Add api support to read the pointer to recovery mode in shared
memory, this pointer will store the if the mode recovered is
mode1 or mode0
Change-Id: I9e8dbd32c62dbb75d27d590a5013b4a9837fae24
CRs-Fixed: 3458369
Roam background scan abort, driver print roam result
failed, but current ap is still connected.
Add roam background scan abort reason for roam fail
reason.
Change-Id: I32bc7202f1f49f9d36e2f2e49bce6e30ea36fa7b
CRs-Fixed: 3477755
When user space triggers a scan, the firmware aborts background scan,
and uses the roam status QCA_ROAM_FAIL_REASON_CURR_AP_STILL_OK instead
of "Invalid roam failures reason".
Change-Id: I8a6ed222342398d21d87e7d31956426f3c99cba0
CRs-Fixed: 3481633
wlan_cm_get_rnr, uses the cm request without lock and pass the
pointer to the caller instead of passing a copy.
Fix it by copying the rnr info while holding the lock. and move the
cm req access logic to core from dispatcher.
Change-Id: I72861021d98b996a379a2917874b5dadbc37c6af
CRs-Fixed: 3483871
Diag logging is used for logging datapath event such
as EAPOL and DHCP events
Remove legacy logging mechanism for datapath events
Change-Id: I8a987c1a4ab9954c7662e2f76e7904b02619f661
CRs-Fixed: 3470476
PMAC is giving fatal when mgmt packet is getting queued
with non-zero version in frame control
Adding a check for version before queueing mgmt packets.
Change-Id: I606513b6ce027f1126e9cd40a9909886441de240
CRs-Fixed: 3422973
-Support to route IGMP packet to correct netdev coming from
legacy and mld sta.
-Support to detect mld model based on ini setting
Change-Id: I10ea5af9a4315642b262c8404d7bebd88ee06ab1
CRs-Fixed: 3467808
Currently host only fills LPI rules in pdev_priv_obj. If
country supports VLP, SP then host doesn't fill these
reg rules and advertises the same to kernel. This results
in zero 6 GHz channels in scan list shared by kernel.
To address this issue, fill LPI rules or VLP rules or
SP rules as per availability.
Change-Id: I4c00009d6124a1cd1371c7ac537186e79e51beb6
CRs-Fixed: 3470612
Use vdev macaddr instead of bcast addr for GTK/BIGTK PN fetch.
Also, copy back TX PN back to hostapd.
Change-Id: I98fc7a78c194c84de6554a684d3ce14f66772040
CRs-Fixed: 3370635
Add code changes to handle new wmi_mlo_link_disable_event
Extract the wmi event params and store in host defined
structure.
Change-Id: I6893bfa4da7b27f4a9b1ce2936057bb3576a317c
CRs-Fixed: 3458680
Make sure the Umac reset state is updated when
the trigger is received only after checking
Umac reset in progress flag.
Change-Id: I2c6ac68bee5b69b1f083a109646cb6bf61d8cdd6
CRs-Fixed: 3487388
qdf assert always, assert without debug information.
Added support to dump needed information before assert.
Change-Id: I19898ec11c1bade4340cf1737a760d9507012f12
CRs-Fixed: 3480596
Currently driver obtains RX MCS index from RX MSDU TLV END of a
data frame. According to the specification, the MCS index should
starts with 8 rather than 0 when NSS=2 in HT mode. However, the
original RX MCS index from HW starts with 0, thus SW needs to
get a final MCS index by adding an offset when NSS=2 in HT mode.
Change-Id: Iba5f9976958233fc283513caf0184e59774ab50a
CRs-Fixed: 3471953
Change WLAN_UMAC_MAX_AID from 2008 to 1991 for reserving
1992-2007 value from AID pool for 11az TBR rSTA ranging.
Change-Id: I4e6a85d28c1391649ecc748d9b61167760858088
CRs-Fixed: 3479547
Correct reg rules for CC GB.
a. Change CHAN_5250_5330_16 to CHAN_5250_5330_12 to mark
radar frequency range.
b. Change CHAN_5735_5875_7 to CHAN_5735_5875_4 and to remove
radar marking.
Change-Id: Ie82e64fa444b6bcca3a6a31cb419179081e1c669
CRs-Fixed: 3447292
As ppe_ds is not supported on QCA5332 platform, in
case of MLO peer always setup ppe peer using primary
peer
Change-Id: Icd05b69c07c05fe2fc793f49fcf28b5d58bc8bb6
CRs-Fixed: 3480359
Add fix to update msdu start bit and other bits in network buffer.
Here is the list of bits set in network buffer
a. msdu start bit,
b. msdu end bit,
c. packet is MCBC and da bit is set
d. da valid bit is set
e. sa valid bit is set
Change-Id: I2abf346de36a7f5ac7f86b33615145bb02065dc2
CRs-Fixed: 3479230
Below code changes are made
1. Correct 5 GHz reg rules for APL 26/27 RDs.
i. APL26 changes
a. CHAN_5170_5330_3 is split into CHAN_5170_5250_8 and
CHAN_5250_5330_12 To mark missing radar frequency range.
b. CHAN_5490_5730_3 changed to CHAN_5490_5730_5 to mark the
frequency range as radar indication range.
ii. APL27 changes
a. CHAN_5250_5330_10 and CHAN_5490_5730_4 are changed to
CHAN_5250_5330_7 and CHAN_5490_5730_1 respectively to mark the
frequency range as radar indication range.
2. Remove duplicate entry CHAN_5735_5835_8 (duplicate of CHAN_5735_5835_1)
Change-Id: Ib9d0e7455d489451da8beb71175e9a9b4ff6d3ca
CRs-Fixed: 3447101
Clear the peer-level tid-to-link mapping and set
direction to invalid if-
1) Host receives updated T2LM info through
critical update.
2) There are two T2LM elements received in beacons
and mapping switch time expires for first mapping.
Apply the second mapping.
3) There is a single T2LM element and its mapping
switch time expires. Apply default mapping.
Also, initialize peer-level mapping structure
when a new peer is created.
Change-Id: I1d06ec5f2f5aa398724213a3be08b6588f78c9b0
CRs-Fixed: 3435329
Correct 5 GHz channels reg rule for CC PK.
a. Split CHAN_5170_5330_3 into CHAN_5170_5250_8 and CHAN_5250_5330_12
to mark missing radar frequency range mark.
b. Change CHAN_5735_5875_8 to CHAN_5735_5875_3 to change regulatory
power value to 30.
Change-Id: I48027de034a0cf39fe8135ffdb180b8b3fcf133e
CRs-Fixed: 3459453
handling multicast packets in the case of proxy arp
along with MLO MCAST.
1. stamp the host inspected bit for GSN based packets.
2. trigger dp_tx_proxy_arp from the reinject handler.
Change-Id: I8aea1e4fd4e61f4cc6a5dd6d8b5151c1a9bf2fac
CRs-Fixed: 3465975
Scenario: There is dual sta present in HBS mode in DUT where one
sta is on wlan0 interface and it has 11be capability, so it has
formed ML connection with ML AP. The another STA is present on
wlan1 interface and this STA also supports 11be capability. But
as per current design, host supports 11be with MLO. It doesn't
support 11be alone. Also 11be with MLO is supported only in wlan0
interface. So for another connection which are present in wlan1
interface, even if it supports 11be host will downgrade to 11ax
and form connection.
During the formation of second connection, host will sends peer
create command(WMI_PEER_CREATE_CMDID) to firmware. Before sending
this command, host checks only eht cap in cm_create_bss_peer()
and fills the mld_mac addr. Because of that, DP assumes that
there is an ML connection and it creates MLD peer on wlan1
interface. Due to this, it causes ping failure on wlan1 interface
as the ICMP response might be coming on incorrect peer and it's
getting dropped.
As part of fix, check eht cap as well as vdev is mlo supported or
not in cm_create_bss_peer()
Change-Id: I60dbb8ee91025266d0b9b48075dc2db9a407e015
CRs-Fixed: 3454128
Correct wrong frequency mapping for APL25 RD.
a. CHAN_5170_5330_3 is split into CHAN_5170_5250_8
and CHAN_5250_5330_12 to mark missing radar frequency
range.
b. CHAN_5490_5730_9 is split into CHAN_5490_5590_4 and
CHAN_5650_5730_4 to mark the frequency range as radar
indication range.
c. Remove unused reg rule CHAN_5490_5570_1
Change-Id: Iabeba570c1c0edde9221db9bc38beac59de6e179
CRs-Fixed: 3447198
It is observed that in some corner cases msdu count received
in montior destination ring descriptor is unreliable as a
result some of the link descriptor and associated monitor buf
descs are not returned. This change return such missing link/buf
descriptors and free associated buffers.
Change-Id: Iaad476b8e7a0372122981fd29c1f6e4685137817
CRs-Fixed: 3483157
Wireshark give RNR Neighbor AP bit swap which cause the RNR issue.
Create a index and bit size macro for Neighbor AP Information
field of Reduced Neighbor Report element to fix the issue
CRs-Fixed: 3462470
Change-Id: Id894bb094e3a36fe869c3897ee674d517e1e78d1
1. Read the new service capability:
WMI_SERVICE_CCA_BUSY_INFO_FOREACH_20 MHz: Via this host knows
whether FW supports reporting of CCA busy info for each 20 MHz
subband of wideband scan channel or not.
WMI_SERVICE_VDEV_PARAM_CHWIDTH_WITH_NOTIFY_SUPPORT: Via this
host knows whether FW supports VDEV param channel width switch
with OMN/OMI notification or not
2. Register osif callback to send scan done indication to upper
layer
3. Add 2 new scan flags pause_home_channel and
report_cca_busy_for_each_20 MHz
Change-Id: I63d561a3c5f8e49a3ca42d956e6b630c63edeaf4
CRs-Fixed: 3460901
wmi_handle is accessed after free to set wow_enable_ack_failed flag.
Move this to correct place to fix use-after-free access
Change-Id: I8cc956bd433776adda3ff6cca26e7c164877184d
CRs-Fixed: 3485102
Currently host is sending t2lm info to firmware multiple
times when mapping switch time expires.
Fix is to check if new beacon/prb response has updated
mapping before sending the t2lm information.
Change-Id: I10182652bf77ede2dd94bedbc1c3a76a6bc3a7ff
CRs-Fixed: 3438997
Currently the code to support Multipass on SAP is
present along with the code to support WDS. Hence with
the code in its current state, we will not be able to
enable Multipass support without enabling WDS.
Move the multipass support code out of the WDS support
code, to be able to enable Multipass for chipsets which
do not use WDS.
Change-Id: Id17035f1ada9bde56ca2c61fd4688fa3454b0b11
CRs-Fixed: 3479991
Currently in driver, we use memcpy() to copy data stored
in log buffers to multiple fields in the struct tAniHdr.
But from kernel 6.1, if FORTIFY_SOURCE feature is enabled,
then kernel warns of field-spanning.
To resolve this issue, assign a void pointer to the struct
and use it in memcpy().
Change-Id: If4d089f4118c573ef57b87b83f9a350da1674b2b
CRs-Fixed: 3465600
Free the tx descriptors borrowed by direct switch
back to regulartx desc pools.
Change-Id: I2898e57ce5eff54c1787dbebd166482d9fbfc585
CRs-Fixed: 3444334
In the AFC Enterprise mode, the AFC response-payload may need to be
reset from host. The payload reset is done by sending
WMI_SERVICE_AFC_RESET_SUPPORT subtype in the WMI_AFC_CMD to the target.
In response, the target sends the WMI_AFC_EVENT_TIMER_EXPIRY event with
WMI_AFC_EXPIRY_EVENT_SWITCH_TO_LOW_POWER_MODE (in indoor deployment) or
WMI_EXPIRY_EVENT WMI_AFC_EXPIRY_EVENT_STOP_TX (in outdoor deployment)
event subtype to the host.
Earlier, the WMI_AFC_EVENT_TIMER_EXPIRY event was sent only in
non-enterprise mode. Now, since it can be sent for both enterprise and
non-enterprise mode, we need to take care of 'afc_reg no action",
which is mandatory in case of enterprise mode.
Therefore, implement the following changes:
1) Call trigger_acs_for_afc only if afc_reg_no_action is not set.
2) Send the AFC payload reset event during SWITCH_TO_LPI and STOP_TX
event, and free the AFC payload received from the target.
3) Add APIs to register a callback to send the AFC payload reset event.
Change-Id: Ib5b3a6f51bbdf2061460fd957ca3c0ba66f23fa9
CRs-Fixed: 3462953
Add new QDF APIs to handle gpio, irqf and timer related
handling in TSF feature.
Change-Id: Iff6f85c6debe351c5533906559400b4a51333d4d
CRs-Fixed: 3469020
update the local ring mask after setting the service running flag
to avoid the concurrent access issues.
Change-Id: I209d22858f8ac7509b5337fdb1ebfe38699790e1
CRs-Fixed: 3461866
TWT requestor must set enable/disable for rTWT when device connects
to AP. Set r_twt_enable param in TWT enable operation.
Change-Id: I24c60802b49cef6486bd7df97c1833fd6d89aac1
CRs-Fixed: 3463468
