Introduce new macro to support ML external auth changes in
host driver with cfg80211.
Change-Id: Ifa9ab729ce12b261d10cddc699bfb9a5e1b4956a
CRs-Fixed: 3385381
Currently, Scan list is trimmed based on low latency sap frequency.
But even after removal of 6 GHz frequencies from scan list,
host receives scan events for 6 GHz frequencies because rnr info
is updated and hint bssids and hint ssids are added due to which
FW scans 6 GHz frequencies also.
Fix is to update hint_bssid and hint_s_ssid to those frequencies
only which are allowed to be scanned in case low latency sap is up.
Change-Id: I7f9bc6b6262a235d5aa02c9155555b4827227acf
CRs-Fixed: 3379401
Add QCA_WLAN_VENDOR_MCC_QUOTA_TYPE_LOW_LATENCY attribute
to enable/disable Multi-Channel concurrency low latency mode.
The firmware will do optimization of channel time quota for
low latency in Multi-Channel concurrency state if enabled.
Change-Id: Ibcf1ac82b2650899043ea9b61be5e1501e2d85a1
CRs-Fixed: 3409648
Do not mark REGULATORY_CHAN_NO_IR channel flag for
the 5 GHz indoor channels if p2p go support is enabled
on indoor channels.
Change-Id: I7fbae71766260513aa9946446b7e8bf8507df53b
CRs-Fixed: 3411708
This change adds rx filter reservation, addition,
deletion anad release support for optional wifi datapath
feature. The parameters required for the rx CCE filters,
are passed to FW in the HTT message. FW responds with the
result of the request. Rx data packets matching the applied
filter parameters are routed to specific REO rings.
Change-Id: I6762912bbb2aefce940d6fa3cea4871a7c89409c
CRs-Fixed: 3401148
Currently, there is a compilation error on the
OWRT SI in the alternate code path when optional
dp feature is not enabled.
The caller wlan_ipa_wdi_init_set_opt_wifi_dp() passes an
argument of incompatible type. This change fixes the
compilation issue.
Change-Id: I1f2eecbb67bfb2ef17ee73ce2faedb85827b4bbc
CRs-Fixed: 3417214
Currently when filter addition request for two
filters is sent one by one, filter handle
is not set correctly. This change handles
the condition to assign the correct filter handle.
Change-Id: I1e3ae07ee7718cf533784861003a47e6678b51be
CRs-Fixed: 3410387
This change adds the optional wifi datapath feature
to transfer data to and from modem via WLAN.
By using the existing path between WLAN and IPA, this
change registers new interfaces between IPA and WLAN
to reserve, add, delete and release rx filters,
which are required for setting up CCE filter rules.
These filters help to determine which packets need
to be routed to IPA specific REO rings.
Change-Id: I17c2ab77ae343f15d6b79fa02bb70ed62294089c
CRs-Fixed: 3403314
In MLO scenario where start/cac response for partner ML AP vdevs are
processed simultaneously on different CPU cores, the order in which
the vdev sm lock is acquired may lead to deadlock.
To fix add change to have vdev up bitmap and process sync complete
only for those vdevs for which the bitmap is set
Change-Id: I9ca8b192edeb7d491be3a7acff30c2d3545a5417
CRs-Fixed: 3403603
Add API extract_tgtr2p_table_event_tlv to extract TLVs from the response
event of rate2power table update cmd. Add a wrapper function
wmi_extract_tgtr2p_table_event and call extract_tgtr2p_table_event_tlv
from it.
Add the host event id wmi_pdev_set_tgtr2p_table_eventid corresponding to
the target id WMI_PDEV_SET_TGTR2P_TABLE_EVENTID. Also add this mapping
to populate_tlv_events_id function.
Change-Id: I0a870125120f1f92ee50002953e114b27d597ae6
CRs-Fixed: 3405417
Add APIs to register and unregister the handler of rate2power table update
response event received from target. Add the handler API
tgt_rate_to_power_complete_handler to extract the response event
parameters from WMI.
Change-Id: I462abd8a333c74b943a04c62096da647ab667adc
CRs-Fixed: 3405417
The kernel-doc script identified some documentation errors in the
umac/scan folder, so fix them.
In addition, Change-Id I8340c6c654cf03f63aee9ed622e3db38056d714f
("qcacmn: Add API to access scan entry partner info") made an
incorrect copyright change, so fix that.
Change-Id: I629f5961ab0a284c70a47fc7d71fe81d5572ae25
CRs-Fixed: 3380633
Free peer object directly if current running context is not in atomic to
make the code much more reasonable and logical.
1. If current running context is not in atomic state, it's safe to call
peer free object directly.
2. If current running context is in atomic state, then delay this free
in a work item to avoid scheduling issue.
Change-Id: I9acf97354619ed2b6c09b3f619bd10dc930d8afb
CRs-Fixed: 3412111
Add the function pointer 'send_set_sta_max_pwr_table_cmd'. The
corresponding function sets max tx power limit for each sta
The function pointer mentioned above calls the
send_set_sta_max_pwr_table_cmd_tlv API to fill the each STA max power
values in appropriate WMI structure and sends to the FW.
Change-Id: I62cba94645e942fb63415d81cd9c2a1f5be3f47e
CRs-Fixed: 3399241
Add API reg_process_r2p_table_update_response to handle the event received
from target in response to rate2power table update cmd. Make a call to
end_r2p_table_update_wait from this API to end the wait timer triggered
for the update cmd. Add end_r2p_table_update_wait to
wlan_lmac_if_reg_tx_ops. Add a dispatcher
tgt_reg_process_r2p_table_update_response for this API and register it as
a rx_ops.
Add register and unregister APIs of rate2power table update response
handler to wlan_lmac_if_reg_tx_ops. Call the register API in
regulatory_psoc_open and unregister in regulatory_psoc_close. Define
struct r2p_table_update_status_obj and its members to receive the
response of rate2power table update cmd from target.
Change-Id: I6909e37620b94dc7fdcd3c7c0915a3fad8fa1cda
CRs-Fixed: 3405417
Create the new qdf_in_atomic to wrap the kernel API in_atomic to be
used in the driver to check whether current running thread is in atomic
context.
Change-Id: I69843ff79559612561d57965a6754990e9b6f4f9
CRs-Fixed: 3414725
The kernel-doc script identified documentation issues in the QDF
time-related abstractions, so fix those issues.
Change-Id: Ieffd4a5b2a38674da1b19735ad6f35844d355f09
CRs-Fixed: 3406200
Add 160 MHz and 320 MHz BW support for Smart Antenna.
Peer connect gets rate codes for all supported BW on connecting peer
as part of wmi_peer_ratecode_list_event. This changes add 320 MHz and
160 MHz BW support.
Change-Id: I715dd5a64c38114fef6e17c2e2f6a526e1a716c2
CRs-Fixed: 3381648
Extract the scan blanking feature support from WMI service ready
event and store it in target if data structures. Add API to check
whether scan blanking feature is supported for a given pdev.
Change-Id: I65fefbb879b8433a68338bfcd3e4f729eff3ddd8
CRs-Fixed: 3413922
Currently, hardware supports checksum offload for only ipv4, tcpv4/v6 and
udpv4/v6 packets. But driver sets checksum as CHECKSUM_UNNECESSARY for
all rx packets if tcp_udp_err and ip_err bit in rx_attention_tlv is not
set. If driver sets CHECKSUM_UNNECESSARY in skb then network stack will
not validate checksum and will reply to even wrong checksum packets
which is incorrect.
So, fix is to set checksum for all rx packets other than ipv4, tcpv4/v6 and
udpv4/v6 to CHECKSUM_NONE instead of CHECKSUM_UNNECESSARY so that network
stack validates checksum.
Change-Id: Ifb9c74fb729361da6db715fa667f926b71ce948f
CRs-Fixed: 3378925
Enable or Disable PPEDS for specific
WLAN Soc.
usage:
add "ppeds_wifi_soc_cfg=0x02"
in /ini/global_i.ini to enable
PPEDS only for second WLAN SoC.
Change-Id: I65f138cf37298feac70e76b95c22507e58394618
CRs-Fixed: 3408439
The kernel-doc script is reporting an issue with the documentation in
global_lmac_if/src/wlan_global_lmac_if.c. Fix this by relocating the
documentation for wlan_spectral_register_rx_ops() so that it is
adjacent to one of the function implementations.
Change-Id: I3e0ddeb92296f321252fa861f1b8573c531ac447
CRs-Fixed: 3414237
Host and FW have agreement about using fixed pdev id for CFR on HMT,
which required changes on both sides. In case only picked host
change with old FW, which will case device broken during booting up,
add this change to set pdev id base on FW capability for CFR request.
Change-Id: Iac82074228d42c6f51ea2024defdb0272e5cb396
CRs-Fixed: 3409616
Add the following hif/ce changes to add support for wcn6450,
* New host/target wlan ce config for wcn6450
* New service to pipe map for wcn6450
* New host/ce/target table attach for wcn6450
Change-Id: I20fa1410f5e4e7a0146bc2d0b48a18269ca4a8c9
CRs-Fixed: 3381111
Currently, before sending a roamed indication to the kernel,
the host calls kernel APIs ieee80211_get_channel and
cfg80211_get_bss to confirm whether the roamed channel and
BSSID are present in the kernel scan cache or not.
In case if kernel returns the BSS pointer as NULL, Host calls
osif_populate_mlo_info_for_link API and uses BSS pointer
to populate MLO info for the link(s), this results in a
NULL pointer dereference in the host.
Fix is to avoid sending roam done indication to kernel/
userspace if kernel returns BSS pointer as NULL and issue
disconnection with reason REASON_UNSPEC_FAILURE.
Change-Id: I28f51369115a7ef20105073e4fcf6ee912c068b2
CRs-Fixed: 3404248
Current code allows for viewing Runtime PM stats via debugfs only.
Fix this by adding sysfs viewing functionality.
Change-Id: I97fe054bab5651f538c8d80ad031dc33933946a4
CRs-Fixed: 3414303
The kernel-doc script identified some documentation issues in the
hal/wifi3.0/qca8074v1 folder, so fix them.
Change-Id: I7d1b018a7ba9e8967ad8a9998a8a1757881b7ed1
CRs-Fixed: 3410790
The kernel-doc script identified some documentation issues in the
hal/wifi3.0/qca8074v2 folder, so fix them.
Change-Id: I03e263a2a8ae4cf256d143d772c3a32ed11dfe48
CRs-Fixed: 3411714
The kernel-doc script identified some documentation issues in the
hal/wifi3.0/qca6490 folder, so fix them.
Change-Id: If86930db21f7961acc067da4751641c749cadc48
CRs-Fixed: 3410723
In case of 4 LINK MLO we have link index as 0, 1, 2 and 3
so increase the MLD_MAX_LINKS to accommodate all links.
Also MAX RNR_BSS supported in 16vap 16 MLD across N links will
increase as:
For N(4 LINK) link MLO, Max RNR BSS will be given:
16(N_6G_LINKS) + N - (N_6G_LINKS) - 1(SELF_LINK) = 16*2 + N-2-1 = 33
Change-Id: If2e1755b8b99e83d8fe391220183921a70be61f5
CRs-Fixed: 3408516
The DUT should drop the mcast packet from itself when
receiving it. However, a mcast packet from the DUT
itself has been failed to be discarded due to code
refactoring. This change aims at fixing this issue.
Change-Id: Ic80aa2aeb107b7b5a1b1d88f2ee0a72e316d7fcc
CRs-Fixed: 3372169
The kernel-doc script identified a large number of documentation
issues in the QDF memory abstractions, so fix those issues. In addition,
there are a number of instances where public functions have their
implementation documented instead of having their interface
documented, so move that documentation.
Change-Id: I4e30fd85e65567485cdc7a9adfc38c69df0cfa55
CRs-Fixed: 3406199
The kernel-doc script identified documentation issues in the QDF MC
Timer abstractions, so fix those issues. In addition, there are a
number of instances where public functions have their implementation
documented. In those cases make sure only the interface is documented.
Change-Id: Ied6cf02d2091099351cd82245a667fd1e6cad461
CRs-Fixed: 3405262
The kernel-doc script identified documentation issues in the QDF trace
abstractions, so fix those issues. In addition, there are instances
where public functions have their implementation documented instead of
having their interface documented, so move that documentation.
Change-Id: Ife16fe9527dbe013003c5f2f04d7e9d0a9aa385a
CRs-Fixed: 3406201
For WDS ext use fr_ds and to_ds fields to check for
4-addr instead of reading value from TLV
Change-Id: I261746018de2320367e8650332a5c355edfb1489
CRs-Fixed: 3410639
MLO global shared memory arena accesses from the Host side will not go
through any implicit endian-ness conversions. Hence, convert the DWORDS
to the Host CPU order before using them.
Change-Id: If24edc7c6ef59fc82352d081b01a4baaaff65e02
CRs-Fixed: 3406980
The kernel-doc script identified documentation issues in the QDF lock
abstractions, so fix those issues.
Change-Id: Iee0576e2e64d9d67942238d758f3cbca36069356
CRs-Fixed: 3406198
Currently few macros related to CE descriptor are defined in qdf_types.h
Which is not the right place to have such macros. Hence moving them to
ce_internal.h file.
Also, have different macros for WCN6450 as the ce descriptor offsets got
changed for WCN6450.
Change-Id: I20414273793034bbab80304bcd643371d281fb7f
CRs-Fixed: 3386470
The FW needs mlo_flags of partner links as well during Assoc,
to handle more than 2-link MLO Association.
Extend the peer_assoc_ml_partner_links struct to pass them.
CRs-Fixed: 3403848
Change-Id: I543442ded6b5bc55c278b32f3d449eabacc49919
The FW needs mlo_flags of partner links as well during Assoc
to handle more than 2-link MLO Association.
Extend the mlo target link info struct to pass them.
CRs-Fixed: 3403849
Change-Id: Ia426cf16a5d8cfa1f6e4117a0b372899642494c6
The kernel-doc script identified some documentation issues in the
hal/wifi3.0/qcn9224 folder, so fix them.
Change-Id: I30e75bf3febabfb1c655f96f039059cf365916c8
CRs-Fixed: 3411783
This change will hold the PCIe in L0 state for the
duration of this feature. The hold will be
released after data transfer is complete.
Change-Id: I762bc3423059ad641bdd00ac5b301a1e1b16f6c2
CRs-Fixed: 3406490
