Check the existing two connection are in below comibation or not
GO + GO
GO + GC
GC + GC
GO + STA
GC + STA
If the existing two connection are in above combination and third
connection comes as GO or GC or STA then check whether firmware
supports p2p-p2p concurrency or not.
if firmware supports p2p-p2p concurrency and third connection is
GO or GC or STA then only allow the third connection as GO or GC
or STA otherwise do not allow third connection as GO or GC or STA
with above combination.
Change-Id: I0c2408232e84438dc5dd8d104b75fdee126aa31f
CRs-Fixed: 3043845
2 threads blocked to wait channel_switch_complete_evt for SAP channel
switch is already in progress, qdf_event_set only woke up 1st thread
later, 2nd thread still kept blocked with hold net_dev for debug id
NET_DEV_HOLD_COUNTRY_CHANGE_UPDATE_SAP, leak happened.
Change-Id: Ib76318dd4a613ca1852a56b7701a04385b69ba56
CRs-Fixed: 3061976
2 threads blocked to wait channel_switch_complete_evt for SAP channel
switch is already in progress, qdf_event_set only woke up 1st thread
later, 2nd thread still kept blocked with hold net_dev for debug id
NET_DEV_HOLD_COUNTRY_CHANGE_UPDATE_SAP, leak happened.
Change-Id: Iad296f68aeaefe5a6b88ad6bea95cc377b2ae515
CRs-Fixed: 3061960
Add API to get dp peer authorize state.
Also modify dp_tx_get_rbm_id_li to update rbm for IPA offload
scenario
Change-Id: I0f8cca4623a1c3b840f336aa6d67740951cb6700
enum wmi_channel_width has defined WMI_CHAN_WIDTH_160P160
and WMI_CHAN_WIDTH_320. Therefore add corresponding
definitions in enum wmi_host_channel_width, which is then
1-to-1 mapped to enum wmi_channel_width.
Change-Id: Iff5dc1f678874e1d15581a1ebbacc06c25d09699
CRs-Fixed: 3062062
Based on the new NCHO requirement, allow ADDROAMSCANFREQUENCIES to add
roam scan frequencies irrespective of the roam scan control value.
Change-Id: I5742f6d590e3ec51bfb294610ede05b1935a4790
CRs-Fixed: 3046763
From 5.11 kernel, nla_strlcpy() is renamed to nla_strscpy() since
it works more like strscpy() than strlcpy() after the enhancement.
Hence handle it accordingly in WLAN driver by creating wrapper API
wlan_cfg80211_nla_strscpy().
Change-Id: I4c5ca1738048605c842c827d1706353bc012fed8
CRs-fixed: 3060060
From 5.14 kernel, panic_notifier_list is moved from kernel.h to
panic_notifier.h, hence explicitly include the header file in
order to access panic_notifier_list.
Change-Id: Icf546ebea5a19b79602031b4fd92b498db0048c0
CRs-fixed: 3060060
Fix the second cfreq2 frequency returned by the service
API, wlan_get_320_center_freq, for a channel ranging
between 33 (6115MHz) to 61 (6225MHz).
CRs-Fixed: 3060832
Change-Id: I656a5d6633cfa48aaeff5f0ba53e4c6138f5d8f8
Handle announce timeout value that is received as a part of
the TWT setup command and provides it to the firmware through
the WMI_TWT_ADD_DIALOG_CMDID. If timeout value is non-zero
then firmware waits up to timeout value to use data frame as
announcement frame. If timeout value is 0 then firmware sends
explicit QoS NULL frame as announcement frame on SP start.
Change-Id: I682d1dc4e304042e4e9b8d6c6a73dc13fbbdccab
CRs-Fixed: 3053956
Adding a nbuf and nbuf->data prefetches in 2nd loop
of Lithium datapath RX improved UDP throughput by
about 250Mbps.
PINE default driver: 3189Mbps @ 100% core-3
PINE with prefetch: 3469Mbps @ 100% core-3
Note: PINE reo ring is mapped to core-3.
Change-Id: I7f166b52c3697facdce3954994755c9c1412c1f3
Host sends the EXT CAP IE based on the capability
coming from the supplicant in join request. But, after
roaming the cached join request will be freed. Therefore,
after roaming few capabilities sent by the userspace are
not saved and therefore lost in reassoc request.
Save the EXT CAP IE from the join request in the VDEV
and use the cached capability for sending Ext cap IE.
Change-Id: I71947388b4c6e9e56a5832557416d9b462de70e2
CRs-Fixed: 3038496
There is frequent output when get unexpected vendor specific action
frame. So, add this change and reduce the log level.
Change-Id: I9d832546a4436bdf7dd25cb00a7de5cce1295b31
CRs-Fixed: 3060750
Currently, target_if forwards the blacklist event to upper layers
even if there is no AP info present. This event can be dropped in
target_if to avoid accessing unallocated memory.
Change-Id: Icfaabb0a8e3304882979ffde7f5cd27fd4c8a067
CRs-Fixed: 3057424
Add support to send beacon miss disconnection logging event.
Fix the diag attribute end marker in the event table.
Change-Id: I11fc8859af383b69bcba42654fb3a2bc597fef83
CRs-Fixed: 3056266
Currently WMI_DBGLOG_TIME_STAMP_SYNC_CMDID command sent
every 1 sec causes RTPM collapse and inturn has power
impact. So to avoid this enable time of the day synchronization
only after connection/roaming.
Send WMI_DBGLOG_TIME_STAMP_SYNC_CMDID as part of RSO
start command.
Change-Id: Iee3cefe1318a6e5507a43cefb9666cc2a439fe06
CRs-Fixed: 3060762
In certain cases the driver checks whether the peer is a assoc link
or non-assoc link, in case of legacy connection when mlo is disabled
return true for assoc link.
Change-Id: I50e6b22754ffb26fbb4b7892a962bc754479f7a8
CRs-Fixed: 3059278
Currently driver invokes regulatory callbacks after pdev create
and from reg cc event processing. In case of restart of the
driver because of SSR or idle restart, driver ignores the default
country and sets the user set country which was there before SSR
or idle shutdown. Now driver continues restart and creates pdev.
During pdev creation it propagates reg rules from psoc to pdev
which was there in psoc before shutdown and after pdev creation
it invokes the regulatory callbacks, as part of this hdd dynamic
callback is invoked and it tries to schedule the regulatory work.
Since idle restart is a vdev operation so driver is not able to
schedule the work as it does not get the dsc op and it waits for
500 ms to reschedule the work. In this 500ms time driver gets the
response of the set country command which was sent to fw to set
user country. This command also invokes the hdd dynamic callback
and regulatory work gets scheduled and scan channel list command
is sent to fw.
Now if any scan is going on in the FW and after 500ms if first
work gets rescheduled, it again sends the scan channel list to fw
which cancels the ongoing scan.
To address issue, add a change to not invoke regulatory callbacks
from pdev creation if user country set is pending.
Change-Id: I5686163644409ef19507c19ae31f7f1e7892931f
CRs-Fixed: 3054603
The current PN is a 128-bit field which was incorrectly
stored into a 64-bit variable, leading to stack corruption.
Fix this by increasing the size of the variable
for current PN to 128-bits.
Change-Id: Ib26cc0bb7d244360afb258a55d5b9a8ddd6aa4ca
CRs-Fixed: 3059345
pdev is declared in nan_enable_req after a variable-size array.
Place the pdev declaration before the array to avoid corruption
while copying contents to the buffer.
Change-Id: I92766c40909bcecaed5f1eb6e2f015447f3c8221
CRs-Fixed: 3060146
Move basic IEEE 802.11 field definitions that are not specific to
cryptographic functionality, from a cryptography related header file
to a common header file for IEEE 802.11 definitions so that these can
be used by other 802.11 protocol processing modules. The crypto header
file already includes the common header file, so there is no effective
change in code visibility of the definitions for crypto code.
Change-Id: I439fe818a457cc7694fdb431f5d2c1a7552f2caa
CRs-Fixed: 3059572
Add stop timer flag to avoid resubmission of tx capture work queue timer
while del_tiimer_sync.
CRs-Fixed: 3056656
Change-Id: I72bfb6916f02297b15bb733359c0e4d7f91f0b73
When the AFC response has a disjoint set of CFIs and frequency range,
the ACS trigger is called even though the AFC master channel list is
empty.
Due to this, ACS happens even though the AP's destination power
mode is LPI.
To fix this issue, call ACS trigger only if the AFC master channel list
is non-empty.
Change-Id: I217d23827b34ac577649b82b278a203bf01fa1f6
CRs-Fixed: 3052805
As part of target if convergence, roam stats event handling
is moved to target if from wma. BTM request logs are not
sent in the new path.
Add support for BTM request logs in connection manager.
Change-Id: Icc66c5dc608260f2a0f75c5d1a85c799195f9f3e
CRs-Fixed: 3054987
Remove ifdef macro inside a function and move the mlo param
update to separate function.
Change-Id: I2037519fda00c17efcec3bab34340f27d58324c0
CRs-Fixed: 3058432
Deliver the oldest management frames to upper layers if
the management rx reorder list grows beyond the maximum
configured size.
Change-Id: Id0199849e26804310dd502051b8e14f56f0df795
CRs-Fixed: 3051431
In current implementation, validation code of
SCC, MCC, DBS or SBS is repetitive for all
combinations.
Remove repetitive validation code and make
common apis for scc, mcc and dbs validation.
Change-Id: Ic88f01dd9bbcc3d5dcc3453b2c6fef030cfe0305
CRs-Fixed: 3052959
Framework disables p2p before enabling NAN as P2P+NAN concurrency
is not supported. NAN operations happens through wifihal and p2p
operations happen through wpa_supplicant which are two different
userspace components. Wifihal call to enable NAN may come to host
driver before disabling p2p through wpa_supplicant. There are high
chances for p2p scan to be in running state while NAN enable is
received. Firmware NAN state machine goes to inconsistent state
and disables NAN as p2p scan is running in such cases.
So, stop the ongoing p2p scan before enabling NAN as P2P+NAN
concurrency is not supported currently.
Also, forward the pdev to NAN component inorder to iterate through
all P2P vdevs.
Change-Id: Ibe30a5ebe90514aee4f6721cdc5476570524cad8
CRs-Fixed: 3054576
Add definitions for size in octets for the following subfields in the
Common Info field of Basic variant Multi-Link element: BSS Parameters
Change Count, Medium Synchronization Delay Information, EML
Capabilities, and MLD Capabilities. These definitions are as per
IEEE802.11be D1.0 (but also happen to apply as of IEEE802.11be D1.2).
Change-Id: I36725292f29da1f03caed6baa5d25c02a06c2c4f
CRs-Fixed: 3057853
For specific QCA6174 device, need clear LOW_POWER_INT_MASK register
bit3/4 to disable pcie low power interrupt after suspend, bit3 is for
INTR_L1SS and bit4 is for INTR_CLKPM, this is to fix issue that PMIC
VREG_L30A don't turn off when XO is in shutdown state.
Change-Id: I4833e4143c48a3bf734745a5e772a7a76a94d63c
CRs-Fixed: 3028269
The MLO cap is getting reset as part of getting valid candidate, this is
leading to reset of MLO cap for supplicant selected ML candidat as well.
Add fix to Clear vdev MLO Cap as part of updating vdev mlme address
Change-Id: I19ce9711011173505a829dc5b308e8890b8ffe6c
There is a memory leak in the mlo connect failure the connect req
and the connect, ies are not getting freed because of the mlo is vdev
check. During the allocation there is no condition as such, so remove
the same during the connect failure path to resolve the memory leak.
Change-Id: I9076761cd3b918435af9929fcf888996d2129e98
CRs-Fixed: 3057979
FW may experience HWDTIM mode enter and exit, if HOST can't queue
frames fast enough, this will bring 10ms latency for TX under WoW.
This change adds an indication bit to notify FW whether a TX happens
after WoW wakeup, then FW can discard HWDITM and reduce TX latency.
Change-Id: Ib695a0e5d032af4be27fef59f3c5123a35428d7d
CRs-Fixed: 3046987
FW may experience HWDTIM mode enter and exit, if HOST can't queue
frames fast enough, this will bring 10ms latency for TX under WoW.
This change adds an indication bit to notify FW whether a TX happens
after WoW wakeup, then FW can discard HWDITM and reduce TX latency.
Change-Id: I74f7311fc0639186ee0bca711160bb8c0d5d9fb3
CRs-Fixed: 3055501
The bonding channel array is calculated by adding center frequency to
hardcoded offsets.
Since, they can be calculated by Artihmatic Progression, replace the
hardcode assignments.
Change-Id: I4f145ac05f8266a69a6787783cb627200f52563e
With the introduction of 240/320MHz channels with 11be, sub-channel
marking has to enhanced.
Find the sub-channels of the 240MHz/320MHz channel that got affected by
radar.
Change-Id: I0b0d057b533ad4e6c4d1627c878e3823d1c75979
With the introduction of 11BE, channel puncturing becomes possible.
Hence, the DFS channel structure should be updated with channel puncturing
information.
Change-Id: Ia1bccd55e7fadde2a49fb08bd30ff6b5b2cc6ba1
Add the following DFS channel flags for 11BE:
1) WLAN_CHAN_320MHZ
2) WLAN_CHAN_EHTCAP
3) WLAN_CHAN_EHT20
4) WLAN_CHAN_EHT40PLUS
5) WLAN_CHAN_EHT40MINUS
6) WLAN_CHAN_EHT80
7) WLAN_CHAN_EHT160
8) WLAN_CHAN_EHT320
Add the following checks for both 5G channels and 6G channels:
1) WLAN_IS_CHAN_11BE_EHT20
2) WLAN_IS_CHAN_11BE_EHT40
3) WLAN_IS_CHAN_11BE_EHT80
4) WLAN_IS_CHAN_11BE_EHT160
5) WLAN_IS_CHAN_11BE_EHT320
Update the WLAN_IS_CHAN_DFS check to include 11BE modes.
Change-Id: I2bd9e877aa0b4fca8f93bf2b72247f8fc29ae833
