This is part of moving CFR component to hostcmn. Fix compilation
issues in this change.
Change-Id: Ia0a40da1e7e9201ffc5d1700cccea4181b358842
CRs-Fixed: 2637129
Changes to support Beacon protection. Additional key ix 6 and 7
support BIGTK. Update beacon template for Beacon protection support.
CRs-Fixed: 2632290
Change-Id: Ic37d17f5076bb28d2e1f2430da039cc8b9f759b6
Remove redundant data structure at wmi for vdev delete
response extraction, instead use mlme host data structure.
Change-Id: Iedb4280fb47d6567bc4d7b663ecd6af5e769ddfc
CRs-Fixed: 2641197
This will allow dbglog_cmd in non-tlv path
Since the fw_header structure "struct dbglog_config_msg_s" variable
"cfgvalid" increased size by one
Change-Id: I0ea9782895083b88250e9187e95456f57fa948b9
CRs-Fixed: 2626544
In function extract_roam_11kv_stats_tlv, the 11kv channels
tlv is read from the roam_neighbor_report_chan_info tlv if the
neighbor_report_channel_count in roam_neighbor_report_info tlv
is greater than 0. But in some cases, firmware sends value
in the roam_neighbor_report_info->neighbor_report_channel_count
but the roam_neighbor_report_chan_info tlv is not present.
Log error and return if
roam_neighbor_report_info->neighbor_report_channel_count is not
0 and roam_neighbor_report_chan_info tlv is null.
Change-Id: I7fa17d3afaf9d7e6736ad96c60bc5013197480f3
CRs-Fixed: 2644308
To undergo self recovery, the driver uses qdf_trigger_self_recovery to
initiate the sequence. Currently, this framework is valid for only a
single psoc driver.
Extend this framework to include support for multiple psoc driver by
providing the psoc on which the recovery has to be undertaken.
Change-Id: I782b505c03819223a914dabe7673b369aa175b7c
CRs-Fixed: 2617707
Remove redundant data structure at wmi for vdev delete all peer
response extraction, instead use mlme host data structure.
Change-Id: Ice91f55e0bf8a23ea1a639a74f6a8ac3b2779a7b
CRs-Fixed: 2641261
In struct weight_config, "oce_ap_tx_pwr_weightage" added newly.
Station uses "oce_ap_tx_pwr_weightage" as one of the parameter for
selecting AP candidate during initial connection. Host sends
"oce_ap_tx_pwr_weightage" ini value to firmware over WMI command
WMI_ROAM_AP_PROFILE.
Add oce_ap_tx_pwr_weightage in scan object scoring param to calculate
weightage based on AP tx power and select candidate accordingly.
Change-Id: I7f717e9cc398e8b9307f2f464f972b095c06364b
CRs-Fixed: 2647116
Currently QDF_MAX_NUM_CHAN and NUM_CHANNELS aren't aligned, this unalignment
may cause many potential OOB access. So replace QDF_MAX_NUM_CHAN with
NUM_CHANNELS to keep unified.
Change-Id: I7bf7829d776f7caf5b2afbd2c9fd0c20d608e630
CRs-Fixed: 2644073
Remove redundant data structure at wmi for vdev start
response extraction, instead use mlme host data structure.
Change-Id: Ie0d3e6fa0acb1fea8bc0f50095491dbe803f6810
CRs-Fixed: 2641085
WMI commands for DBR and CFR are based on pdev id, so need to convert
host pdev id and target pdev id when tx wmi commands or rx wmi events.
Change-Id: I54bf4a28a285e5b4dfdd125aeaabb9968a6d052a
CRs-Fixed: 2634729
The FW has updated the wmi command wmi_vdev_adfs_ch_cfg_cmd_fixed_param to
configure the Agile channel to enable the 165MHz channel as an Agile
channel by enabling 2 center frequencies.
For a 160MHz and 80MHz channel, the parameter center_freq1 will be the
center of the respective channels. For the 165MHz channel(restricted 80p80)
the parameter center_freq1 will be the center of the left 80MHz channel
(5690MHz) and the parameter center_freq2 will be the center of the right
80MHz channel (5775MHz)..
Update the ADFS parameters across UMAC, TARGET_IF and WMI layes to
update the Agile channel configuration command.
Change-Id: Ie480af9a6bb8dad87dd783ab06e17b449605b1c9
CRs-Fixed: 2642555
Sometimes if the user changes his location in the
connected state it may happen that the scan does not
happen and thus the AP cache channel map would not be
updated.
Now if partial scan happens due to a roaming trigger then
the candidate would not be found and thus would effect
roaming.
To avoid this set a full scan in roam invoke if the APs
are not found in the partial scan.
Change-Id: I2d2fd94760de78eaf495effc9caf8cca66c50ff6
CRs-Fixed: 2636431
Few NAN/NDP logs are redundant in the current logging infra.
Optimize the same and add few necessary logs.
Change-Id: I9621416f7c9b17fe62db32bea48d4de0122ce17e
CRs-Fixed: 2644420
When AP rejects assoc request based on poor rssi
host will put the AP in blacklist mgr list, only when
rssi value improves by threshold value,should the
STA try to connect to AP.
Change-Id: Ie40d29cbb63f337f8560c08290300f575c0e2b72
CRs-Fixed: 2632022
Enhance logs for PNO scan to remove duplicate
or unwanted prints and keep only useful logs to debug.
Change-Id: Ibe24714e925a00933911c801685528849e160480
CRs-Fixed: 2636641
Add support for WMI event to host to process
dynamically selected Muedca values and update
the mgmt frames with the new set of values.
Extract the params and store in Muedca_param
struct from control path, to be used for
updating mgmt frames.
Change-Id: I6cc7756d1a246ff994edef195f6191d280bc5c47
Currently information is printed in multiple lines that
can be represented in single line.
Change-Id: I7f53acaa4cabd1c970b06cdd82e0c462ffcdffe1
CRs-Fixed: 2617812
In the current implementation the wmi cmd flags to enable bcn rate
code n start req are not getting updated as the flag param is passed
to the API by value and not by reference.
Update the API argumets to pass the wmi cmd flag param by reference.
Change-Id: I8bca4ce78ce68f7b0d05af871641a86bf6622607
CRs-Fixed: 2633704
Per flag detect_enable to enable/disable detecting
interop issues ap function in firmware.
Change-Id: I52617e3700a3c79fc5b72c53af6d4b8db5e97879
CRs-Fixed: 2602001
From upper layers the vendor specific control roam bitmap is
converted to unified enum roam_trigger reason. From this bitmap,
deriver the fw trigger reason bitmap at
convert_control_roam_trigger_reason_bitmap.
Depreciate the roam_control_trigger_reason enum.
Change-Id: I64ac273d88b696c32c5b72462454a8983774ef90
CRs-Fixed: 2631968
Extend radiotap header to append ACK status and tx retry count
for packets sent to virtual mon interface.
Change-Id: I51037ffd11dfdee49278d43643fb7861a514ee18
CRs-Fixed: 2627710
Send new flag WMI_ROAM_OFFLOAD_FLAG_SAE_SAME_PMKID through
11i offload param to indicate fw whether WLAN_SAE_SINGLE_PMK
feature is enable or not.
If flag is set, fw should use single PMKID for SAE roaming
between VSIE AP(s), else fw should complete roaming by
doing full SAE authentication.
Change-Id: I9c88772c9571230c38e2cfa41c8a0c79663572ab
CRs-Fixed: 2616046
In a few scenarios, the number of reg rules can be 0. For example,
for a 2Ghz-only radio there are no 5Ghz reg rules. In such cases,
if we try to allocate memory (0 bytes) the allocation function prints
an error message. Also, the allocation is not required. Therefore, avoid
the allocation when the number of rules is zero.
Change-Id: Ic9caf578541970e9cf12cdde181f23762f137db8
CRs-Fixed: 2622109
Add support for the following NAN messages in kmsg:-
1. NAN enable status
2. NAN, NDP match events
3. NDP channel info.
etc.
Change-Id: I7f67b67153904b7efe8a708e3f93d069e399395c
CRs-Fixed: 2618433
WMI_WLAN_PROFILE commands support for tlv path.
Add WMI profile enable and trigger commands in tlv path
Change-Id: I10f867b181b559b82c097d6a61236f2145549238
For restricted 80+80 MHz FR, target team initially added
wmi_service_bw_165mhz_support to indicate the target is capable of
supporting restricted 80+80 MHz.
Later, they have added wmi_service_bw_restricted_80p80_support to indicate
the same. Therefore rename wmi_service_bw_165mhz_support as
wmi_service_bw_restricted_80p80_support.
Change-Id: I12229b5d35911d4c34e63902c09592187d902bed
CRs-Fixed: 2621249
Firmware advertises WMI_SERVICE_ROAM_SCAN_CHANNEL_LIST_TO_HOST_SUPPORT
at the time of initialization, that means host can querry for roam scan
channels list to firmware.
Host driver sends WMI_ROAM_GET_SCAN_CHANNEL_LIST_CMDID to firmware to
querry roam scan channels list and firmware responds with an event
WMI_ROAM_SCAN_CHANNEL_LIST_EVENTID.
Change-Id: I419a0206d7b06b6186d0c333c951bca5206f342f
CRs-Fixed: 2620607
1)Configurable number of bytes to log
2)Add support to record only specific WMI command/events
Separate buffers are added to save user specified WMI commands and events
1.To record specific wmi cmd, e.g. WMI_VDEV_START_REQUEST_CMDID
echo 0x5003 > /sys/kernel/debug/WMI_SOC0_PDEV0/filtered_wmi_cmds
2.To record specific wmi evt, e.g. WMI_MGMT_RX_EVENTID
echo 0x7001 > /sys/kernel/debug/WMI_SOC0_PDEV0/filtered_wmi_evts
Results of recorded specific WMI command/events:
1. WMI commands, e.g.:
cat /sys/kernel/debug/WMI_SOC0_PDEV0/wmi_filtered_command_log
2. WMI events, e.g.:
cat /sys/kernel/debug/WMI_SOC0_PDEV0/wmi_filtered_event_log
CRs-Fixed: 2597854
Change-Id: I1e90a13ac0717f1f37ba998fb1d06a990d3f4fa2
Currently while printing commnad information new
line is added which needs to be removed.
Change-Id: I639508a9a14db173f8d61d7a55c4ec99db4f1a1f
CRs-Fixed: 2618863
Currently there are unnecessary/duplicate logging. Identify and
reduce those logs that are not necessary.
Change-Id: If47a4fc0762a7a11666771e76a56d4fa1013647b
CRs-Fixed: 2615419
The candidate_min_roam_score_delta in struct
wmi_roam_cnd_scoring_param at the interface definition and this causes
compilation issues with older host.
Rename candidate_min_roam_score to fix compilation error.
Change-Id: Ie214b386ef4c14be2cdcaec9be0d8b6c7f1e7f33
CRs-Fixed: 2617981
This patch adds the function to extract and parse the wmi events
WMI_VDEV_AUDIO_SYNC_START_STOP_EVENTID and
WMI_VDEV_AUDIO_SYNC_Q_MASTER_SLAVE_OFFSET_EVENTID. These events are
required for ftm time sync feature.
Change-Id: Ib17da82b7a8abfcff5d18125a0ba0e5249d6bf54
CRs-Fixed: 2615452
A service bit is added to indicate Firmware supports sending NSS ratio
information to Host and Host receives the NSS ratio information from
Firmware as part of service ready ext event. Save this service bit in
soc's extcap feature bit. Extract the NSS ratio info from service ready
ext event and save the results in wlan_psoc_host_mac_phy_caps structure
to calculate NSS value.
Change-Id: I8fbee48d872b0724bbb629ad38b3c959736a3c39
CRs-Fixed: 2612959
Add support to send DSCP-to-UP map table values to
FW over WMI cmd to update its corresponding map table.
Change-Id: I92c1464881282ead00714d0b115cffd34dc9ba1f
CRs-Fixed: 2617045
