Update enhanced Tx stats from Tx HTT PPDU completion path in WKK.
Define and use function pointers for architecture specific
functionality.
Change-Id: I4ba443647dbd81c83e899c0f88c5d9a4cc695e14
CRs-Fixed: 3132255
Added change:
1. Set/reset RXDMA MON STATUS ring filter setting and send HTT
message to capture undecoded frame
2. Handle undecoded frame to update cdp_rx_indication_ppdu structure
from hal ppdu_info rx status and generate WDI event to deliver it
to upper layer
Change-Id: I14485f28333b113b5a2fab639611551c2b08af2b
Add support to update tsf timestamp on driver entry and
exit in data packet. This helps debug latency issue in
XR usecases
Change-Id: I9c966c1b8cb09dc5eab6104fdad36c19a1d68045
CRs-Fixed: 3090108
Add function pointers to free buffer address stored in status buffer
and support tx monitor in legacy and Waikiki flow.
Change-Id: I28612d388009292ff751fe514183fb801909f485
Add support to set enhanced stats in pdev via cdp pdev set param
functionality.
Change-Id: I4c271dfc71511a0869a795c2adbb0e0eb55ba9d0
CRs-Fixed: 3108103
Multicast support for MLO
1. Following functions are newly added.
dp_rx_igmp_handler()
dp_tx_mlo_mcast_handler_be()
dp_rx_mlo_mcast_handler_be()
dp_mlo_get_mcast_primary_vdev()
Change-Id: If215f843369e6e2621ef302b924e524c86f0d30b
Currently is_assoc_link flag in cdp_peer_setup_info just means first
link peer during MLO connection, but usually assoc_link is the
link which initialize MLO association and it will be the primary_link.
this introduce confusion with another flag is_primary_link.
Change it to 'is_first_link' in cdp_peer_setup_info
Change-Id: I8d14da73e6a3bbc39a4a527d6c0aa5667255e995
CRs-Fixed: 3090270
Add function pointer to update stats for LI and WKK
Add new fields in structure cdp rx stats
CRs-Fixed: 3071271
Change-Id: I6a1d7afbdfe47d171335d55bf66d210d785f5a03
In BE architecture, HW provides basic vdev stats support for upto
48 vdevs. For each vdev, there is vdev_stats_id which represents the
id of this vdev on HW. This vdev_stats_id is assigned by host and
is conveyed to HW at the time of REO TID Queue setup for the peer.
Add logic for allocation and deallocation of vdev_stats_id and
convey this id to HW.
Change-Id: If5611bf54d057ccf71c6444b5c79a26eb28df87e
CRs-Fixed: 3067843
Add configuration at SOC level for hw vdev stats in BE architecture.
Following config parameters are added:
vdev_stats_hw_offload: option to enable/disable hw vdev stats
hw_vdev_stats_timer: timer duration for hw vdev stats
Change-Id: I8cbd2b6a7378d8a9e7de920a3a6fdff0cf7785fe
CRs-Fixed: 3067843
In the case of RAW mode, VAP parameters encap type, dscp_to_tid map id
and cipher are not updating in bank register.
Added a API to update vdev param.
Change-Id: I702bee563e7451f403fa32292bf20680cd66e213
CRs-Fixed: 3078687
Define MAX MCS to as per 11be
Define packet type as per 11be
Add new RU values
Add new BW gains
CRs-Fixed: 3068482
Change-Id: I18b2460011e2869608fe24743e4373e3e8f3fc1a
Split setup API for IPA Rx Refill Ring into allocation and
initialization APIs and call them at pdev attach and pdev init
respectively.
Similary split cleanup API into deinitialization and free APIs
and call them at pdev deinit and detach respectively.
Move procedures related to IPA Tx and WBM rings from pdev to soc.
Also add cdp support to set ipa cfg parameter in soc_cfg struct.
Change-Id: I04bb9270ae2dff51746a42b358fbe346f1087f84
CRs-Fixed: 3053542
Rx patch changes for multichip MLO
1. Create ini for rx ring mask for each chip
2. Configure hash based routing for each chip based
on lmac_peer_id_msb
3. Peer setup changes to configure lmac_peer_id_msb
to enable hash based routing
4. Rx Replenish changes to provide buffers back to owner
SOC of reo ring
Change-Id: Ibbe6e81f9e62d88d9bb289a082dd14b4362252c4
Changes needed for MLO soc attach to pass chip_id,
dp_ml_context from upper layer.
This change also takes care of assigning appropriate
RBM id for IDLE link descriptors based on chip_id.
Change-Id: I8f5f08c524d91942e6e458f048700b7bdd900107
Dynamic GRO feature is enabled by default and aimed for specific
customers. Add an ini control to allow other customers to config
this feature enable/disable.
Change-Id: I7f505599327ac131b3cdac9b4d9e038861b1aeb6
CRs-Fixed: 3074689
As part of code change we are removing csum_enabled flag check.
In that case, csum_enabled becomes redundant since we are not using it
in the code base, So remove redundant code as part of the cleanup.
Change-Id: Iac411b20f06436053b1969a1af9e3b3ee418c34c
CRs-Fixed: 3070858
Add dp functionality to collect stats for sysfs buffer.
Add both host and fw stats.
Change-Id: I64f84804d36cccec9d701925d96cc7ee96943b7a
CRs-Fixed: 3035864
Add changes to register separate function pointer to receive EAPOL
frames instead of using regular RX path and adding export symbol
for __qdf_nbuf_data_get_eapol_subtype() to access in it multiple
modules
Change-Id: Id05b982d31a7e008536d10dd5281e88cceba96db
Host updates BAR info to H.W when out of order or 2K jump
BAR frame is received. But some AP's frequently transmitting
out of order BAR frames even before reception of all the
frames in the current window, if station updates window
and SSN based on BAR frame, RX frames sequence number in
older window range which are yet to be received suffers
REO aging timeout and causes RX packet delay to avoid
this skipping BAR update to H.W conditionally.
Change-Id: If56571ffc0dc0880d7104ea3bb193ed9766124dd
CRs-Fixed: 3015643
Conditionally compile scan radio special vap stats.
Also rename spcl_vap to scan_spcl_vap to better reflect
funtionality.
Change-Id: I7d7f636209f6aa12cca0a3e808d7ae1fac9f397d
CRs-Fixed: 3009837
-Add flag to inidicate special vap configuration
-Add frame type counters while processing tlv
WIFIRX_MPDU_START_E
-Add function to update special vap rx stats
-Add dp pdev param to enable/disable special vap
stats reset
-Add function to reset special vap stats
-Add fucntion to get special vap stats
-Add CDP function to retreive special vap stats
Change-Id: Ia5de6743e472dc86c9e66b9e789c909a57025e35
CRs-Fixed: 3005425
This change will receive SCS procedure based parameters from
the control path and the peer will start building it's database
for traffic classification using SCS procedures.
Change-Id: I4fd7db595e0645285a95d0561eb46343238fa337
CRs-Fixed: 2970408
Add iwpriv option 34 to dump the reo rx h/w descs
in DDR for debugging. This cmd will first send cache
flush cmd to REO for all rx tids and invalidate the h/w
cache. Henceforth ensuring that the reo status tlvs and
the DDR values are in sync.
iwpriv wlan0 txrx_stats 34 0
Add fix to ensure bar frame with 2k jump err code is
processed correctly using the REO error code instead of the
REO push reason.
Change-Id: Ia05be668343f3a5d4b3262b8d6a367a50875add5
CRs-Fixed: 2895965
sequence number populated from tlv are incorrect for some frames.
Firmware populate correct sequence number for management and control
frame either in payload or tlv itself.
added field to get valid sequence number.
Change-Id: I21b1c34c0d66cb46c3a0baaaa231c952de065534
In security mode, allow only EAPOL frames in receive path
when peer is not authorized. This feature is enabled per VAP
based on vdev flag and will be applicable for all peers in that
VAP
Change-Id: Ic5dea09c2083f31e8cd301a0cdc3565f247b735c
Add cfg_dp_sg_enable to get ini key dp_sg_support by cdp_cfg_get.
And add some comments for CFG_DP_SG to clarify more.
Change-Id: I34de242eacbdcf55398afe64b91f5534f205fa22
CRs-Fixed: 2822536
Add the flag "is_exception", to indicate that the
packets belonging to this flow are not to be aggregated
by FISA.
Change-Id: I3c1e781d4a2ad251082dacc189f23ffab15ae002
CRs-Fixed: 2810360
Add a ini control field to control rx frame pending check
logic in WoW case. In some cases, power consumption is more
important than rx frame ping loss, so add a control flag
Change-Id: I8c4d3725edddb82a0f06dc70c22a8dd5243209f2
CRs-Fixed: 2806786
Use AST override feature to send out multicast packet in
4 address format. Pass per packet peer_id from osif layer.
Change-Id: Ic86120169c89e7972caa3cc8c967de72670314d0
CRs-Fixed: 2775051
- Added data structure for wds ext peer
- Enhanced DP peer structure to maintain
wds ext peer data structure, which inturn
maintain pointer to osif device.
- Enhanced DP vdev structure to maintain feature
configuration, which will be updated during vdev
creation when feature is flag is set at control
psoc.
- Enhanced cdp_vdev_param_type and cdp_config_param_t
to set wds ext configuration into DP vdev
- Enhanced cdp_cmn_ops structure and corresponding
call back definitons to get peer id, which will
be saved in osif private structure and to set
wds ext peer rx.
- Enhanced cdp_ctrl_ops to send event to control
path when 1st 4 address frame is received from
backhaul.
Change-Id: Ide0ea54e7b2d480ad646fb84b6e4e3108930f986
CRs-Fixed: 2773492
1. Add flag to support hlos id override feature in dp vdev
2. Update tid from nbuf->priority in dp_tx_send
3. Update tid to nbuf->priority in dp_rx_process
Change-Id: I66e8d77733a667f3f60b77e0d7bb444f7c5ad93d
