SAP Rx TPUT is bounded by host network stack, which is running in the
context of IPA work-queue, when IPA offload data path enabled.
However RPS shouldn't enabled for legacy Rx data path, where NAPI is
enabled. So, we dynamically enable RPS for SAP interface when the vdev
comes up and IPA was enabled only.
Send RPS enable indication to CNSS daemon to enable RPS only when SAP
interface comes up and disable RPS when SAP interface is closed.
Change-Id: Ia669b2c3ae814d0577f5226d8acbf026740ad760
CRs-Fixed: 2129520
LRO rx jumbo packets cannot be forwarded to other vdev and kernel drops
them with warning message:
"skbuff: wlan0: received packets cannot be forwarded while LRO is enabled"
So disable LRO capability during concurrency.
Change-Id: Ib35e1ee5f9c18a846e21ce1eb293e12e17761fa8
CRs-Fixed: 1092193
Remove buffer allocation for holding amsdu llc header. The
next amsdu llc header is copied to the end of previous msdu
skb buffer.
Check if monitor vdev pointer is NULL on packet delivery
on monitor mode to avoid crash.
Change-Id: I61dc53900c34f34d8dccb2e8b71cbdf5e005f61e
Provide an API to accept the config parameters
from the upper layer and store them in wlan_cfg_ctx.
Enable/Disable the datapath features based on these
parameters.
Change-Id: Icbdc835a51a6fea87c06174e9fc63d5d007aec1d
CRs-Fixed: 2097229
Add support to send MSDU, mgmt. and ctrl payload along with metadata
to upper layer callback
FR 42132
Change-Id: Ie751322c7c15419ea908538e9e8687b64693fcfa
CRs-Fixed:2068486
Changes related to If63678a7e9ce00c1166e7f6533e5eaa0b0ae67a5
on modifying declaration of dfs_mlme_start_csa function on mlme side.
Change-Id: Id746faaaa2cdbdb48f80056eec3dd661a30122e5
CRs-fixed: 2117811
add support to return msdu link descriptors received on rxDMA error ring
to wbm release ring without freeing the nbufs (msdus).
Change-Id: Ic12c3f0531a639b61d3d77cee6266ce595e4d1c9
For passive scan host expects dpp public action frames which
are broadcast. So set 3rd bit of scan_ctrl_flags_ext to 1, so
that firmware sends these frames to host upon passive scan.
Change-Id: I7ab70ef92d9226fc265e99f3d1196c5ebae6acb4
CRs-Fixed: 2124683
TDLS set state cmd to firmware is going out of sequence, if STA
is disconnected, when concurrent TDLS connections are active.
This out of sequence causes crash in the firmware.
Fix the out of sequence issue, by grouping all the TDLS delete
peer commands into one single command.
Change-Id: Idd315d544c46bcf063881bff5be70cb5d9ad0ea2
CRs-Fixed: 2123838
Update of per-peer statistics was disabled from per-MSDU indications
as they are now updated from per-PPDU indications. However, the data from
per-PPDU indications is incorrect for some fields. Re-enable update of
statistics for per-MSDU completions till this issue is fixed in FW
Change-Id: I2983ef9244a6f95104ba49ab6d1c6543a951d0b2
CRs-Fixed: 2128230
This update is for moving of AP/GO to enforce SCC for 3-port
combinations AP+AP+STA and AP+GO+STA.
Change-Id: I878b56cd8215f0d0f846af62fa2033b268e96317
CRs-Fixed: 2127091
Policy Manager updated when new connection request is under process.
The update is resctricting below behavior:
1. Maximum 2 vdevs are only supported per mac.
2. Intraband MCC among beaconing entities shall not be supported.
3. Intraband MCC shall be allowed when STA is operating on
DFS/Passive/LTE avoidance channel.
4. No DFC SCC shall be allowed both in 2-port and 3-port for Auto.
Change-Id: If4e78791832207838c38ab7525f8081093cc73ed
CRs-Fixed: 2127091
Currently ini variable gWlanMccToSccSwitchMode has 4 values.
Value 3 enforces SCC in anycase, if SCC is not possible then switchoff
the AP.
Added new value 5 for auto specific scenarios where, if SCC is not
possible the allow MCC.
Change-Id: I584958c6c61f7d1f5e077871e3891bba79f726a3
CRs-Fixed: 2127091
In case of SBS or DBS, both the MACs are used for operations.
We have issue in PCL index fatching routines for 3-port
concurrent combinations when first two ports are configured
in DBS mode.
Change-Id: I36ca9979ef4222428e383d89b52ff1388c79ac22
CRs-Fixed: 2127091
Updated PCL table to support 3-port concurrent scenarios AP+AP+STA,
AP+GO+STA and AP+AP+AP.
The PCL entries are updated to have below behavior:
1. AP+GO or AP+AP will be supported either in DBS or in SCC mode
2. The Precedence order will be DBS, SCC.
Also disabling 3-port combinations with P2P-CLI.
Change-Id: I678e2b5a49577e173c0e34f83a7ccc528313aadd
CRs-Fixed: 2127091
Adds support to enable/disable scans for the psoc.
Also adds API to set and get the scan enable/disable status.
Change-Id: I2ebb6f9c7fffabef90e9f8c461bdf735e95f0db3
CRs-Fixed: 2124783
During an SSR/PDR any threads waiting on an event won't be purged
unless they are timed out. This increases the recovery time taken
by the host after an SSR/PDR. Before waiting on an event, put the
event in a list. During an SSR set all the events in the list and
return error to the threads.
Change-Id: Iac4790a88cde1665fba4c23924566b4b309a2b03
CRs-Fixed: 2045141
Log the necessary debug information before freeing the dynamically
allocated memory while sending WMI commands
WMI_ROAM_CONFIGURE_MAWC_CMDID and WMI_NLO_CONFIGURE_MAWC_CMDID.
Change-Id: I10c8a96f8bb1a6cb661501f9ae9b9b21560980de
CRs-Fixed: 2094763
Few of the serialization APIs are de-referencing the pointer without
checking it against NULL.
Add a NULL check before de-referencing it.
CRs-Fixed: 2130161
Change-Id: I109518332e593e1f32936404021db1db7a332df7
Triggering crash at firmware due to
uninitialized value sent to firmware
as part of wmi_mgmt_params.
Initialize the management tx params
at p2p_mgmt_tx before populate.
Change-Id: Iea77266ee11f5742ea6a0074e4a6612452a764b1
CRs-Fixed: 2128419
Currently, driver sends add/delete pmksa entry to fw
whenever supplicant sends set/delete pmksa to driver.
Add support to flush all PMKSA entries as well.
Change-Id: Iace843cdf26bf06f3e70703f87c082997a78b894
CRs-Fixed: 2094234
Both the unified DHCP offload struct dhcp_offload_info_params and all
of the function prototypes use "camelCase" which is frowned upon by
the Linux Coding Style. Replace the camelCase.
Change-Id: I3f2ce74bc150668b96b1946ef7b2d556c23dad94
CRs-Fixed: 2121485
There is a possibility of buffer overread while processing PTT
commands, because of packet length check is missing.
While processing PTT commands, validate packet length to make sure
there is no buffer overread.
Change-Id: I65b2839b0812fc8b2421e4d73e14a05620411c53
CRs-Fixed: 2121017
Add cmn support for the following:
- Update ERP info in RSO Start
- Update HLP info in a new command WMI_PDEV_UPDATE_FILS_HLP_PKT_CMDID
- Set/Delete PMK cache info with WMI_PDEV_UPDATE_PMK_CACHE_CMDID
- Process FILS TLV in Roam Synch Indication and update the FILS info
[seq number,PMK, KEK, realm] to Supplicant.
Change-Id: I239bf5d6c4455d39181e335dbf73bcade16aee8e
CRs-Fixed: 2089128
Since support for magpie/k2 are EOL WLAN for past several
releases, we do not expect customer revisiting these products.
So all the code under ATH_SUPPORT_HTC has been removed.
Tests done:
MIG has passed
CRs-Fixed: 2105074
Change-Id: Idc6a1f28eda5cb09edf5375c142d9cb12d81ce0b
FW reports build number in service ready and ext_service ready event.
Save these to display FW build version during brinup.
Change-Id: Ia86a392f826c5bb836be9353e3938ab1f811ab62
CRs-Fixed: 2125667
The basic qdf bit ops are not atomic. Race conditions
can lead to messages stuck in queues without mc thread
being woken up.
Change-Id: I42093b863c7ed93c5c2baf0bd14106eb4fe082fc
CRs-Fixed: 2118014
Add a check in mec handler to see if mac_address is same as that of
vdev_macaddr.raw. If both mac addresses are equal, then add_wds_entry should
not be called. This corner case is seen in qwrap mode where the vdev address
is same as that of the backend wired station
Change-Id: I17504de8ef379680c2a2b962280e1853a5b2930d
CRs-fixed: 2109554
Added logic to reset the host interrupt mask bits for
NSS offloaded rings (WBM Tx completion ring and REO Destination ring)
Change-Id: I96ae29051b6294647cf0610d3cda6c2a995f77a8
CRs-fixed: 2121607
In order to facilitate debugging P2P issues, add debug information to
P2P component.
Change-Id: I0192b1ee25bb74dc512b01ad451b03d1a45a5446
CRs-Fixed: 2105782
The atomic flag 'mem_struct->in_use' should be accessed only after
a sanity check for 'mem_struct' in the function qdf_mem_free(). There is
a possibility that a double free can cause panic before the debug
logic kicks in.
Change-Id: I162b7e72e0f28f8808a7ae56efabb6620d17a6bd
CRs-Fixed: 2073968
Implement debugfs APIs abstraction for Linux. If a particular operating
system is not supporting debugfs or similar feature, these API's will
be a no-op.
Change-Id: I51316012876fec258e546fce8fc2f877e4311343
CRs-Fixed: 2097140
Add qdf abstraction for debugfs APIs such as create file, create
directory, create types and remove files/directory. If a particular
operating system is not supporting debugfs or similar feature, these
API's will be a no-operation.
Change-Id: I09fe366b85d4914ebdab52d3fb23acab72aa2116
CRs-Fixed: 2097140
Add file permissions and a function to map that to Linux OS. Also
define a type for __qdf_dentry_t and __qdf_debugfs_file_t.
Change-Id: I91b293b262d955324e65157909ca9d3b831e2cf6
CRs-Fixed: 2097140
for cases where hash is invalid (non TCP/UDP) let us remap
the traffic to a configured REO DESTINATION ring instead of
using default ring 0.
Change-Id: I3d08f684f1914b60a2457bdcc5c184fc8a0068e7
Packet log messages be coming as HTT messages for Lithium. Temporary
change to bypass HTC connection for this new HIF pipe (CE 5), which
will be used for packet log and other high-priority HTT messsages.
Proper HTC connection to be added later once required FW changes
are available
Change-Id: I53361b4c28b838dacf62f435cc12051bb2eb65b6
Adds support to dump dfs pulse information from firmware to host
for debug purpose.
Change-Id: I3b2042f8df6e077eed1a3847cd2d8550794bc6f7
CRs-fixed: 2121833
"string_from_dbgid" takes any value from 0 to WLAN_REF_ID_MAX(29) and
return a string corresponding to that index.
'strings' array has only 28 entries(0to27).
Add the remaining two missing entries
Change-Id: I27bf0ffe8341461c3f56eb02ae6482495b3cc338
CRs-Fixed: 2120818
