Currently there is a single INI item tcp_udp_checksumoffload to enable
or disable this feature for all the adapters. In some cases, we want to
be able to enable this feature selectively for NAN mode.
Add nan_tcp_udp_checksumoffload ini item to enable or disable checksum
offload feature specifically for NAN mode. If
nan_tcp_udp_checksumoffload is 'true' and tcp_udp_checksumoffload is
false, hardware checksum offload will be enabled only for the NAN
adapter and not for other adapters.
CRs-Fixed: 2693638
Change-Id: I6e255ce68ddc7b01ebdefe4e5e8d2c985388fefe
Configure the client as isolated peer if part of isolation
list while creating/associating the node or adding the peer
to the isolation list.
Do not forward the packets to and from clients in isolation
list instead accelerate to upper stack.
CRs-Fixed: 2689868
Change-Id: I67fd4dee0fb76c993746cdd66c70c241d407239a
Set OL_TXRX_NUM_LOCAL_PEER_IDS to WLAN_MAX_CLIENTS_ALLOWED
if WLAN_MAX_CLIENTS_ALLOWED is defined.
Change-Id: Ifb5c6ab15e791f92aa8503537e624195cf3fad6d
CRs-Fixed: 2694492
Soc level exception descriptors limit is sent from FW in WMI service
ready TLV. Using that to check for exception packets limit
Change-Id: I99d20ecbb6a5bfd61b5a8a205775d34749eae880
In case of driver unload, there can be a race condition
since the timer for processing monitor status ring can run
in parallel to the unload time wow ack response handler,
which is also flushing all the monitor status ring entries.
To avoid this race condition, stop the monitor reap timer
as a part of target suspend, and process all the outstanding
entries in the montior status ring.
This will make sure that the monitor status ring is
processed from only one context at any given time.
Change-Id: If61327c73fdddc414b3957b69ae986f2a26bb803
CRs-Fixed: 2677812
Do a logical split of dp_soc_attach and
dp_pdev_attach into Allocation and initialization
and dp_soc_detach and dp_pdev_detach into
de-initialization and free routines
Change-Id: I23bdca0ca86db42a4d0b2554cd60d99bb207a647
- For directly connected peers, during peer de-auth,
a Single Peer delete request to the FW from host
should delete all AST entries attached to the peer.
- This optimization is aimed at optimizing host-fw
handshake messages
Change-Id: Iaebe2022f90ef9a10a6a0f37b21c409cf9e9ea39
CRs-fixed: 2647242
Enable monitor destination ring interrupt to fix
packet is getting stuck in monitor mode.
Fix and add monitor mode debug count
Change-Id: I74efdcf6a4373dd73e373285c8cd3aa5757cd0b2
As part of componentization of packet capture feature
removed cdp ops of packet capture.
Change-Id: Iea07cbdc5782dee58cd1c87377363cc26479464f
CRs-Fixed: 2659439
This mode is supported through hw_mode_id 7. A special mode for
IPQ8074 platform alone to bring up single pdev alone on 2G mode.
FW would advertise the mode 7 support through the WMI service
ready message and this mode will be the default mode for AP-HK10 alone.
Added preferred_hw_mode and target_pdev_id into dp structures so that
they can be used to configure the dp rings for this particular mode.
Also changed the lmac_id to target_pdev_id mapping for mode 7.
Change-Id: I3aae46fea13132eebaf7d37cff68ef517253d229
Enhanced channel frequency response (CFR) based on monitor status
ring, need to enable mon reap timer before starting CFR and disable
the timer after stopping CFR capture. This change adds interface to
enable/disable monitor status ring's reap timer.
Change-Id: I843433ac07c4d55e14b42855ee22779eb7ecb678
CRs-Fixed: 2639307
Initial changes for ipq5018 compilation.
Added device ID and target type checks for ipq5018 traget.
Change-Id: Ib86a371fbe66749fcb6d114e7a4a9931b684e03d
Add following changes:
a. Add CDP API to config full monitor mode
b. HTT configuration changes
c. Init/Deinit changes for full monitor mode resources
CRs-Fixed: 2632442
Change-Id: I06db5194031b3ea0f0c1e5deda20df4bc0faa0b9
pdev_id is being initialized with 0. Since 0 is valid pdev_id, though
pdev is not present for that id, it is being accessed.
Initialized pdev_id to 0xFF by default. Added checks on API to
detect valid pdev_id value corresponding to lmac_id
Change-Id: I2b2a38783615494ccc08e265702815f7e562214b
In case the bus is in low power mode, the register writes (followed by a
memory barrier) may take a long time (~4ms). This can cause the caller
to block till the PCIe write is completed. Thus, even though PCI
writes are posted, it can still block the caller.
Hence, in case the bus is in low power mode (not in M0), or not in high
throughput scenarios, queue the register write in a workqueue. The
register write will happen in the delayed work context. In other cases,
i.e ,when the bus is not in low power mode or in high thoughput
scenarios, do the register writes in caller context.
Change-Id: Idf218e4581545bc6ac67b91d0f70d495387ca90e
CRs-Fixed: 2602029
Send peer_id in peer_add_wds_entry API of ol_if_ops,
so that the dp peer doesn't need to be explicitly
retrieved in corresponding offload API.
Change-Id: Ia32d31946de43e9faa1970f4e74f2810f4125995
CRs-fixed: 2629475
Move RCC specific debug statistics to Data path
to avoid allocating nbuf for the PPDUs for which
MAC has not sent a Freeze TLV. Instead just update the
debug statistics at an earlier point irrespective of
MAC sending Freeze to PHY, to gather below information:
Status of number of PPDUs being captured by PHY
Status of MAC sending freeze TLV for the PPDUs
Update freeze reason for the number of PPDUs received
Add support to clear debug statistics at user's will.
Change-Id: I8def3ce1f3ecc0b169030704db3fb1fb1c0a20ee
CRs-Fixed: 2609604
Add doppler and spatial reuse in ppdu descriptor to be able to use it on
HE information for tx capture
Change-Id: Id87a692a89d00c64929624c22c2efc27bc873e43
Add code to move enum _ol_ath_param_t out from common DP code
and move it into OL layer
Change-Id: I92fa5f52c581a18449ab42da41ff5f6f1a2bc595
Crs-Fixed: 2560866
Currently mesh mode uses channel numbering which is derived
from APIs that don't support 6GHz channels numbering due to the
overloading of 6GHz channels with 2.4GHz and 5GHz.
Add support to obtain the correct channel number (and auxiliary
information like band and frequency) through the new APIs that
support 6GHz.
Change-Id: Ib0b39ebae2a22bd6b2b5d17b9058c3c2100e0d59
CRs-Fixed: 2605229
Peer key security type is set in cdp_set_pn_check,
this API is called in key install step, but only
update Ucast field even if in Mcast key install.
This may be set wrongly if Ucast and Mcast security
modes are different. Add a new API to set security
modes of differ key types separately.
Change-Id: Icaa63139d117de75633ca1f81eb618c6b9294b53
CRs-Fixed: 2617461
Increase the peer ref count before requesting for reo
queue stats and release the ref count after receiving
the queue stats on the reo status srng.
Change-Id: Ife3b87951e767414efa1bfb45486cd364578d2a7
CRs-Fixed: 2604862
Memory optimization of unused TX rings by not configuring rings that are
not being used. Configure 2 rings for host in the case of IPA, instead
of configuring 3. If IPA is disabled then configure only 1 set of TX
rings for host.
Change-Id: I251606c728f3020a13e45e8c8386970c8a641f0a
CRs-Fixed: 2530572
Maintain packet counters for each peer based on protocol. Following 3
protocols are supported
* ICMP (IPv4)
* ARP (IPv4)
* EAP
Change-Id: I56dd9bbedd7b6698b7d155a524b242e8cabd76c3
CRs-Fixed: 2604877
A framework is added where the filters for every
mode are stored on a radio instance. Whenever a mode comes
up, it stores the filters in the radio and calls a
common API which iterates through all the enabled
mode filters and loops through them to create a
superset of filters which is sent to HTT.
This framework can be extended for new feature addition
which set filters for the monitor status and monitor
destination rings.
Change-Id: I9b739af2086bbe261b65c57af0a5bd867294f30f
CRs-Fixed: 2585872
In case of wlan suspend if packet log is enabled stop the
monitor reap timer and reap the pending frames in the ring.
Also in case of FW target suspend ACK status reap monitor
status ring. During target suspend FW will disable the monitor
status ring. This change will make sure no pending frames in
the ring during start of system suspend and the target suspend.
Change-Id: I350fa508f3ddd125d5e00a7fc60e89507ce8fb4e
CRs-Fixed: 2604389
Lithium HW can parse each MSDU when packets are enqueued to transmit
classifier and each MSDU can get enqueued to different MSDU-Queue.
By default, there are 2 queues per TID – UDP and NON-UDP. Based on
the flow parsing, packets will be queued to either of them.
Enterprise customers uses RAW mode frames which transmit classifier
would not be able to identify L4 protocol for UDP or NON-UDP queue
for encrypted frames.
Customer can also have different application based packets which needs
to be enqueued to differently prioritized queues. They can choose to
tag each MSDU based on application DPI and derive the flow priority
as below –
• UDP
• NON-UDP
• HI-PRIO
• LOW-PRIO
Customer needs API support from host which will provide an ast-index
based on a particular flow id given peer mac address. Based on the mac
address, host will find the associated peer and return the ast_index &
cache set number corresponding to the flow id from peer flow based ast
entry table. Customer will then program this ast-index and ast override
in transmit classifier CMD ring to enqueue MSDU to a specific
flow-queuein TQM.
Host API:
Input parameter – uint8_t *peer mac address, uint8_t flow id
Output – uint16_t ast_index
Change-Id: I79557c31532514ad5ec0c1848827a3e5cd91cdf2
Add API to set/get monitor vdev count in pdev object.
Also update the max peer count in pdev and psoc when FW allocated peer
count is different than host requested.
Number of vdevs and beacon tx offload max vdevs in wlan_res_cfg are updated
in target_if_update_pdev_tgt_info().
Also, add radio related parameters to get number of vdevs and peers per
psoc and pdev.
Change-Id: I0165f3bd4638280b45ad54391319806fba62e2fe
CRs-Fixed: 2600984
Add ast-type as argument in wds peer create command.
This helps to identify the ast entry from the time when ast add is done.
Change-Id: Ia0c073cf8f2573608e6a84410dffee6edf9b064b
Provide an API to fetch required individual peer stats
from the data path peer stats instead of copying the
whole peer stats structure.
Change-Id: I1c9619bc7d9bb0e3e3df6d38cc5f4570869e31fe
