It may return NULL, which pass to another function and dereference it.
Check return value, don't pass to another function if return value is
NULL.
Change-Id: Ib2e87231bb724c5631c12e9bee98c22d4dcc9bf2
CRs-Fixed: 2233639
Add support for ndp schedule update event and provide channel information
in ndp confirm event.
Change-Id: Ic2c073dd4f220627cc2bd1a2d52d858136b6b450
CRs-Fixed: 2180310
Add change to alloc memory for WIN specific cp stats
structures, provide get/set API in cp stats component
for other umac component, reorganize files according
to usage inclusion in other header files
Change-Id: I8b4e4435f60cc0587917ad09ac99659f83f2cb10
CRs-Fixed: 2236328
Update qca_vendor with NAN attributes for TCP/IP info for IPv6
address transport port and transport protocol.
Change-Id: I2176cede68347c92b6f4ddddadfa56b9591ff8fa
CRs-Fixed: 2244176
Address the following issues in qca_vendor.h:
CHECK: 'Minumum' may be misspelled - perhaps 'Minimum'?
CHECK: 'staion' may be misspelled - perhaps 'station'?
Change-Id: Ifbeec8544ffefa45b9b211c888e65b418695ad38
CRs-Fixed: 2241579
Update qca_vendor.h with latest NDP vendor attribute definitions
and use those definitions in NAN component.
Change-Id: I43f0457690b1c4027adcd0abe4ef2ac2a8f9b068
CRs-Fixed: 2239047
The qca_wlan_vendor_ndp_policy for the attribute
QCA_WLAN_VENDOR_ATTR_NDP_CONFIG_QOS currently specifies type
NLA_BINARY with a maximum length of NDP_QOS_INFO_LEN (255). However
this attribute is defined to be an unsigned 32 bit value, and
nla_get_u32() is used to read the value, so change the policy to use
type NLA_U32 so that nla_parse() can properly verify that the TLV
payload has (at least) 4 bytes of data.
Change-Id: Iee5b620ef199b731fc6a449d0055db328430921b
CRs-Fixed: 2237660
The qca_wlan_vendor_ndp_policy for the attribute
QCA_WLAN_VENDOR_ATTR_NDP_RESPONSE_CODE currently specifies type
NLA_U16. However this attribute is defined to be an unsigned 32 bit
value, and nla_get_u32() is used to read the value, so change the
policy to use type NLA_U32 so that nla_parse() can properly verify
that the TLV payload has (at least) 4 bytes of data.
Change-Id: I915a94e7449c2bc1abde64e2a7f5df6a58488ed6
CRs-Fixed: 2237659
The current qca_wlan_vendor_ndp_policy for attribute
QCA_WLAN_VENDOR_ATTR_NDP_PEER_DISCOVERY_MAC_ADDR uses type NLA_BINARY.
Unfortunately this type uses the len as a maximum length and not a
minimum length which means that nla_parse() cannot guarantee that 6
bytes of MAC address are present. Change the policy to use type
NLA_UNSPEC so that nla_parse() will ensure that the NDP Discovery MAC
address TLV contains (at least) 6 bytes.
Change-Id: I2c7e1efdb413dbd2f79c36ed1626c006b86e8b5b
CRs-Fixed: 2237658
Spectral scan period is not in terms of tclk periods for
generation 3 Spectral HW. It is directly in micro seconds.
Default value is 224 us. Driver needs to use 224 us as
default value. Application needs to display the unit as
tclk period till generation II and micro second for
generation III. For this driver will be sharing the
Spectral HW generation info to application as part of
the capability exchange.
CRs-Fixed: 2225740
Change-Id: Iaeda8ebb77c2a39824b5f919e8578ff4d56c1aa5
Re-factor vendor event buffer length calculation for NDP events
to a separate function call.
Change-Id: I6828067d0e81987d7c903fd7f7df05b3a4eadbe3
CRs-Fixed: 2183658
Define ucfg api to free stats_event, since it will be called from
osif and hdd.
Change-Id: Ifeea3e970ddca1ed508960c39a2a39f0ed755bd9
CRs-Fixed: 2231150
Added NL80211 testmode if directives to enable compilation when not
supporting the feature.
Change-Id: I00b8d982035b78f5893bd1bec79309c7ffa48d05
CRs-Fixed: 2231059
Check for interface name only when ndp response is "accept" from user. In
case of "reject" discard interface name provided and instead use first NDI
available.
CRs-Fixed: 2222041
Change-Id: Ib02fe7d5b93f8e388658e511317664a4999b5fa6
The service layer need not provide the iface name in the
responder request to the driver if the request is being rejected.
The service layer maps the ndp_instance_id only after accepting
the request, if the ndp indication is rejected, the user space
has no knowledge of the iface name on which the NDP would have
gotten mapped if it were successful
CRs-Fixed: 2222041
Change-Id: I94a7de0c98c14dbe2389dd8364b6dd78858a9d0a
Send correct channel list to Firmware. When cfg80211 is enabled, STA
is scanning in a set of wrong channels. When scan callback happens
from cfg80211 module the cfg80211 module gives us the channel numbers.
There are some channel numbers which are same in both 5GHz and in
2.4Ghz bands. For example, channel number 1 maps to frequency 4942MHz
in 5GHz band, but in 2.4GHz band channel number 1 maps to frequency
2412MHz. So cfg80211 may give us a wrong channel number. Since we have
the exact frequency of the channel we should use that instead of the
one given by cfg80211.
The channel object given to the driver by cfg80211 during scan callback
is the same as the one registered to cfg80211 by the driver. So we can
use the channel frequency inside the channel object for scan which is
not changed by the cfg80211 module.
Use regdb function to convert channel number to frequency while receiving
scan entries from FW. Use pdev band (5/2.4GHz) information to map to
correct 2.4Ghz/5Ghz channel frequency.
Half/Quarter rate flags in the scan_ctrl_flags are not set. Set
Half/Quarter rate flags in scan_ctrl_flags.
Change-Id: I9df8f0e90938f86f6987574f8259a5cf66b672aa
CRs-Fixed: 2180273
Move hdd_request_manager to qcacmn osif layer, which will be used
by CP_STATs component.
Change-Id: Iebf7f9d259793b56cc70c5b3f9dec14a5ef35b25
CRs-Fixed: 2220035
Based on the scan request flags from kernel, modify the
adaptive dwell time and DBS scan request policy.
In high accuracy mode, disable DBS scan and adaptive dwell
time scan mode.
In a low power/span mode, enable aggressive adaptive dwell time
and DBS scan to save power and time.
Change-Id: I23498799c05a252cbc9c9f6d50b847130dd0ceac
CRs-Fixed: 2197171
cfg80211_inform_bss_frame_data() takes an extra reference of
bss and it shall be freed by caller.
Change-Id: I6e2a37327fc369d01d237e7ff57221333709b53f
CRs-Fixed: 2205608
Add new attributes to vendor subcmd
QCA_NL80211_VENDOR_SUBCMD_NUD_STATS_SET.
This carry the requisite information to
start / stop the connectivity stats collection.
CRs-Fixed: 2168412
Change-Id: Ie8a60754780433f40ed4d103b737c5e8d4e59c28
Add vendor command that provides the current
information of WLAN hardware MAC and its
associated WLAN netdev interfaces.
Change-Id: I70ffbdf44ddc45fe606d0ad6e69f1b284cffc6fe
CRs-Fixed: 2194757
Define os_if_spectral_netlink_deinit to close the Spectral socket and
de-register the os_if callbacks
Change-Id: I3d054c2a2d630d4d959861d3620592010d04c09a
CRs-Fixed: 2186113
There are scenario where indoor channel operations
(like active / passive scan/connect/roam etc)
are not desired / permitted specially in sap case.
Hence add support of disabling indoor channel
on sap start and revert it on sap stop.
Change-Id: Id6e01534532e3076a3e662e6a4f71e8be924165a
CRs-fixed: 2161319
Add vendor wifi test config command attribute to send
addba request with user configuration and to set the
no ack policy.
Change-Id: I2afd62478961a774d16becba49889e855ecf7415
CRs-Fixed: 2196977
In existing code scan queue cleanup is done during radio detach,
leading to access of freed vdev netdev.
Extend cfg80211 scan cleanup API to support netdev level cleanup.
Change-Id: Ice6b6d262788e71c6d229ed7de6ab0e17f270b6c
CRs-Fixed: 2185302
The qdf_str APIs have recently been moved from qdf_mem. Reference the
new qdf_str.h header file where appropriate.
Change-Id: If97c9c37a7d720a7b93e50ec228da67a8e980c2e
CRs-Fixed: 2196129
A recent commit changed the return type for qdf_str_len() to size_t from
int32_t. Update call sites for qdf_str_len() to store the return value
as size_t to match.
Change-Id: Ib8bfad2c1fc7de1f6fc601d1be69e734d3a49dcf
CRs-Fixed: 2196858
Add support to send the per chain rssi to upper layer
for each beacon and probe responses.
Change-Id: Ife6cb9e8e65591baf485c54a985f84d842400321
CRs-Fixed: 2177638
RX mgmt frame is from interrupt thread, it may be access freed roc
ctx for low rate case. Save vdev id of current roc ctx in p2p psoc
object. Low log level of P2P RX and TX conf since too many output.
Change-Id: I4c944244f32b844d78bb69d66e341a1f3bf13abf
CRs-Fixed: 2180116
Add QCA vendor command and attributes for vendor specific command to
set MSDU queue depth threshold in target per peer per tid. This command
contains mac addrees, tid, update mask and threshold value.
Change-Id: Ie119ff5aa333bcffcec0850464982dec59fb6a07
CRs-Fixed: 2162455
Define new vendor sub command for configuring the device with
wifi test configuration. Add new test config attributes for this
sub command that are used to configure the device for testbed
configuration.
Change-Id: Ic866d54ba528525c94bcc7b4a5a8cf9c5c1408d0
CRs-Fixed: 2186214
-Initialize the default Configuration as
gen2 for spectral module on MCL.
-Add support to general netlink socket.
Change-Id: Iab06f66d18c4791f0ff5483781634df2a7268ddb
CRs-Fixed: 2183870
Spectral Netlink related APIs are currently present in
target_if layer, move them to os_if layer.
Change-Id: I86a5495f6ec8aa85a2e9639902503a522b023f8e
CRs-Fixed: 2151548
