qcacld-2.0 to qcacld-3.0 propagation
Before this change the ACS calc process only consider the
channel's rssi and bss count in this channel, in this change
add noise floor, channel free statistics and tx power in the
ACS calc process.
Change-Id: I654e53fa2441e03723f150d973c124985c67f2b4
CRs-fixed: 1050316
Currently wma_register_roaming_callbacks() has a cds_ctx parameter. At
one time this was necessary since the global context was required to
get the module-specific context. However the global context is no
longer required for this purpose, so remove the unused parameter.
Change-Id: Ida681fb20dd98a46f385f1e04662f72a334c68bf
CRs-Fixed: 2103626
Currently wma_get_wcnss_software_version() takes a p_cds_gctx
parameter which it does not use, so remove it.
Change-Id: I86a5893a9407bad034a32c105aec92d4e6054744
CRs-Fixed: 2102549
qcacld-2.0 to qcacld-3.0 propagation
FW has limitation to support old WMI_REQUEST_STATS_CMDID and
WMI_UPDATE_STATS_EVENTID interface on AP vDev. FW suggest to use new
WMI_REQUEST_PEER_STATS_INFO_CMDID and WMI_PEER_STATS_INFO_EVENTID to
get tx/rx rate.
This checkin is about HDD layer, provide APIs/callbacks to upper layer
to query rssi/tx/rx statistics of peer station associated with SAP,
and provide a default disabled ini setting and checking FW's
WMI_SERVICE_PEER_STATS_INFO capability to control this get peer info
interface. Add/change iwpriv/QCA_NL80211_VENDOR_SUBCMD_GET_STATION/
cfg80211_ops.get_station interfaces to upper layer.
Change-Id: Ib1571219faa16e3bc8c3eb1260137ae08b8b6016
CRs-Fixed: 2059507
If a OCE AP is found in previous scan cache in fw, fw need to defer
sending probe for sometime to check for broadcast probe response
from OCE AP.
Send the probe deferral time and the time gaps between the two probes
from host for STA vdev.
Change-Id: I973fc1e2ea43950bd4e2168083644a240a298c22
CRs-Fixed: 2068490
WMA layer needs to use host defined target params as
direct access of wmi target definition is not allowed.
Use host defined wmm params in wma layer.
Change-Id: I8af9c7802c20ce88a6fa158db5acab018807506e
CRs-Fixed: 2072166
As beacon and probe rsp are not deferred in LIM the non-deferable
LIM msgs from WMA may get delayed due to processing of beacons and
probe responses.
To Avoid this post the non-deferable LIM msg from WMA with
high priority so that they can be processed before beacons and probes.
Change-Id: Ida7cb86be397a415893142a318b75b41c13578b5
CRs-Fixed: 2090173
Remove the channel avoid event processing in wma as the
event processing handled by regulatory component
Change-Id: Ifa0e340c6341b21c192066c8c6eb14418b041062
CRs-Fixed: 2080241
Currently, a wakelock is acquired before vdev start is sent to firmware
and released after a vdev stop response is received. In some cases, this
can cause a race condition where the device will power collapse before
the association process is complete. Instead, release the wakelock after
either vdev up or vdev down is sent to firmware, ensuring the entire
association process is protected.
Change-Id: Iab1a241f1c5810d9f71bfd86e1e8036847ebf602
CRs-Fixed: 2082928
Currently there is no support to configure SMPS parameter
from host, add support to configure SMPS parameters using ini.
Change-Id: I6f8273ffed39a0b95c31f1647e86406b870165f2
CRs-Fixed: 2080571
warning: implicit conversion from enumeration type 'tDriverType'
to different enumeration type 'enum driver_type' [-Wenum-conversion].
Move enum driver_type to QDF.
Change-Id: Ic89e4ee512a2d70c27324446257286aaafd49839
CRs-Fixed: 2055487
Link stats memory is not freed in case of driver
unload happens before more results is received
from firmware.
Fix is to free link stats memory on wma close.
Change-Id: I3c54a0bc4951c70b2ca7116e37e0b62a5c6b7a2f
CRs-Fixed: 2083603
Currently, a hard-coded enhanced multicast filter configuration is being
sent to firmware. Instead, create a set of enable/disable APIs, and
configure enhanced multicast filter based on advertised firmware
capability.
Change-Id: I488b4a921612e1081266be8831be098d755375f9
CRs-Fixed: 2078615
In the suspend path, the code waits for all active/pending scans to be
cancelled before continuing the suspend. Instead, for better power
savings, abort all active/pending scans during suspend and immediately
continue the suspend process.
Change-Id: I16a5429c00034fe58fb4c70a8dacda666ac54227
CRs-Fixed: 2073229
If channel switch is in progress and if the HT IE received in
beacon has the BW change then do not send the bandwidth update
request to FW. After the channel switch response is received and
beacon has different BW bandwidth a new BW update request will
be sent to FW.
Change-Id: Id41bd0523f821d2b81e132318230492fda79f32a
CRs-Fixed: 2068906
Add handler for the new WMI BT activity event and propagate the BT
event till HDD. These BT activity events will be used for MBO
enhancements to decide whether to accept the BTM request from
AP or not.
Change-Id: I687819fd28c693964b42bfb24eb9dae1858b10a5
CRs-Fixed: 2023728
Fix implicit conversion from type 'enum driver_type' to different
enumeration type 't_wma_drv_type'
Remove duplicate data structure
Change-Id: Iccf1bed796c0a67109788ce434ab9115b378dd43
CRs-Fixed: 2063149
qcacld-2.0 to qcacld-3.0 propagation
Host driver can send number of max AMSDUs in transmit frames.
Added a call to process_wma_set_command() similar to CLI
command processing for GEN_VDEV_PARAM_AMSDU during device
initialization.
Changed name of the field from isAmsduSupportInAMPDU to max_amsdu_num
in several places. Existing SME and LIM code passes this parameter
to WMA, but it is not used there. It may be useful if AMSDU setting
is changed to per-vdev basis in future.
WCNSS_qcom_cfg.ini changes:
Removed - "gAmsduSupportInAMPDU"
Added - Name = "gMaxAmsduNum", Min = 0, Max = 3, Default = 1
Actual function call to ol_txrx_aggr_cfg() send the parameters to
firmware is commented out because it is not implemented in firmware.
Change-Id: I2dfdd8c8c4a8807596ff28eee192ef66ac425653
CRs-Fixed: 871686
qcacld-2.0 to qcacld-3.0 propagation
FW has limitation to support old WMI_REQUEST_STATS_CMDID and
WMI_UPDATE_STATS_EVENTID interface on AP vDev. FW suggest to use new
WMI_REQUEST_PEER_STATS_INFO_CMDID and WMI_PEER_STATS_INFO_EVENTID to
get tx/rx rate.
This checkin is about WMA layer which process SME message to get peer
stats info and WMI event WMI_PEER_STATS_INFO_EVENTID which send from
firmware as response to WMI_REQUEST_PEER_STATS_INFO_CMDID. There are
also updates using old WMI_REQUEST_STATS_CMDID to get peer stats.
Change-Id: I964520dc44c112875434771154f55f4746298308
CRs-Fixed: 2046459
Firmware reports SNR and RSSI in int32 variable due to restriction
of WMI, however host uses int8 for these. This is causing RSSI or
SNR value to be altered when typecasted. Fix range change for SNR
and RSSI at WMA and ensure it fits int8 before passing to UMAC.
Change-Id: Idc3c4f48bb1212b5f10104843960d1a509403456
CRs-Fixed: 2042747
For a small window during roaming and new connection, there is a
possibility of firmware to send the invalid rssi value(other than
0-127), leading driver to send the same invalid rssi value to upper-layer.
To mitigate this issue:
1) Either send previous valid rssi value to upper-layer on receiving invalid
rssi value from the firmware.
2) Or if previous rssi value is not valid, fetch rssi value from beacon frame
of connected AP from scan cache.
Change-Id: I4443ed06cd80826ff386c2b4a536a2dc1a1e0881
CRs-Fixed: 2042747
Currently, for world regd and some other regds where conformance test
limit is NO_CTL, host is sending invalid CTL info to fw instead of
NO_CTL (0xff) due to type conversion issues.
To fix this, use proper unsigned type for CTL info.
Change-Id: I6aff04f0142b5c8e4ff2ea91d85ae7108390c89f
CRs-Fixed: 2056834
Currently, Host uses single wow_wake-lock for all wow
wakeup events like (auth/assoc/deauth/disassoc etc)
which raise difficulty to detect what is actual cause of
holding wake lock.
As a part of this fix, Add separate multiple wake locks
to remove wake lock overloading.
Change-Id: Iac0a6f73ac05dd3960a4ea0229190cb851808e16
CRs-Fixed: 2046511
Fix vdev_id validation at wma. Currently validation for vdev_id
which is an index to wma->interface array is off by 1.
Change-Id: I01fa048af08f76244896ae1ca4c53c61c1c60397
CRs-Fixed: 2057505
In case on continuous Tx failure of management packets, logs
flooding can cause watchdog timeout.
Add changes to reduce log dumping in case of transmission
failure and log every 50th packet failure
Change-Id: Ia975fb71fcd14eb6abd8c0712d9d0704d592f97b
CRs-Fixed: 2040917
Add host support for detecting SOC power collapse failures in FW and
communicating the same to framework.
Change-Id: Icee39c896802c4d7136e0b8ef442a33feeb4799c
CRs-Fixed: 1112979
qcacld-2.0 to qcacld-3.0 propagation
By setting the corresponding parameters: reorder timeout and window size
to FW, the host will deliver information about aggregation of the packets
on RX to upper layer.
Change-Id: I404d56d8d9ca3e90f8d1dee28abd80d784924901
CRs-fixed: 1078111
Add support to read link layer stats via debugfs. This change set
will issue get_req and store the received stats response is debugfs
entry.
Change-Id: If3af9f0a37283583ff011e35c7275a329a6e175d
CRs-Fixed: 2018087
In case user space disconnects, directly send ROAM_SCAN_OFFLOAD_STOP to FW
to avoid delays in queues.
Change-Id: Ia6e458617818da5ad2e956cd30a203652949db21
CRs-Fixed: 2035160
Beacons from NAN devices triggering crash in framework.
Don't update the NL with the NAN device beacons.
Drop NAN device beacons in WMA before processed by PE.
Change-Id: I754591459d7a02848454d506b85847b1993aac53
CRs-Fixed: 2047525
Vdev restart cmd is sent in vdev stop response handler during the
hidden ssid restart process. Lim sends beacon template cmd after it
sends the hidden ssid restart cmd so beacon template is sent to FW
after the vdev stop cmd and before the vdev restart cmd as vdev
restart is sent during vdev stop response handler.
Send the beacon template after vdev restart is successful during
the hidden ssid restart process.
Change-Id: Ia75bde4ce8c564133e2b2a7bd4011089e52808e7
CRs-Fixed: 2039224
If CSA offload is enabled, FW send the CSA offload event for
the channel switch, so ignore the CSA IE check in beacon and
probe response frame processing.
Change-Id: I3f0d204317a4d26dc503c350307f4c144bf8672d
CRs-Fixed: 2060145
Host should keep the wake lock from the time it sends set hw mode request to FW
till it receives the set hw mode response. This will avoid any fatal
crash condition.
Change-Id: I6ab1020811100be1adbb70b90a06285dc8bed88c
CRs-Fixed: 2060010
Currently IPA stats command request gets scheduled at every
100ms and posts message to WMA queue which can cause MC
thread to prioritize these request messages over other
messages in pe queue. This can cause delayed processing of
association related messages in pe queue in noisy environement.
To avoid this serialize IPA stats cmd to lower priority SME queue.
Change-Id: I1f8257b869dacd65a61e52e34f001ee24c108c4a
CRs-Fixed: 2040579
If firmware supports CSN[Compressed Steering Number of Beamformer Antennas
] 8x8 and if the concerned INI(i.e. gTxBFCsnValue) is set above 3 which is
default fw support currently, send Probe/Assoc Request with CSN in VHT caps
as set in INI. Else set CSN to 3.
CSN of Beamformer Antenna in VHT caps is one less than the max number of
space time streams that the STA can receive in VHT NDP(i.e. CSN in VHT caps
= max space time streams STA can receive - 1)
Change-Id: I6c77f7513ee090beba8849b27c90ac0346e1ac58
CRs-Fixed: 2052348
Add INI params for 11AX HE OBSS_PD. Update code to set
these params on BSS start on station connection and SAP start.
Change-Id: I60ae2cae936558668dfb1059744a6e3891aaebd1
CRs-fixed: 2045431
Propagation from cld3.0-1.1 to cld3.0-2.0
Firmware sends a value of 0x127 or -1 to represent
an invalid SNR to the host. Handle it in the host
for both the values
Change-Id: I374c626566cd5b7d67aaca43167f9fe4bd4b85a2
CRs-Fixed: 1105132
In case of join failure during auth and assoc phase scenario
join response is sent to umac before peer delete response is
received from firmware.
Defer the join response till the peer delete response
is received from firmware.
Change-Id: I380b969d76f4b86508c0523bf7879d8504a5f207
CRs-Fixed: 2036890
In failure scenario join response sent to umac before
peer delete response is received from firmware.
Defer the join response till the peer delete response
is received from firmware.
Change-Id: Icac97e0ed0e374bdd7f7d50e357af8f88b519f4d
CRs-Fixed: 2030841
Add PMO changes to configure and clear default packet filters
over suspend and resume.
Change-Id: Icd0acdbb58bebb5726a4213b13db59fe083835a5
CRs-Fixed: 2034398
If AP changes its color code for 11AX mode then it will announce
through bss color change IE. Connected STA needs to honor that IE
and update its internal table.
Along with color change IE, he ops can also be changed by AP.
STA needs to honor that as well.
CRs-Fixed: 2039284
Change-Id: I4f6767d0a6a814f56448dc6d647e045c852e2750
Add support for handling BSS color collision and select new BSS
color. Update beacon template and set new BSS color to FW.
Change-Id: If441990916753bdcf4daaded031e16f0460a0e8f
CRs-Fixed: 2039284
This is qcacld-2.0 to qcacld-3.0 propagation.
This patch adds ini support for WMI_VDEV_PARAM_DISCONNECT_TH
which represents number of dropped packets before FW sends out
kickout event for that peer to host.
Change-Id: I4c82bd1b5d1bc5d8265e3b0e5e58c82cdcab7f50
CRs-Fixed: 862686
Currently, Host serialize get link speed command through
MC thread which is truly not required.Hence removing
serialization for get link speed cmd.
Change-Id: Ia2895394025056d4957856bb9bde0350b55d25ca
CRs-Fixed: 2042492
wma_wow_wakeup_host_event is a large monolithic function with many
responsibilities. Break this function up into smaller pieces for each
of those responsibilities to make moving this logic to the component
model easier.
Change-Id: I5583aad21280a6fbf97c7634c9c9763be61fedc3
CRs-Fixed: 2038488
