Currently the cdp apis are given pdev/vdev/peer
handle as its arguments, which is directly
accessed in those APIs. This can cause a
race-condition in access of the respective
handles if it has been deleted in parallel.
Hence as a part of cdp convergence, pass only
the pdev/vdev id or peer mac address, which will be
used to get the respective handles, and hence
avoiding the unwanted access of the handles if
it has been deleted.
Converged throttle_ops
- throttle_init_period
- throttle_set_level
CRs-Fixed: 2539816
Change-Id: I2e4b3f88f6fdded6306710eb9f0c56f3354428aa
Currently the cdp apis are given pdev/vdev/peer
handle as its arguments, which is directly
accessed in those APIs. This can cause a
race-condition in access of the respective
handles if it has been deleted in parallel.
Hence as a part of cdp convergence, pass only
the pdev/vdev id or peer mac address, which will be
used to get the respective handles, and hence
avoiding the unwanted access of the handles if
it has been deleted.
Converged delay_ops
- tx_delay
- tx_delay_hist
- tx_packet_count
- tx_set_compute_interval
CRs-Fixed: 2539814
Change-Id: I15f4395f03f7321d047a230b41a5c939b52ce271
Currently the cdp apis are given pdev/vdev/peer
handle as its arguments, which is directly
accessed in those APIs. This can cause a
race-condition in access of the respective
handles if it has been deleted in parallel.
Hence as a part of cdp convergence, pass only
the pdev/vdev id or peer mac address, which will be
used to get the respective handles, and hence
avoiding the unwanted access of the handles if
it has been deleted.
Converged flowctl_ops
- flow_pool_map_handler
- flow_pool_unmap_handler
- dump_flow_pool_info
- tx_desc_thresh_reached
CRs-Fixed: 2539812
Change-Id: I084d3878df84778622340e87bddf90acd3e669d6
The datapath vdev handle is not to be used outside
datapath layer. So the cdp api for getting txrx stats
will pass vdev_id instead of the vdev handle.
Pass vdev id instead of vdev handle for the cdp api
used to get txrx stats. Use the vdev_id to retrieve
the corresponding vdev handle in the txrx stats handler.
CRs-Fixed: 2560364
Change-Id: I57b6c6b232d122583e85929fa972d68bc54e84e0
Changes are done to extend vdev based pause/unpause to
peer based pauses/unpause. Added changes to mark peer
as tdls peer and supports TDLS offchan operations which
will be used to pause/unpause the peer queues based on
pause type coming with pause event from FW.
Change-Id: I3976501c318ae5a295e71ed2265db04496974c7a
CRs-Fixed: 2508209
Add support to account for TSO jumbo packets on the
Tx path and print the statistics using dumpStats 3.
Change-Id: I6cc446df5c84e3ac436d922935fcd559e0704ec5
CRs-Fixed: 2356244
In cases where one of the interfaces is a P2P-GO and
IPA has been enabled, the P2P connection establishment
fails.
When IPA is enabled, the REO destination is changed to REO4
which can be reaped only by IPA module. But in case of P2P-GO
interface in operation, this change in configuration causes
all the RX packets to be stalled due to incorrect REO configuration.
Hence, to avoid this case, do not change the REO dest config
when the interface subtype is P2P.
CRs-Fixed: 2498315
Change-Id: Ie9f01c3b353c7c0503e1541d6c79c2f47c9782f3
Cleanup cdp_fc_get_tx_resource to be peer mac address based
from local peer id based.
Change-Id: I241377c75f09e9f0e177a167905cd9461ffcd088
CRs-Fixed: 2508146
Cleanup dp_get_vdev_by_sta_id to be peer mac address based
from local peer id based.
Also, modify the API cdp_peer_get_vdev_by_sta_id with additional
argument for peer mac address.
Rename cdp_peer_get_vdev_by_sta_id to cdp_peer_get_vdev_by_peer_addr.
Change-Id: I889538b5ea7ebac8973dcaaa5ebdad1ac495e791
CRs-Fixed: 2504569
Since tx_monitor mode and rx_monitor mode consume signficant MIPS
when enabled on a per-peer basis, new requirement is to enable such
functionality on a per-peer basis. New CDP APIs are added to set these
per-peer parameters.
CRs-Fixed: 2494471
Change-Id: Ib44845ec98481cc4df36c30f47335522e5274568
Cleanup dp_clear_peer to be peer mac address based
from local peer id based.
Also, modify the API cdp_clear_peer with addition argument
for peer mac address.
Change-Id: I1bd3fab1b9510b5f1d4476e11b617fcb6417f2c4
CRs-Fixed: 2503774
This feature enables user to change HW mode dynamically
from DBS to DBS_SBS mode and vice-versa. Currently, HW
mode configuration is only possible through INI setting
requiring a subsequent reboot.
Relevant DP changes are:
1. Add API cdp_txrx_handle_pdev_status_change to pass
pdev 'up' or 'down' status to DP module
2. Add pdev-status check in dp_rx_process_invalid_peer
3. Add pdev-status check in dp_tx_comp_handler to free
buffer and release descriptor
Change-Id: I74b144abb1b0dc41a26a18ad28f872e6457e9653
CRs-fixed: 2490212
Tags are programmed using wlanconfig commands. Rx IPv4/v6
TCP/UDP packets matching a 5-tuple are tagged using HawkeyeV2 hardware.
Tags are populated in the skb->cb in the REO/exception/monitor data
path and sent to upper stack
CRs-Fixed: 2502311
Change-Id: I7c999e75fab43b6ecb6f9d9fd4b0351f0b9cfda8
1. Remove vlan tag in tx and enqueue to hardware.
2. Add vlan tag in rx after peer-vlan_id lookup.
Change-Id: I932202540ac03cabdd20ffd4849fe759ea8a7abb
Add code to remove void pointer usage for hif_handle
and use opaque pointer hif_opaque_softc and also use
cdp_soc for opaque DP soc handle
Change-Id: I2896f7704ffb809214c5b08756c4b8673307fd9e
CRs-Fixed: 2487247
Make change to remove usage of void pointers for
ctrl psoc in DP and instead use a opaque pointer
struct cdp_ctrl_objmgr_psoc.
Change-Id: I9fac21db1156378fc10b95cf10517afa4364da00
CRs-Fixed: 2484411
Add new CDP API cdp_register_rx_mic_error_ind_handler to
register rx mic error callback. Also, define new structure
cdp_rx_mic_err_info for holding MIC error information.
Change-Id: I4d5d6426b1d5f04848afd48f6dbf51edba291a20
CRs-Fixed: 2488424
Add feature flags DP_FLOW_CTL for DP flowctl ops,
DP_PEER_SUPPORT_OPS to support peer handling in DP,
DP_POWER_SAVE for power saving ops in DP, DP_CON_MON DP_MOB_DEFS
DP_INVALID_PEER_ASSERT DP_PRINT_NO_CONSOLE and DP_INTR_POLL_BOTH.
Change-Id: I01dafadf6578c0b5f36ab3ef56624912fb66b100
CRs-Fixed: 2467170
The channel number is always 0 from HAL RX PPDU TLV, then monitor
mode frames radiotap channel frequency is always 2407, get the
correct channel number that we saved when set monitor channel.
Change-Id: Ib927fe9aca3a4c1f98845fe37c9b1d37d1d6cf5a
CRs-Fixed: 2471161
Add callback to get the roaming status and do not honor addba
response Tx failure.
Change-Id: I148542fc3c629749fc08623f5041f6ca76fee298
CRs-Fixed: 2439721
qcacld-2.0 to qcacmn propagation
This change adds support for driver supported TCP
delayed ack to increase TCP RX performance in
third-party platform which don't support kernel
TCP delayed ack feature.
TCP delayed ack is dependent on count and timer
values. Whatever is achieved first will trigger
sending TCP ack.
This feature can be controlled through ini values.
gDriverDelAckTimerValue - timer value in ms
gDriverDelAckPktCount - delayed ack count
gDriverDelAckEnable - enable/disable feature
Change-Id: I8105bbb90965295b5a4aefeb00d344a90155974d
CRs-fixed: 2414231
Identify the WIN/MCC specific features. Move the features under feature
specific flags. Get rid of WIN/MCC specific code.
Change-Id: Iaf4e5befd7d574a20bea5c078201adbeac3b762c
Move WIN specific structures out of common datapath, WDI_ENUM
into common datapath and remove WIN specific header files inclusion
Change-Id: I8a0d9db4970f3ea9d966337caf178ebce55c28c5
With this feature, using appropriate commands, link layer, network layer,
transport layer and some of the application protocols can be tagged with
the user provided tag values for easier identification of protocols. The
supported protocols today are as follows.
ARP, DHCPv4, DHCPv6, DNS over TCP (v4), DNS over TCP (v6), DNS over UDP
(v4), DNS over UDP (v6), ICMPv4, ICMPv6, TCPv4, TCPv6, UDPv4,
UDPv6, IPv4, IPv6, EAP.
Receive packets are tagged by hardware. Tags are applied after the first
matching rule. Hence it is recommended that the rules are
programmed in such a way that tags are configured from application layer
to data link layer to get expected results.
Change-Id: Ibdc2bd2b78234f482074955e89fb93f05988eaca
FW assigns the pdev_id to lmac_id mapping for each platform(HK, CYP, etc).
This information is passed on to host via WMI_MAC_PHY_CAPABILITIES tlv.
Instead of hard-coding the mapping again in host, use the info sent by FW.
Change-Id: I01ad81e97a1b4aa1f0fea3951f6e8285a0f0c039
Refactor the code to move the serialization of
rx reorder queue setup wmi command to target-if
layer.
CRs-Fixed: 2431099
Change-Id: I6b383f5e875fec55c3586dfee576894f6eb35f73
Support WDI 3.0 SW path intra-bss forwarding. Major
difference for WDI 3.0 is the metadata info passed
from ipa driver in skb->cb[].
Previously intra-bss fwd decision is done by FW and
it passes fw_desc to IPA where IPA driver passes onto
WLAN driver. Now for WDI 3.0, FW is not involved in RX
path and SW path intra-bss fwd decision has to be done
in wlan driver.
Change-Id: Ibc2246620490905fd992a2df31cc6f241cc63592
CRs-Fixed: 2432831
Add a CDP function which processes the peer delete response
and deletes the static ast entry for the peer
Change-Id: Id646979ed07bd82609ca08e7ef3201382d07b1de
CRs-fixed: 2385115
Currently rx reorder queue setup command is sent from soft irq
context. There exists race condition between resume command sent
from worker thread context and this command sent from soft irq
context. In parallel execution on different cpu cores if the wmi
suspend flag is not sent to false as part of resume command at the
time of sending the rx reorder queue setup wmi command, the command
will not be sent. So serialize the rx reorder queue setup command
by posting to scheduler thread.
Change-Id: Ib4d0fb99df142be39d2d35e7f405130c0747efac
CRs-Fixed: 2410175
Delay counters per TID have been implemented for following types:
1. Linux stack to hw enqueue delay
2. HW enqueue delay to tx completion delay
3. TX interframe delay
4. RX interframe delay
5. RX frame delay from ring reap to networking stack
Change-Id: I836596cbd878a43955c18b4981cb5b7b43d4df5e
Add members in the ops framework and the respective
function definitions for supporting 8021pcos to tid mapping.
Change-Id: Iaa15efbda0824cecb1b2db67ea8b6ee585a8d56c
Add support for reset ast entry and table, also send
ast entry type to upper layers in delete callback
Change-Id: I6b420fba5bab50519e8954a1e796b04bc0768ef8
CRs-fixed: 2384550
When IPA using GSI instead of UC different IPA TX and RX
clients needs to be configured. In this change when IPA
uses GSI configure appropriate TX and RX clients/pipes.
Change-Id: I0302323d91f0cc4256a1b08ddbb1345d0daa2939
CRs-Fixed: 2368003
Add CDP APIs for:
a. To get/set rdk stats context into soc
b. To set rdk stats flag into soc
c. To flush rdk stats
Change-Id: I74e35f5fa244d6d38f46a4f64ebbad8a630589bd
Remove dedicated CDP API for mcastenhance 6 AST lookup and replace
the calls with generic APIs
Change-Id: Ic2c5613be57d7eaffc233ee601f136694f81f848
CRs-Fixed: 2369606
check for max_ast entries supported by FW and add the
entry on host accordingly.
Change-Id: Ief70ba631bb41d50c79d3673e3eea0c45b0c1e19
CRs-Fixed: 2355947
Currently there is not STA inactive time support for lithium.
Read inactive_time from htt_peer_stats_cmn_tlv by sending
HTT_DBG_EXT_STATS_PEER_INFO to firmware.
After sending command, wait on completion variable till
firmware to response, trigger completion upon firmware response.
CRs-Fixed: 2319219
Change-Id: I93e6343641ae5c72610a57dd6ba551cca0b010c1
Free the pending dp peers before cp peers in fw recovey case,
to make sure dp peers release all cp peer references they hold.
Change-Id: Ie6c7562e7214f40be895cf8a57a1aa6245d717cb
CRs-fixed: 2383984
Make sure the objmgr_peer is not deleted before
dp peer is deleted, which will avoid the access
of already freed objmgr_peer for connected sta peers.
Change-Id: Ib931dcd0c5650fea5284e9dd53dae9e41f662c56
CRs-Fixed: 2359645
