AV1 bitstream frames can have different resolutions than
sequence resolutions. Subscribe to BITSTREAM_RESOLUTION and
CROP_OFFSETS metadatas and exopose them to clients so that
clients can receive per-frame resolution and crop.
Change-Id: I7c0503f25ddde201979d13ff18028681f685d649
Signed-off-by: Mihir Ganu <quic_mganu@quicinc.com>
New dma_buf_vmap api takes dma_buf_map struct as argument,
instead of kvaddr.
Change-Id: I2843a28b2c0c2de2d9cd1bfa96fb1a86ffba6059
Signed-off-by: Chinmay Sawarkar <quic_chinmays@quicinc.com>
1.) New dma_buf_vmap() returns SUCCESS or FAIL unlike legacy dma_buf_vmap()
which return type is vmap address. dma_buf_vmap() takes two arguments now.
Now it returns vmap address in pointer passed as second argument.
2.) If defined, use V4L2_CTRL_CLASS_CODEC else use V4L2_CTRL_CLASS_MPEG.
3.) iommu_dma_enable_best_fit_algo is commented temporary.
4.) remove subsystem_resart.h
Change-Id: I73c6a840fa6028f021debff33b88178ac74dcef9
Signed-off-by: Mahesh Kumar Sharma <smahesh@codeaurora.org>
Use maximum framerate from published
instance caps to make it platform
agnostic.
Change-Id: I319768e722774969287abb9e782ddbece7593ff9
Signed-off-by: Priyanka Gujjula <quic_pgujjula@quicinc.com>
[1] Disable MMRM if platform feature
does not support.
[2] Query for scaling support from
mmrm driver and enable/disable
based on queried support
accordingly.
Change-Id: I34cf9a9e150b0823828507e3f5d680aae6eb14d4
Signed-off-by: Priyanka Gujjula <quic_pgujjula@quicinc.com>
Currently, statistics is printing for every 2 second
And these delay is hardcoded.
So changes added to update the statistics delay from the command-line.
- adb shell "echo 200 > /d/msm_vidc/core/stats_delay_ms"
- adb shell cat /d/msm_vidc/core/stats_delay_ms
Use above command to update & read statistics delay.
Change-Id: I523a870203ee460d1dba8208b798f28253407e73
Signed-off-by: Gaviraju Doddabettahalli Bettegowda <gdoddabe@codeaurora.org>
add checks to limit max number of sessions supported based on
resolution.
max number of 720P sessions: 16
max number of 1080P sessions: 8
max number of 4K sessions: 4
max number of 8K sessions: 2
Change-Id: I2a784a0d28ba050923bdc7f42a21ee9801d01d86
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
Allow one 8k + one 4k realtime sessions.
Maximum allow two 8K sessions which includes RT and NRT sessions.
Change-Id: I68acfc4942c5c930bed7d9584cd82f2667010136
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
Query final values of session params like stage,
pipe and quality mode from FW and check if they
are the same intended values as configured by
the driver.
Change-Id: I1a504401a599860ab971e34e1e184e67631d6120
Signed-off-by: Chandrakant I Viraktamath <civirakt@codeaurora.org>
add support for HFI_PROP_MAX_NUM_REORDER_FRAMES.
add ctrl for this metadata for avc and hevc.
Change-Id: I9a7b95f130e58f810255aff23e9b605304841072
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
- Added change to print buffer statistics like total and avg
etb, ebd, ftb, fbd counts, client set fps, actual fps,
bitrate values in 1 sec window and these stats currently
configured to print at every 1sec boundary.
- Convert meta buffer prints to low level logs.
Change-Id: I1c93eea90fbd5460eb51bbf133c513157003d51e
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Cap chroma qp offset value other than -12 as 0.
Change-Id: I0ca9c4844ab835a9365e695f38deff90768191aa
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
Enumerate supported color formats based on preference.
Compressed format should be populated first, then linear formats.
Change-Id: I82ebd9b9386098575c257b193be37e07ab476d9a
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
Add support to dump all queues(cmd, msg, dbg) as part
of handle_system_error using devcoredump framework.
Change-Id: Ia1b011a29e6bc657eb002dbba09deab62dc0b2b2
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
- make B and P frame QP controls as dynamic.
- enable I/P/B QP to fw as and when these
controls are set to the driver.
- remove HEIC qp support.
Change-Id: I7f45ab0bda75df8128bbbdfcebe66c2cae208b06
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
1. Calculate framerate based on buffer timestamp
2. If framerate changed and stable for 2 frames,
update it to firmware and in driver internally.
Change-Id: I7feda86dec8fcfc1dff6defac8c15a97c1b8393e
Signed-off-by: Priyanka Gujjula <pgujjula@codeaurora.org>
- Maintain free & busy pool to track buffers separately
- track double-free cases during msm_memory_free()
- track memory leak, by checking busy pool buffer count.
it is expected to be zero at the end of a session.
- maintain common api's to init, alloc, free, destroy
for all below buffer types.
- struct msm_vidc_buffer
- struct msm_vidc_alloc
- struct msm_vidc_map
- struct msm_vidc_timestamp.
Change-Id: Ib8655047c3883ea6601344661058d7a629ffd5bd
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Client can choose to run an encode session to acheive maximum
performance rather than maximum quality.
Add the handling to configure video core accordingly for the
configured video session.
Such configuration is only applicable for non-realtime session.
Change-Id: Ife290b377c844e5b1d3be93b2509c787f8e05c59
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
Encoder supports downscale with scaling ratio upto 1/8 of width
and 1/8 of height. So added necessary scaling checks at streamon.
Change-Id: I3a29b43c79cf4e693ba2c0d9f98ec24410d50fbd
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Add strict check in msm_vidc_check_mbpf_supported() to
reject image session, if total image load exceeds 16K.
Added msm_vidc_print_insts_info() support to print all
running instance info, if new session is rejected due
to mbpf/mbps checks.
Change-Id: I98bab985fcf4f4d20c6f263c48e0c701ec86ab6f
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
During input port streamoff, state is changed from START_INPUT
to OPEN and then sent CMD_STOP to firmware. So reverse thread
acquired the lock and trying to process IPSC. Since IPSC is
not allowed in OPEN state, driver treats that as a fatal issue
and moves inst->state to ERROR state. Added change to avoid
above mentioned issue.
Change-Id: If0e18f01b6ecac3c810c0dab878ae392c48ffc27
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
adjust MAX_MAP_OUTPUT_COUNT based on resolution
to enhance performance and reduce memory pressure.
- For 8K session: count = 20
- For 4K session: count = 32
- For 1080p session: count = 48
- For all remaining sessions: count = 64
reduce MAX_DPB_COUNT to 32.
reduce DEFAULT_MAX_HOST_BUF_COUNT to 64.
Change-Id: I0e6d25121947524b843e9cce96b75871aba174af
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
Do not unmap buffers when firmware sends release
done. Only delete these buffers from release list.
Unmap buffers when removing stale entries from
mappings list.
update max dpb count to 32 and host buf count to 128.
Change-Id: I71fc3f722f068d8f2eeeb81041d4e495092c254f
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
[1] Added return type to strict_check() api and bail out if
strict_check fails.
[2] Fix all the failures with #1.
[3] Added WARN_ON() for strict_check failure.
[4] Ensured &core->lock is acquired before calling below api's.
- __write_register
- __write_register_masked
- __iface_cmdq_write_relaxed
- __suspend
- __resume
- venus_hfi_core_init
- venus_hfi_core_deinit.
Change-Id: I7f0a3ca6c2aec2758220c90bff9260367f10820b
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
If workqueue creation fails, driver is accessing buffer lists
in session close sequence, which is not yet inited and leading
to NULL ptr dereferrence issue, while traversing uninitialized
list. So added change to avoid accessing list without init
completion.
Change-Id: Icb3aa6b7edaf27e73873ec289d6a921a2613e77e
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
To avoid memory leakage, clean children and firmware lists
at session close, error cases, and at the end of each usage.
Change-Id: I1eadbf81da207bd987c50428c0c7cf4967a8885f
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
Modify cap values for below properties:
[1] VBV Dealy: default as 300, min as 100, and max as 300
[2] Peak bitrate: default as avg bitrate set by client.
Change-Id: Ic9533e8a40e789128e5baa975bf1a0355e373e08
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
Add support to calculate and print encode and decode
time, and average time consumption per fbd sample.
Change-Id: I5e867833d1d88285bfebc8c9b9a593e3ed975ed5
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
Increase max buffer count to release the buffers,
Change-Id: I34774a8e99c7a5c78f79e8ca101e6135a22e7f30
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
Due to delayed unmap feature on decoder output buffers,
refcount will become one when no one uses the buffer
in driver. In release done functonality, remove the
buffer from maps list only if refcount equal to one.
If refcount is more than one indicates the buffer is
being used, so do not remove from maps list. There are
chances that same decoder output buffer might be queued
by the client in which case we are not supposed to
unmap it from maps list in release done.
Change-Id: I69250c3efa89d77055e89770fd441af1fb50b755
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
- subscribe for dpb list property in combined
mode on output port.
- copy dpb list property payload from fw to
static array.
- using this array, mark read_only list buffers
as non-reference if not part of array. if count
of such buffers is greater than output min count,
send to fw for release.
- once fw returns them, destroy these buffers.
- unmap stale output mappings due to lazy unmap feature.
- unify release internal functions into common function.
Change-Id: Id32f04efb19eecaff453cc4383ee8296a0246263
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
