Following peer stats are updated in per packet Rx path:
to_stack
multicast
broadcast
In BE architecture, HW provides the support for basic vdev stats and
hence per packet stats updation of above parameters can be done only
when enhanced stats is enabled or HW vdev offload stats is disabled.
Avoiding per packet stats updation reduces CPU load and improves KPI.
Change-Id: Id7c11c025a8464951b615a7f7b006ce61db487fc
CRs-Fixed: 3067843
Dynamic GRO feature is enabled by default and aimed for specific
customers. Add an ini control to allow other customers to config
this feature enable/disable.
Change-Id: I7f505599327ac131b3cdac9b4d9e038861b1aeb6
CRs-Fixed: 3074689
Tid in RX frame header may be larger than MAX TID allowed
value, this will lead a out of boundary array access and
lead to kernel crash at last. Change is aimed to do a TID
check and discard such frame when necessary.
Change-Id: Ie9e7a1816d197d05cf845e81251ef7772721b849
CRs-Fixed: 3071743
Define a new cdp interface to fetch peer delay stats.
Define a new cdp interface to fetch peer jitter stats.
These interface APIs will be used by upper layers to fetch delay and
jitter stats per peer for telemetry stats feature.
Change-Id: I96ee6a861fa2626e7e1fba3df7df9ec64ff7e946
CRs-Fixed: 3071493
Repurpose the IPA tx and tx completions rings for
normal use when IPA is disabled either via config
flag or ini.
Change-Id: Ia4b6a89c73d888a217bdef40e3c05435c3bb1bb2
CRs-Fixed: 3059730
Currently the IRQ mask for tx completion near full
interrupt is not in sync with the tx completion rings
which are enabled for WCN7850.
Fix the mask for tx completion near full interrupt.
Change-Id: I1432191b260094060873406d48e04fde5b7bc35e
CRs-Fixed: 3052650
Dump flow pool stats even for low verbosity level as
part of periodic stats display.
Change-Id: Iea59d20b0a81cfd0bfdac65ad54a11fa33f30f2f
CRs-Fixed: 3031168
In WBM error path, add handling for packets received with
rxdma_psh_rsn as rxdma_rx_flush. Also add assert for packets
received with an invalid push reason.
Change-Id: I4e445d52f00bbbdca358225aef488da0e8dccaa7
CRs-Fixed: 2978262
PATCH[7/7]:
This patch consists following changes:
-Conditionally compile all monitor destination ring related code
Macro used QCA_MONITOR_PKT_SUPPORT
-Add QCA_ENHANCED_STATS_SUPPORT macro to conditionally compile
enhanced stats support
-Use QCA_MCOPY_SUPPORT and QCA_TX_CAPTURE_SUPPORT macros
to conditionally compile MCOPY and Tx capture features
respectively
-Use QCN_IE macro to conditionally compile BPR
feature
-Use QCA_ADVANCE_MON_FILTER_SUPPORT macro to conditionally
compile advance monitor filter feature
-Fix vdev attach issue for special and smart monitor vap
-Fix status ring initialization issue.
Change-Id: I0deaa28a9a54bf34b0f41e6dd510fdd8d4992db2
CRs-Fixed: 2983780
PATCH[6/7]:
This patch consists following changes:
-Move monitor related pdev variables to struct dp_mon_pdev
-Move monitor relted soc variables to struct dp_mon_soc
-Move cookie to monitor link desc va to monitor file
-Add APIs to access monitor related variables
-Add dummy APIs to build without monitor support.
Change-Id: I032a480b1383d061f984cee3ba6b10ac7a0ff350
CRs-Fixed: 2983781
Currently the EAPOL/ARP/DHCP frames arriving as 2K-jump
or out-of-order frmaes are being delivered to the network
stack, without checking for the packet-number sequence.
WCN7850 has hardware support to provide the packet number
of the previous successful re-ordered packet from hardware.
Use this feature to check if the packet-number are in proper
sequence for these EAPOL/ARP/DHCP packets arriving as 2k-jump
or out-of-order packets before submitting it to the network
stack.
Change-Id: I1078452afce4bc00b2509436295e5bd80000feb4
CRs-Fixed: 2965086
Revert "qcacmn: drop duplicated EAP frames from REO exception path",
allow all EAP frame delivering to stack including retried ones.
Change-Id: I73733841c1feb21d5b5fd160856a8fe9c21168fc
CRs-Fixed: 2959701
add ssn_updates_count to dp_soc_stats rx err stats.
Also add bar fail count on rx tid update during
bar handling.
Change-Id: Ic9a963c8d29ace2087e63cba56bc0d7e40907e1a
CRs-Fixed: 2918806
Add wbm head/tail pointer stats to dp_txrx_stats and ring
usage percentage for all SRC and DST rings.
Stats added to the following cmd: iwpriv wlan0 txrx_stats 26 0
CRs-Fixed: 2865996
Change-Id: I7d144d87c5f3485ec9ba85f50b036b69a64e53c6
In security mode, allow only EAPOL frames in receive path
when peer is not authorized. This feature is enabled per VAP
based on vdev flag and will be applicable for all peers in that
VAP
Change-Id: Ic5dea09c2083f31e8cd301a0cdc3565f247b735c
Add drop statistics for duplicate EAPOL frames received
in the REO exception ring as OOR frames. This will help
understand if EAPOL frames are getting dropped which could
cause connection issues.
Change-Id: Ib9d5a3c04ce6638c65166f02261af5c526cc47eb
CRs-Fixed: 2814633
If a continuation bit is set in msdu desc info and reported
length can fit in single buffer avoid SG processing
Change-Id: I6e8c3e1e657c372d5d915450dda20ba26bac495f
Only BAR frames with REO/RXDMA push reason as error are handled
in host. FP BAR frames without errors, are routed to host
via REO/RXDMA with push reason as route.
Instead of leaking the buffer, handle the routed BAR frames
gracefully. Free the buffer and log stats to detect such
cases.
Change-Id: I6e09e8b948d9b2d9d3de3b6558e54f0c70901c62
CRs-Fixed: 2814303
Due to recent FW changes not filtering out BAR frames, redirect these
frames to REO exception ring and handle as normal data packets.
Change-Id: I4540929fddab14de57a23f6364fc916a70057cbe
CRs-Fixed: 2795499
This change fixes the below issue.
1. Clear the histogram statistics per peer.
2. Separate out the Tx/Rx histogram prints.
Change-Id: I5fc51f6bca14dc4c615c5501441e1a6b28bb0f02
While preparing raw packets for transmission, the count
of nbuf belonging to one mpdu must be less than the
number of segments.This makes sure the frags array inside
seg_info does not go out of bounds.
Change-Id: I7fffba7f64da274aa73c558cfc63d90f4419a04d
Drop frame if it is not for the vap, to which
client is connected.
Enable this check only for ap.
Change-Id: I33d7eb79267490bdb8697e4e45f789e9f6279f0e
CRs-Fixed: 2756304
Change log level of print from qdf_err to dp_err in
dp_peer_qos_stats_notify to avoid console flooding
Change-Id: I214942135826a6b94e6cf0b34b69d2c662a35e7b
Currently the stale cookie and invalid cookie
counters are being logged inter-changeably.
Fix the logging for stale and invalid cookie counter.
Change-Id: I43346fe961ee750a3baa1bf8c2da2551fb06e973
CRs-Fixed: 2770877
Add support to update the count of number of Punctured Preamble
PPDU's transmitted by the AP.
Change-Id: Id85a490e9e80566e639f48190a96d3107c6e5c61
CRs-fixed: 2755288
STATUS_BUFFER_DONE tlv written in first word for a status
buffer indicates that DMA is done for that status ring entry.
In existing implementation, for a status ring entry if
STATUS_BUFFER_DONE tlv is not written by HW, we poll on to status ring
entry until DMA is done by HW.
During lmac reset it may happnen that HW will not write STATUS_BUFFER_DONE
tlv in status buffer, in that case we end up polling infinitely leading
to backpressure on monitor status ring.
As per MAC team's suggestion, when HP + 1 entry is peeked and if DMA
is not done and if HP + 2 entry's DMA done is set,
replenish HP + 1 entry and start processing in next interrupt.
If HP + 2 entry's DMA done is not set,
poll onto HP + 1 entry DMA done to be set.
CRs-Fixed: 2740988
Change-Id: Ieef667f0bb4a47e74fc320c93243c637409f47f0
Add debug support for VDEV refcount to take
refcount by module id and decrement corresponding
refcount with same module id
Change-Id: I15c075816994ba70155fefbc0bce208b20fb9a59
Add new API dp_vdev_get_ref_by_id() which will return vdev
pointer by holding a reference. Caller of this API has
to ensure that this reference is released by calling
dp_vdev_unref_delete() API
New lock soc->vdev_map_lock is introduced to protect
vdev id to object array
Change-Id: I883e328932e35ef31254125492dbae20cebe0e00
Add new APIs to iterate through the vdev peer list
by taking the peer reference.
A call back has to be passed to these APIs which will
be called for every peer in the lisst
dp_vdev_iterate_peer() -> iterates through peer_list of vdev
dp_pdev_iterate_peer() -> iterates through peer_list of all
vdevs in pdev
dp_soc_iterate_peer() -> iterates through peer_lists of all vdevs
in soc
Additonal APIs are added to for itearations where the callback
will be called outside the vdev->peer_list_lock, as these APIs
have additional memory allocations suggested to use only in case
the iteration need to happen outside lock
dp_vdev_iterate_peer_lock_safe()
dp_pdev_iterate_peer_lock_safe()
dp_soc_iterate_peer_lock_safe
Change-Id: I24632fe611355cc3e93b7f16d90913d4b8686ca9
Add support to get the peer reference with module id
To help debug the peer reference related issues
Change-Id: Ie20c7e710b9784b52f2e0f3d7488509282528a00
