In lithium a peer will have only single peer_id hence remove
peer_ids array from dp_peer structure
Change-Id: Ib98270b7fd98f1199b862e4608f990687914b7cc
dp_srng_setup was split into dp_srng_alloc and
dp_srng_init as part of lithium DP init and de
init improvements but the debug prints remain
unchanged
Rectify mistakes in debug prints accordingly
to match dp_srng_alloc or dp_srng_init
CRs-Fixed: 2696952
Change-Id: If6c41ffe80006852f9ac308ce65ceee69736fcb9
Currently computation of Rx rate depends on SU MCS
and SU NSS for SU PPDU. For SU PPDU, incorrect SU NSS leads to
incorrect computation of Rx rate.
To fix this, use respective PPDU information(MCS and NSS) and
calculate Rx rate based on proper SU NSS.
Change-Id: I754a7ecd57ec02d33f211937b7ffd025278d1e05
CRs-Fixed: 2668760
For AC based TX flow control, when try to do TX desc pool
reattach, currently even if TX desc pool avail_desc count
> BE_BK start threshold, it still mark pool status as
FLOW_POOL_ACTIVE_PAUSED.
Set correct pool status to FLOW_POOL_ACTIVE_UNPAUSED.
Change-Id: I6b675ffd71a2233ac23efbd6df2c235313f59cba
CRs-Fixed: 2687728
Make the monitor ring low threshold to half of that of
MON_BUF_MIN_ENTRIES. This is needed so that spurious interrupts
because of reaching low threshold is avoided.
Change-Id: Idfc5dda2e96ad69bf35c3ab4f5cf81931104504e
Currently when the last tx descriptor in any descriptor
pool is freed, it will also free that particular tx
descriptor pool. But before freeing the tx descriptor
pool, the pool is not marked as inactive.
Due to this, the next time when the tx descriptor pool
is tried to be allocated, since its not inactive, the same
pool is reattached, but without any memory allocated.
Deinitialize the tx desc pool before freeing it, to make
sure that the tx descriptor pool status is marked as
inactive when the decriptor pool memory is freed.
Change-Id: I52d792d115d215561c72f203abef6d327d126c01
CRs-Fixed: 2680397
Tx desc flow pool for the vdev is not deleted as part
of disconnection due to tx_desc pending to be processed
in tx comp ring. Hdd_stop is triggered immediately after
this causing dp vdev detach. In parallel, the tx desc
from the tx comp ring is processed, wherein stale vdev
address is derefernced to get dp soc causing page fault.
Fix is to reset tx desc by setting the vdev to NULL as
part of dp_tx_delete_flow_pool and also reset count to
zero in dp_tx_comp_handler before ring desc process loop.
Change-Id: I66f718668ba84f89106d09e624d9593f89479e55
CRs-Fixed: 2683874
In dp_vdev_detach_wifi3(), the vdev_id_map[vdev_id] set to
null is happened before dp_rx_vdev_detach(). but the call back
done by dp_rx_vdev_detach still need to get the vdev pointer by
vdev_id, it will return NULL by current logic.
Move vdev_id_map[vdev_id] null setting after dp_rx_vdev_detach().
Change-Id: Ibaf506cfef83d68a21033e67395c37f53aeb4489
CRs-Fixed: 2681712
FISA RX aggregation is not necessary for non-regular RX delivery
as it requires extra FISA flush and also may impact regular
dp_rx_process() RX FISA aggregation.
Add exception frame flag for non-regular RX delivery, so that
FISA path can identify this frame and bypass FISA RX.
Change-Id: Ic06cb72b516221754b124a673ab6c4f392947897
CRs-Fixed: 2680255
Add debug info support for rx descriptors to log
the caller func name and timestamp in replenish
and free scenario.
Change-Id: I1d9b855d14f705094f241bae653f33a94d0e39b7
CRs-Fixed: 2677288
Added support to configure TSO and REO descriptors as part
of new datapath init-deint enhancement for ipq5018 target.
Change-Id: Ic6878dafa99cb09d6e45cf2d69de76cac0fe35c1
Soc level exception descriptors limit is sent from FW in WMI service
ready TLV. Using that to check for exception packets limit
Change-Id: I99d20ecbb6a5bfd61b5a8a205775d34749eae880
In dp_peer_teardown avoid setting the delete in progress
flag only for AP bss peer
For STA bss peer as CP always allocated new peer for peer_create
set delete in progress in teardown
Change-Id: Id769678895a0953e731ce040399af7bddd4c373d
With the init/de-init FR we set the minimum buffers
needed in monitor buffer ring to be 8, because the low
threshold by FW is set to 32 the MPDU TLVs are not DMA'd
to monitor status ring, this resulted in NAC feature
regressed. hence changing it from 8 to 64
Change-Id: Id39dce59686b7416bdc6156798ff7f948dff8da6
CRs-Fixed: 2683633
Move the ppdu_user_desc assignments in all tx capture
before peer checks. FW sends the peer_id which is not
valid in host, so this check is needed to not
miss the sequence number in this scenario.
Change-Id: I24305ae8f8f1964157ca61b8687fe72e76cde5ca
CRs-Fixed: 2626247
In case of driver unload, there can be a race condition
since the timer for processing monitor status ring can run
in parallel to the unload time wow ack response handler,
which is also flushing all the monitor status ring entries.
To avoid this race condition, stop the monitor reap timer
as a part of target suspend, and process all the outstanding
entries in the montior status ring.
This will make sure that the monitor status ring is
processed from only one context at any given time.
Change-Id: If61327c73fdddc414b3957b69ae986f2a26bb803
CRs-Fixed: 2677812
Suspicious dereference of pointer 'pdev' by passing argument
to function 'dp_find_peer_by_addr' in dp_register_peer.
Add NULL check before dereference of pointer 'pdev'.
Change-Id: Ibe2db784287ff1557aec983829781378578016c0
CRs-Fixed: 2668253
if peer delayed ba is true then value of preamble will be eventually
overwritten by previous frame (HE) and would give wrong values when
shown in pcap for radiotap fields. phy_mode is set to preamble value to
hold it and later on set it to mpdu_info preamble.
Change-Id: I054d27064b9ad151130fcbc1684594308352cef4
Add check for sg formation.
Only enable chfrag_cont and msdu_continuation if reo
error code is HAL_RX_WBM_ERR_SRC_REO or rxdma_err_code
is HAL_RXDMA_ERR_UNENCRYPTED.
Also chain all nbuf in case of sg in separate buffer
and finally loop through that. This is added because
sometime we dont get desc in sync with hw.
To avoid such mismatch, this buffer is added.
We will process nbuf only when all msdus has been
received.
Change-Id: I3b154a68955db61f3acaa0cb8d130c8918a3d450
CRs-Fixed: 2672126
The status nbuf replenish can fail in low memory
scenario, and the error logging can flood the console.
Ratelimit the status nbuf allocation failure logging.
Change-Id: I8e26b1060fdca62d36236f2d57fbbf7be165e3c6
CRs-Fixed: 2678202
Two back to back same RX desc is received from
REO2SW1 ring. After first RX desc is processed,
RX_desc nbuf will be set to null.
when second REO entry/same RX desc is processing,
dp_rx_desc_nbuf_sanity_check() will access to RX_desc nbuf, null
nbuf accessing lead to panic.
As a WAR, check RX_desc in_use flag firstly to avoid
invalid accessing to nbuf, move
dp_rx_desc_nbuf_sanity_check() after it.
Change-Id: Ib9455c76af85cf83587c1428b20a9ad9e93a9499
CRs-Fixed: 2672088
Check the return status of the osif->rx function and in case
of failure drop the skb. This is needed when OOR error frame
is received and if the frame was not delivered to stack it
needs to be dropped.
Add error counter to periodic stats to determine how many Rx
packets were rejected or were dropped since deliver to
stack failed.
Add the new status check for delivering rx frames to stack
under MCC specific flag - DELIVERY_TO_STACK_STATUS_CHECK.
Change-Id: I9b1c795f168774669783cc601e68003a7747a279
CRs-Fixed: 2672498
Move dp_tx_peer_init before dp_peer check to init for
bss_peers as well for MCAST packets. Add TSF timestamp
for wbm completion path in TX Capture feature.
Change-Id: I7da500671e2c22a937cae8770ce5357b9bbe5364
Do a logical split of dp_soc_attach and
dp_pdev_attach into Allocation and initialization
and dp_soc_detach and dp_pdev_detach into
de-initialization and free routines
Change-Id: I23bdca0ca86db42a4d0b2554cd60d99bb207a647
Fix the skb leak in dp_rx_process where rx descriptor cookie
validity fails. This skb should be cleaned up as part of the
rx desc and nbuf free function called during the driver unload.
However this will ensure that the skb released and added rx desc
added to the free list during dp_rx_process itself.
Add skb map, unmap functions, line numbers and if the nbuf is
mapped or unmapped to the nbuf tracking table. This debug info
will be logged once the skb is leaked.
Change-Id: I52dbf38922be20fc0aaea380e0e572af16de773e
CRs-Fixed: 2662992
Lot of checks in Tx completion path are for special handlings
such as when ol stats are enabled some protective debug checks etc..
Add a logic to fast free of buffer at transmit completion.
If extended stats not enabled(Typically needed for enterprise cases)
do the buffer free faster. This is controlled through a flag.
Change-Id: I04873b5e3643d8e93e5b248fcaf23504dcb7624f
Since the peer unmap handler removes all the associated
wds ast entries, the redundant API dp_peer_flush_ast_entry
can be removed.
Change-Id: Ib8fc19e846e07f9a60c73530cac66d357a00fd98
For HTT messages (no matter they are test commands or not) which do not
have FW responses, tag them for runtime PM feature so that corresponding
usage count will be decrement right after sending them through HTC to
avoid usage count mismatch. Tag the missing ones in this change.
Change-Id: I3f78d21a5a490db6dff0dd2786d87c3ced66180c
CRs-fixed: 2672301
Currently, mcopy mode delivers first msdu(fcs_passed 128 bytes) per-ppdu
to upper layer, add support for Extended mcopy mode to deliver first
msdu(128 bytes) per-MPDU(fcs_passed).
Change-Id: Ib345fc14a8d468788b9de78516d27e8dff24caa4
CRs-Fixed: 2644175
crash scenario:
(1) during dp_vdev_detach_wifi3(), it will reset related outstanding
TX desc vdev pointer to NULL.
(2) In the meantime, if this vdev TX completion is received from HW,
dp_non_std_tx_comp_free_buff() do nothing for nbuf due to null vdev,
leak will happen.
add error handling in dp_non_std_tx_comp_free_buff() to fix it.
Change-Id: I942a3d690711c60e8299d86562f08f0fb77f0b32
CRs-Fixed: 2670186
Do batched invalidate of tx completion descriptor to avoid
unnecessary D-cache miss for 32 byte size descriptor.
Change-Id: Ia580fe78dcef5b36f117aaad171a2df6d0e34966
In OOR error handling scenario, msdu is spread across
two nbufs. Due to this, there is a mismatch between
msdu count fetched from MPDU desc detatils and count
fetched from rx link descriptor.
Fix is to create frag list for the case where msdu
is spread across multiple nbufs.
Change-Id: I1d600a0988b373e68aad6ef815fb2d775763b7cb
CRs-Fixed: 2665963
Split dp_rx_pdev_attach into dp_rx_pdev_desc_pool_alloc,
dp_rx_pdev_desc_pool_init, dp_rx_pdev_buffers_alloc and
dp_rx_pdev_detach into dp_rx_pdev_desc_pool_free, dp_rx
_pdev_desc_pool_deinit, dp_rx_pdev_buffers_free APIs
This split is made because dp_pdev_init is introduced
as part of this FR and these APIs will be called from
dp_pdev_init/dp_pdev_deinit or dp_pdev_attach/dp_pdev_
detach accordingly to maintain the symmetry to DP init
and deinit path
Change-Id: Ib543ddae90b90f4706004080b1f2b7d0e5cfbfbc
CRs-Fixed: 2663595
Split dp_mon_link_desc_pool_setup to alloc and init APIs and
dp_mon_link_desc_pool_cleanup to deinit and free APIs
This split is made because dp_pdev_init is introduced
as part of this FR and these APIs will be called from
dp_pdev_init/dp_pdev_deinit or dp_pdev_attach/dp_pdev_
detach accordingly to maintain the symmetry to DP init
and deinit path
Change-Id: I36b2a98bd317010124916e0b2779938eba3883ea
CRs-Fixed: 2663595
Split dp_hw_link_desc_pool_setup into dp_hw_link_desc_pool_alloc,
dp_hw_link_desc_pool_init and dp_hw_link_desc_ring_init APIs, and
likewise split dp_hw_link_desc_pool_cleanup into deinit, ring_deinit
and dp_hw_link_desc_pool_free APIs
This split is made because dp_pdev_init is introduced
as part of this FR and these APIs will be called from
dp_pdev_init/dp_pdev_deinit or dp_pdev_attach/dp_pdev_
detach accordingly to maintain the symmetry to DP init
and deinit path
Change-Id: I1682a59847db5d3441e85b00768667066bf5edf2
CRs-Fixed: 2663595
Split dp_srng_setup into dp_srng_alloc and dp_srng_init
likewise split dp_srng_cleanup into dp_srng_deinit and
dp_srng_free
This split is made because dp_pdev_init is introduced
as part of this FR and these APIs will be called from
dp_pdev_init/dp_pdev_deinit or dp_pdev_attach/dp_pdev_
detach accordingly to maintain the symmetry to DP init
and deinit path
Change-Id: I421fbd5bce074af6f75c147742f44e03568e6403
CRs-Fixed: 2663595
For qcn9000 in case of monitor mode, reap monitor destination
ring first and status ring later to avoid backpressure
on monitor destination ring
Change-Id: I4e1931afe0453221f1326ca7bdb7f0273cc7363d
CRs-Fixed: 2670656
Restrict DMA Map/UnMap upto buffer size for packets in rx process.
This gives 2-3% cpu gain in peak throughput.
Change-Id: Iaf5e9f6f734d80b6d2c234bd8e679cf2a81c7e2c
CRs-Fixed: 2660698
Decouple IPA TCLring and IPA WBM completion ring size from regular
Tx TCLring and WBM completion ring size configuration.
This is required as there is limitation on IPA GSI rin size
configuration.
Change-Id: I689d0e8ca72f069c5b68dc1789358e091c554d30
CRs-Fixed: 2665010
Size of the TLVs have changed across generation of chipsets
Offset values need to be configured into DMA register for preheader DMA
Added APIs to get offsets of each TLV based on chip type
Change-Id: Ic011332cbf3a1017f324f246e47c9e2c91441c70
