Firmware advertises service capability bit
WMI_SERVICE_PEER_DELETE_NO_PEER_FLUSH_TIDS_CMD
when peer delete command takes care of flush
all tids functionality.
If this service bit is set advertised by FW
then host does not need to send the flush tid
command before sending the peer delete command.
Change-Id: Ic6632772eeebc7f1494f1dd5e9d533b2bc22e533
CRs-Fixed: 2609962
Update value of new ini for separate iface support for NAN
"nan_separate_iface_support" to fw through a command
WMI_INIT_CMDID.
Change-Id: I55830e0d16d86ee5a0bfa7d3e44c6309c0d3d54b
CRs-Fixed: 2612010
Currently, the driver rejects the roam stats event if any of the
roam trigger or roam scan or roam results tlv is not present.
Now the firmware will send neighbor report immediately after the
neighbor report response is received from AP instead of buffering
it as done before.
So do not parse the roam trigger, roam scan, roam result tlv if
the tlv is not present. Add new flag in the tlv parsing structure
if the TLV is not present.
Change-Id: I366d8853f7f45dcdac6d4aa5c3a8a12a8b602a4f
CRs-Fixed: 2610377
As part of new requirement WLAN subsystem needs to perform thermal
mitigation action as per the thermal state of the device. The
wifi hal sends vendor command QCA_NL80211_VENDOR_SUBCMD_THERMAL_CMD
with the thermal level parameter and wlan host performs the required
appropriate action. wlan host driver maps the thermal level to
corresponding duty cycle off percent value and duty cycle value,
send WMI_THERM_THROT_SET_CONF_CMDID cmd to FW.
Make changes to perform vendor command handling, mapping thermal level
to duty cycle value and communicating the thermal information to FW.
Change-Id: I5b455ae6483f3d5bf2fe708f40c32a55eb8b9bdb
CRs-Fixed: 2610404
This patch adds the support for forming tlv commands
WMI_AUDIO_SYNC_TRIGGER_CMDID and WMI_AUDIO_SYNC_QTIMER_CMDID.
CRs-Fixed: 2607605
Change-Id: Ifaf2b43b60cf604d79d5649b27632422850a0d61
Add support to fallback the PMKID generation from firmware to
wpa_supplicant.
Firmware fallbacks PMKID generation to host when FIPS enabled
due to the crypto library availability limitation.
Once the roam candidate selection is done in the firmware, it
sends the WMI_ROAM_PMKID_REQUEST_EVENTID. Once this event is
received, the host driver triggers an event to wpa_supplicant
for PMKID generation.
Change-Id: Ica00d27ce3f9f4a8f966261b38e238c389fcf05c
CRs-Fixed: 2507617
Avoid direct fw headers usage in init_deinit component since
can have functional impacts. The inclusion is done at wmi level
to fix the inconsistency of code.
Change-Id: I73cc1aac500cec041de81750b9c7654d21344e6c
CRs-Fixed: 2505399
Add WMI support for broadcast twt sta invitation and
sta kickoff. Additionally, update the current WMI twt
fields to include btwt recommendation and btwt persistence.
Change-Id: I88dee854557bbb8c3263f42041e0b90a07cdd27e
For Genoa, the WLAN FW enables IPA by default, if the
IPA is disabled by kernel config, the IPA status is
not same between wlanhost driver and WLAN FW. So add
such info in the first WMI command to let WLAN FW knows
the IPA state from host, and do the according copy engine
initialization, otherwise, the mismatch IPA copy engine
configuration will casue the Genoa FW assert.
Change-Id: Iec2f86ffb40b296c51bee41adc0d895beb200e5c
Firmware advertises service capability bit NAN_VDEV_SUPPORT for
separate NAN vdev creation. This capability can be used to create
separate interface for NAN discovery and process corresponding
commands from userspace.
Change-Id: I4f81b354433c34e8bfe264f69e4eeaf6670f2fac
CRs-Fixed: 2592016
CFR config is passed on to FW through WMI
CFR feature code is moved into feature specific WMI file.
Change-Id: I00b57ea2ef4ec5520eb565910ac2c0a6478170e3
CRs-Fixed: 2582846
Add peer assoc parameter for 6GHz Band Capabilities information
for the corresponding FW peer assoc parameter.
Change-Id: I3bc4361e449843cf73db8426d3bd97dbcd9903ed
Add wmi resource flag to send packet capture from host
to FW. Register Offload Event Id for packet capture mode.
Change-Id: Icd9e542a517c8b267a228324b7612ddded28f182
CRs-Fixed: 2528439
Add WMI unified APIs to extract PNO related WMI events in order to
remove wmi.h inclusion in target_if_scan.c.
Change-Id: I7fd28f175de002b48c294783f69b819ce2f3e37a
CRs-fixed: 2519032
Currently use of comamnd QCA_NL80211_VENDOR_SUBCMD_OEM_DATA
is to pass data blobs from Application to FW but there is
no mechanism to send the data blobs from FW to Application.
To meet the above requirement update the usage of existing
OEM DATA command to use it as a vendor event as well to
send data blob from host to Application.
Change-Id: I8df98f850f4dd56f55dba43c5364a52c425ba9ed
CRs-Fixed: 2573468
After every roam happens or when neighbor report is sent by the
firmware, it sends the WMI_ROAM_STATS_EVENTID to host.
Add support to handle WMI_ROAM_STATS_EVENTID event from target
after every roam.
Change-Id: I4474135ac64ebfb17109d503fbd1c3d637457a73
CRs-Fixed: 2576258
To enhance visibility of 6GHz AP, 6G only AP shall send
Fils Discovery frame periodically in one beacon interval.
Change-Id: I51487380fca10418d2260dc2612e2adcf6cbb93b
CRs-Fixed: 2562434
Add new stats_id WMI_REQUEST_MIB_STATS &
WMI_REQUEST_MIB_EXTD_STATS in WMI_REQUEST_STATS_CMDID
to retrieve MIB statistics from fw.
Change-Id: I17bccc2673d1a2ce035db04d8426bab49db80790
CRs-Fixed: 2548165
Currently the driver doesnot support the sending and receiving of the
ani level from the firmware.
Add WMI and driver framework support to fetch the ani level.
Change-Id: Ib8271a2b7f62bafb22429113fbfb405cc81379ed
CRs-Fixed: 2554677
This print is a debug measure that addresses an issue where the
HE MCS NSS Map is set to an invalid value. Although rate checks
exist already which take corrective action, this proactive print
adds information useful for addressing corner cases should
they appear.
CRs-Fixed: 2554277
Change-Id: I8e770639472409d96654dc8652ea8c9d210c4965
Add WMI changes for the API he_muedca_mode
to swicth between manual, host and FW dynamic
muedca param selection.
Change-Id: If43b5da483fe082294bda33f8951187ebc7ea3c7
CRs-Fixed: 2554378
Set WMI_PEER_INTER_BSS_PEER peer flag in the fixed param in
WMI_PEER_ASSOC to differentiate between inter-bss and intra-bss peer.
Change-Id: Ic3f54646bfcf988ce53c3d581bacea65070a5036
1) Add Spectral scan mode and agile center frequency in WMI
commands to indicate the current mode.
2) Obtain the Agile Spectral capability from the chain mask table.
CRs-Fixed: 2455967
Change-Id: I88ba6fc1ecf9b530a6b516d0c1e4ce88702c6d1f
Currently the FW expects the flag of
scan chan cmd to be set if the max BW
is filled for all the channels, which
is not set by driver.
Fix is to set the flag's 2 bit to allow
FW to use the max chanel BW.
Change-Id: Id3ce009fbd3c846713d456436c70b44a44428577
CRs-Fixed: 2550434
Add API to know whether 6ghz is supported. Also add API to know
whether an operating class is 6ghz operating class.
Change-Id: I75747502c0033e31d119e58a2254b220646bba10
CRs-Fixed: 2556998
1) Remove the definition of plm_ch_list from
struct plm_req_params and add plm_ch_freq_list
into the same struct given frequencies will be
used directly before passing WMI command to
firmware.
2) Remove redundant channel frequency list from the
following API functions' parameters:
send_plm_start_cmd
wmi_unified_plm_start_cmd
send_plm_start_cmd_tlv
Change-Id: I982412076b422356037d9bbfa2077affd1056189
CRs-Fixed: 2560085
target_if F/W event handler is moved from wma to cmn part per
MCL/WIN converge requirement, clean up legacy call back.
Change-Id: Ifacc6bb46e6bde1a73d9953e3403551dd2e92939
CRs-Fixed: 2555080
Add WMI scheduler thread context execution framework
to process firmware events in the common project.
Change-Id: If56a4767ee9428d2f93d54ccbf5a8bb17e89e0f4
CRs-Fixed: 2554727
Add a qdf counter to know number of qmi stats requests. Reset the
counter when WoW is exited.
Change-Id: Ie0c51fbd6eb2e7530dba01912443e7fc85726e52
CRs-Fixed: 2539999
