In function send_roam_scan_offload_mode_cmd_tlv, assign qos_qnabled
parameter being sent to firmware. Otherwise firmware will not be able
to get correct qos_caps value.
Change-Id: I3bdf43594f68cb0780f2947fff9db723644b5dac
CRs-Fixed: 1092258
The term "agile" is used by hardware for swift/fast channel change.
Use precac for the zeroCACDFS instead.
Change-Id: I35f4d61cc93b3542feb8b286cbdf3a4474df5a75
Crs-fixed: 1073945
A new iwpriv command has been added to configure the period
and wlan duration for a btcoex duty cycle.
As a part of this registring the wmi_service_btcoex_duty_cycle
for WMI_SERVICE_BTCOEX_DUTY_CYCLE.
Also send_btcoex_wlan_priority_cmd registrtaion for btcoex
duty cycle command in non_tlv_ops.
Change-Id: I7f3bfdfd9804566d6d0b7cce7025e99db57d0e23
Acked-by: Basamma Yakkanahalli <ybasamma@qti.qualcomm.com>
CRs-Fixed: 1064437
Agile flag WMI_CHAN_FLAG_AGILE_MODE added. When this flag is set,
the primary VHT80 will not be affected when channel change is done.
Change-Id: Ie6bce12ec955c0c8a79246dda57092808611803d
CRs-Fixed: 1072504
For WOW Enable, firmware accepts a bitmap of flags, but passing them
to firmware is not exposed by WMI. Modify WMI to allow passing WOW
Enable flags to firmware.
Change-Id: I458b01bc6a4e5b14b2a1dfee928136daeb70ebe9
CRs-Fixed: 1092068
Include TLV helper header file to fix implict function decration warning
treated as error. These APIs are required only for TLV target, hence
put it under TLV compilation flag.
Change-Id: I50f3629b3f69c3cdb46e2384e47d2559c803cd4c
CRs-Fixed: 1090087
We want to enable the compiler's -Wmissing-prototypes switch, but
there is existing code that is generating warnings. Fix all warnings
in wmi.
Change-Id: I2452ffa4e9fa1de8a7bd75d04dd4a0f94d7cf55c
CRs-Fixed: 1093298
Using a buffer after passing it to wmi_unified_cmd_send() induces a
race condition that may result in a use-after-freed situation. Fix
several potential use-after-freed situations when calling
wmi_unified_cmd_send() by ensuring all access to a buffer is done
before the call to wmi_unified_cmd_send().
Change-Id: I985aad6e49daf1d823e3751a9cb0a293a298323c
CRs-Fixed: 1089713
Add helper routines to extract TLV params in WMI EXT service ready
event. These helper routines abstracts all TLV related information
providing APIs to extract ext serivce ready params.
Change-Id: Ic989331856ed2f9376965bdec4b658328f9e470b
CRs-Fixed: 1079237
qcacld-2.0 to qcacmn propagation
To debug the fwr stuck issue as early as possibile,
reduce the wmi max pending command threshold to 256
from 1024.
Change-Id: Ic3cbe26cca979dcaa68fca03e6fe1af397cf0c4f
CRs-FIXED: 1080761
Add only wmi_roam_scan_mode_fixed_param TLV for ROAM_SCAN_MODE disable
command[i.e. mode is set with WMI_ROAM_SCAN_MODE_NONE |
WMI_ROAM_SCAN_MODE_ROAMOFFLOAD]. This is to retain the scan params
[n_probes, dwell time] so that it can be used if ROAM_INVOKE command
follows ROAM_SCAN_MODE disable.
Change-Id: Iafe31850872cac3eaff35eeb57ab271b4409ef18
CRs-Fixed: 1084912
Analysis: strict passive scan is not working as the scan_ctrl_flags
check is missed when strict passive scan enabled
Change-Details : Added a support in ol_ath_scan_start_send() and
send_scan_start_cmd_non_tlv() to update the scan_ctrl_flags with
WMI_SCAN_FLAG_STRICT_PASSIVE_ON_PCHN when strict_pscan_enabled
Change-Id: If6713e340841d4947ef9042421dabec35f7bfbae
CRs-fixed: 1069383
For Beeliner family of chipsets, the number of values expected is 688
for 2G and 1540 for 5G
Change-Id: I2c47ed98f639c09453687fce7f713946304a7036
CRs-fixed: 1071083
WMI command buffer is not cleared after WMI command TX completion.
For DISA certification TK and GTK should not remain in the memory
area after disconnection. Since WMI command buffer is not cleared,
hence content of TK and GTK is still in host memory region.
Clear WMI cmd buffer after TX completion.
Propagation from qcacld-2.0 to qcacmn.
Change-Id: Ib09a77b630c932409645b7a989bd959f0ed4f514
CRs-Fixed: 1060982
Log Transport Layer Tag for debugging. The tag differs for
normal command and the runtime pm commands.
CRs-Fixed: 1072520
Change-Id: I7ec085410aaa429cfeb8cc09729e62deee9c7d95
Recently added changes for coexistence of WIN/MCL TLV implementation
through CL I6868c288a43fd3afb19c84b8a9d4ef0dfbee5c94 require
adaptations in QCA WIN driver to successfully compile.
Add required definitions in WMI layer to adapt WIN driver to
changes made for coexistence.
Change-Id: I99550ca10553d8096b8967249c006bac4e0c62df
Currently, RTT related operations to change report type and number
of measurements are done in the WMI layer.
Abstract these operations out of WMI layer and keep it in the WIN
host API layer to make the RTT WMI API generic.
Change-Id: I9b73830912c6c2b3d0908788f1f6a77b7f43dcaa
TxRx chainmask is populated by the FW only in the case when report
type is WMI_RTT_REPORT_CFR.
Populate txrx chainmask to 0 when RTT report type is non-CFR to avoid
corruption.
Change-Id: Ie728656efe2f608e90a15b6fc94be3159db0f635
CRs-Fixed: 1080686
LOWI messages to register, set capability
and send RTT measurement request are not sent assuming only
LCI and LCR messages are sent out to the FW using ol_ath_lowi_data_req_to_fw.
Add code to send messages other than LCI and LCR through the API in
ol_if_lowi.c when msg subtype is not one of LCI or LCR.
Change-Id: I2deedaa6e03e769bf802337b2ec93d9573eb1b5a
CRs-Fixed: 1079169
The packet is allocated in wmi_unified_cmd_send so if it doesn't
get sent or added to a queue it needs to be freed.
Change-Id: I763824812d3c0510c53a70caf063568385b9bfc2
CRs-Fixed: 1079509
WMI_RECORDING:Fix implementation of WMI_MGMT_COMMAND_RECORD to
be compatible to WIN.
Current implemantation uses variables not applicable to
WIN.
CRs-Fixed: 1067944
Change-Id: I65b2415e40bd888d3b94ef5f04ec6d53b4d50da2
qcacld-2.0 to qcacmn propagation
Make the following enhancements to the EPNO feature:
1) Implement the reset EPNO command handler
2) Add new parameters for candidate score calculation.
Change-Id: Iad1ff9c2b003c9e3ddbc3373366686040ccb55ca
CRs-Fixed: 1075380
Extraction API for phy error event handling does not populate single phyerr
RSSI info for DFS radar event, but was populating the value in case of
spectral event. Single phyerr RSSI info is required for both DFS and Spectral
operations. As a result of this change, single phyerr RSSI info is updated
on receiving DFS event as well.
Change-Id: Idca3e4075e1869eda0d200a102e2ca2b7d33bf70
CRs-Fixed: 1076872
qcacld-2.0 to qcacmn propagation
gscan priority should not cross normal scan.
Add changes to reduce gscan priority.
CRs-Fixed: 1066785
Change-Id: I7459367cfed5d932f07f8c846265c448b9a84555
Propagation from qcacld-2.0 to qcacld-3.0
Some of the logs are printing quite often and spamming the kernel logs.
Hence move them to appropriate log levels and remove the useless debug
messages.
Change-Id: If38d7a6a3cf13a5879f6a628d3d7eb4f5156a95b
CRs-Fixed: 1001441
A_OK status is deprecated. Use QDF_STATUS_SUCCESS. Needed since
wmi_unified_cmd_send returns QDF_STATUS not A_STATUS.
see change: Ib9b0a60976dedcf8fcd4184083a9948892791621
Change-Id: I91209002c0a84a8353541c84cdc2e49ffdcc6654
CRs-Fixed: 1072077
If param->len was 0, ret would be returned without being initialized.
param->len of 0 is unexpected, so return an error.
Change-Id: Ib9b0a60976dedcf8fcd4184083a9948892791621
CRs-Fixed: 1072077
Green AP feature for WIN allows the AP to go into power save mode
and leads to only a single chain being active.
In the current code, it is seen that the WMI API for enabling Green
AP feature is under "FEATURE_GREEN_AP" flag that is not defined for
WIN. This leads to trigger of dummy API that does no operation.
Replace "FEATURE_GREEN_AP" with proper flag "ATH_SUPPORT_GREEN_AP"
defined on WIN to enable Green AP feature.
Change-Id: I344e74c3753f1ef3b6d5d5a2bb1086c84f2ab84c
CRs-Fixed: 1074036
Add TLV changes to pass DISA parameters received from
WMA and pass them to firmware for firmware
to encrypt data and send back to driver.
Change-Id: Ic6928a93f799c47518fbbad96564062f595287dd
CRs-Fixed: 1072545
On issuing iwpriv wifiX dl_loglevel <Val> command, there is a NULL pointer
dereference crash observed. It is root caused due to improper reference
to module_id_bitmap field, that needs to be corrected.
Change-Id: I59ff4455c74452bb00caff125f84213a2e9d7742
CRs-Fixed: 1066323
Fix following issues in wmi_unified_non_tlv.c file
->Move allocation of WMI buffer in FIPS WMI cmd
->Change dummymask variable to static in mcast_group_update cmd
Change-Id: I0a0d0e68820905ad543175abed1a812639b3dbf1
CRs-Fixed: 1069863
For big endian based offload radios, key installed using
WMI_VDEV_INSTALL_KEY_CMDID requires to be code swapped as the copy engine
for big endian platform does byte swap operation on the received key before
sending it down to FW.
It is observed that the big endian conversion is carried out in WIN Wi-Fi driver
for big endian platform specific radios in the driver, that takes care of
converting the key data to the byte swapped form. However, it is observed
that an additional copy is carried out in the WMI layer that is overwriting
the converted key with old key, in the non-swapped form.
We move the byte swapping operation to the converged component and do a single
memory copy using the macro that carries out its operation based on big or
little endian platform.
Change-Id: Ic6b7cc667d0f505d1d1daeacec72f54d41554038
CRs-Fixed: 1067206
Extraction API for phy error event handling does not populate composite
RSSI info for DFS radar event, but was populating the value in case of
spectral event. Composite RSSI info is required for both DFS and Spectral
operations. As a result of this change, composite RSSI info is updated
on receiving DFS event as well.
Change-Id: Ia77779251ccf230f7ca4242ee0851790305d2fbc
CRs-Fixed: 1066136
qcacld-2.0 to qcacld-3.0 propagation
Enable firmware to send WMI_EXTSCAN_CYCLE_STARTED_EVENT and
WMI_EXTSCAN_CYCLE_COMPLETED_EVENT instead of
WMI_EXTSCAN_BUCKET_COMPLETED_EVENT as per Android N requirements.
This change is required to complete the propagation of
earlier change I399204261fa3d8515146c590630a3bb663ee801c
CRs-Fixed: 1062739
Change-Id: I5c801912828844aa3d8e2aa4f022cb184aa771c4
Non-TLV registrations for atf_peer, atf_group and lcr WMI command were
missed out during the WMI convergence implementation. This change adds
the missed out registrations.
Change-Id: I384c27709e088c06ee73f17b7dc1a52bb5c63370
CRs-Fixed: 1069863
PEER assoc command failed in the tlv validation check.
Tlv length sent in the TLV header is different from
the length used to fill the tlv buffer which caused
failure at tlv validation.
Modified code to use the aligned length while
filling the tlv buffer.
Change-Id: I9ad2009315dd3cf37308ef44360d566035344950
CRs-Fixed: 1069008
qcacld-2.0 to qcacmn propagation
As Current WMI interface need both the ARP/NS configuration
in single command. To support active offload host need to
cache the ARP/NS at wma layer so host can fill the other
request and configure down to firmware complete request
(ARP+NS).
Change-Id: Ie0a57d216379817ff0ae48f4f582c9108e8ecca1
CRs-Fixed: 1067683
These fixes are made during qca8074 VP control path bringup.
Add fixes in tlv.c and enable TLV helper routines for WIN.
Fixed some inconsistencies in wmi API params by adding compiler flags.
This needs to be cleaned up so that API and params have common interface
between WIN and MCL.
Change-Id: I0821daa58df86ad0b394a7846a982a9e3577cd14
CRs-Fixed: 1063252
Address compilation issues for WIN with new Lithium Firmware headers.
Also removed dependency on htt.h from header files, which may need to
add explicit dependency on htt.h in .c files.
Change-Id: Ia5027963837e645bc3f81a3db98c2ea06789aea8
CRs-Fixed: 1061096
Propagation from qcacld-2.0 to qcacmn.
Add support to get per chain rssi from fw through the
already existing WMI command WMI_REQUEST_STATS_CMDID
and then store it in the station_info structure defined
by cfg80211.
Change-Id: Id50c96dd322b5ca4db34cf2df901730d8b103251
CRs-Fixed: 1005367
Send HT/VHT CAPs IE to firmware per band. This will allow certain
features like LDPC to be configured per band.
Change-Id: I21c83af984f9be3ade46121ef148b52568c3ad0f
CRs-Fixed: 1059454
qcacld-2.0 to qcacmn propagation
In some cases wmi_buf_alloc is used to allocate memory, while
adf_os_mem_free(vos_mem_free) is used to free the memory.
vos_mem_free checks if memory is present in vosMemList to detect
double free.
Now as wmi_buf_alloc doesnot add the allocated memory to
vosMemList, vos_mem_free assume it to be double free case and cause
kernel panic.
Use proper corresponding API to free memory
Change-Id: I3602887d2bfdb407e5805aedd7a97a57440a4567
CRs-Fixed: 1004079
