan ipa call back error logs when driver is in
transition stat which may leads to watchdog timeout. So rate
limit the logs.
Change-Id: I1398ea67abde53d3a5f0b5ab7c7ea1dd8553e4cc
CRs-Fixed: 2379522
Change I47cce6123566b67d4aa0c56f1cf6738f4fdbf77d ("qcacmn: Initial
power manager offload skeleton") included a prototype for function
pmo_dump_wow_ptrn(), but not an implementation. Since subsequently
an implementation was never added, remove the unused prototype.
Change-Id: I4fda06ef5cabdbff069e542319a9d5296a0e932a
CRs-Fixed: 2380102
Change I9b0126d9cc71f7de0d255981ba5fe88f3da05ce2 ("qcacmn: Define
configures about P2P") introduced struct p2p_param. One of the fields,
ignore_dynamic_dtim_in_p2p_mode, has apparently never been used, so
remove it.
Change-Id: I1c7c34d72f22c89f243d2639ec2baccb76be7dc2
CRs-Fixed: 2379074
Struct mlme_ht_info_field_2 has two different layouts depending upon
endinaness, but for one of the fields the naming does not match.
Rename the nonGFDevicesPresent field to be consistent with its
counterpart non_gf_devices_present.
Change-Id: Iafec9976d5f890ae6555af35c40186afacb5c325
CRs-Fixed: 2379073
Change Id1333a49d0538eb4ccfaf3c8498e9ca06671de02 ("qcacmn: Allow SAP
to come up on DFS channel in SCC mode") added two separate fields to
track the status of this feature. The sta_sap_scc_on_dfs_chan_allowed
field in struct policy_mgr_psoc_priv_obj was never used, so remove it.
Change-Id: I75fe9129d4df9a70af103d4b75389d75528ad422
CRs-Fixed: 2379072
As part of change I83a13b1fcc6ca4350071a71648c7072c2b2a5191
("qcacld-3.0: Move few INIs's ownership from HDD to Policy manager")
support for the gEnableSAPManadatoryChanList INI item was moved to
Policy Manager, and the sap_mandatory_chnl_enable field in struct
policy_mgr_cfg now reflects the status of this INI item. The prior
mechanism, the enable_sap_mandatory_chan_list field in struct
policy_mgr_psoc_priv_obj, is no longer used, so remove it.
Change-Id: I1675257f2a4aac3ae34e934173415f9a4064618b
CRs-Fixed: 2379071
Fields nlo_in_progress and nlo_match_received in struct
pmo_vdev_priv_obj are unused, so remove them.
Change-Id: I4152e55e407628bbcc32118aa702770a401cfe3b
CRs-Fixed: 2379076
Update the PMO packet filter APIs to make sure the parameter names
in the prototypes match the ones in the implementations and in the
documentation.
Change-Id: I7fd924d17edb54c690e8ef5b85d4829a4a165edc
CRs-Fixed: 2379075
Based on new cfg framework, defines below five WNI cfg items and one
INI cfg:
- WNI_CFG_APSD_ENABLED
- WNI_CFG_OBSS_DETECTION_OFFLOAD
- WNI_CFG_OBSS_COLOR_COLLISION_OFFLOAD
- WNI_CFG_CURRENT_TX_POWER_LEVEL
- WNI_CFG_LOCAL_POWER_CONSTRAINT
- gTxPowerCap
Change-Id: I5546ea7a4efd142b546ad10a40712d40d2d3ea0d
CRs-Fixed: 2375857
All WNI configurations will be cleanup based on new cfg framework, so
change Change WNI_VALID_CHANNEL_LIST_LEN to VALID_CHANNEL_LIST_LEN.
Change-Id: I805be88ecdcca90cf3a19d1784bf8f8c261b6ca4
CRs-Fixed: 2379748
