Add the following fields in Radiotap header:
Antenna noise (in dBM)
Vendor Namespace containing the following information
->L_SIG_A
->Device_ID
->L_SIG_B
->PPDU_START_TIMESTAMP
CRs-Fixed: 2285143
Change-Id: I977be73778ab27383f12214c73b56c9b80d9f02d
Add change for disconnected peer stats ,
will remove from bss_peer
and will store in vdev, bss peer will have only multicast
stats for connected and disconnected peer.
Change-Id: Id294d1f3218dbfabcc252bac04f1a3e5f543a247
CRs-Fixed: 2290723
Currently aggregate vdev/pdev is missing nawds mcast drop
counter, add nawds mcast drop counter from peer
Change-Id: If1e2296c30cfcb5689449c8e23317282e5dce1c6
Clean up datapath component prints by correcting trace levels for
regularly occurring prints and removing newlines from converged
print APIs since qdf_trace_msh appends them by default.
Change-Id: Ie8fe319fcb737720f7400a165e134b6a18bd15b5
CRs-Fixed: 2243843
There are some particular PPDUs which have preamble only:
* NDP frames
* TB_PPDU frames
Add support to the above frames.
Change-Id: I7022433d3765575eaf28d7baf3a11e8b6ce13890
CRs-Fixed: 2275161
1. Allocate and Initialize host and target copy engine configuration
for QCA6390 based products.
2. Setup Copy engine service map for QCA6390.
3. Add conditional compilation flag QCA_WIFI_QCA6390 to support
QCA6390 based products.
Change-Id: Ia4dd4d436b8ecae0e9f91faa0c1fe7dbd14f001f
CRs-Fixed: 2259312
Move rate table API changes from umac to common
data path in order to make the APIs available
throughout the driver.
Change-Id: I1a8aeb3b73ca9df3ab7535c23c8b7e02e6af13de
CRs-Fixed: 2286841
Add NULL check before dereferencing pointer in TKIP demic function
in RX defrag path.
Change-Id: Id13f91409c2891ae833e58e4c9d9d09231682f8a
CRs-Fixed: 2287517
ba_window_size_valid and ba_window size support is missing
while sending wmi_peer_reorder_queue_setup. This is needed
for handing 256 BA which is not FW default.
Change-Id: I3218921c48c0f82225b7992076e73ac0acf7bd11
CRs-fixed: 2285423
Populate the RSSI value for the non associated clients
added in pdev->neighbour_peers_list from monitor status
ring
Change-Id: I509d06bec6eafe8377681c8a3da9a64f301c3c73
CRs-fixed: 2286571
Add new ast_get_type API for DBDC repeater feature.
Add other changes required in WDS and MEC handling
required for DBDC repeater feature to function properly.
Apply sta kickout logic to handle roaming cases
only within same radio. For roaming across radios, DP should
rely on control path.
Change-Id: If9b35720082dd87de40827843a14238e818bc454
Move the state to in_progress when we process addba
request and upon tx comletion of addba response, move
the state to active. Any addba request received during
in_progress is ignored and reo queue is updated with
window size 1 and set to inactive.
Change-Id: I69cfbc162d873f9e6842ca3e7971146dafba2695
Crs-fixed: 2188927
Return NULL peer in case an invalid peer->local_id is passed to the
peer_find_by_local_id API. In case this peer is already deleted,
the local_id may be invalid, hence simply return a NULL value.
Change-Id: I0cbae4138daa643dfa07b88caf6f32d3948d6d42
CRs-Fixed: 2280399
Disable m_copy/enhanced_stats feature causes the bpr feature disable.
Hence add check for bpr feature status during enable/disable of m_copy
and enhanced_stats.
CRs-Fixed: 2275686
Change-Id: I5592b422823446374ce560fe3653990be4c796b0
The current Lithium DP configuration items are hard
code and cannot be configured for different values
without rebuilding the driver
Add the INI configurability option for the Lithium
DP config parameters
Change-Id: I30012903ccb0654bdff706beff80655313aca289
CRs-Fixed: 2246404
Add CDP API's for following:
a. get peer stats
b. reset peer stats
c. get vdev stats
d. update pdev stats
e. reset ald stats
Change-Id: Id6884dcab2eaf9227027d227b6c68bbff9dbb7f6
CRs-Fixed: 2283286
To consolidate the stats spread over across UMAC, OL_IF
layer and process at respective datapaths depending
on platforms.
Change-Id: I87d02c767a309e7aeef88a124567259debc1bba5
CRs-Fixed: 2283286
This change Adds a per-radio command to calculate and fetch
radio activity factor from the driver.
Change-Id: I209a4d93889925b63969d36877127e2a72de25fe
CRs-Fixed: 2266783
Existing antenna gain command does not take odd antenna gain value that is
gains are not supported in steps of 0.5db. antenna_gain_half_db pdev
param provides this support. Added WMI and CDP changes to configure/read
this data.
CRs-Fixed: 2024854
Change-Id: I47da9eed74a1a0180cefb4c3f47bc4340da1bdfd
In existing code peer's mac address is populated in tx_capture
receiver address field. In case of multicast and broadcast packets
the packets is transmitted on BSS peer so in case of broadcast/multicast
packets the transmitter address is same as receiver address in tx_capture
header.
Add change to populate receiver address field with ethernet destination
address in case of bss peer is tranmit status.
Change-Id: Ie9495d51391454313b1697ecedb8e8dec0459565
CRs-Fixed: 2261473
Currently, monitor mode mask is being set while in interrupt mode. If
monitor mode rings are being processed in timer context(polled), both
timer and RX softirq end up processing monitor mode rings leading to
race condition. Monitor mode ring processing code is written to be
executed by a single context - either timer or softirq, not both.
Add an API to return zero monitor mode mask while in interrupt mode in
case timers are being used to process monitor mode rings.
So, in case packet log is enabled(based on a timer), regular interrupt
processing will not process monitor mode rings. It would be
done in a separate timer context.
Change-Id: I5cf5c881c2e2e07bac1b46646ee2a3b7cf42ef13
CRs-Fixed: 2266353
Removed qdf exports on functions defined in target specific
header files and defined those functions as static. Revert
changes on hal_rx_msdu_end_sa_idx_get and make
hal_rx_msdu_end_da_idx_get target specific
Change-Id: I2858b1d77118f0a26b54bf983bd342c7a4fe757d
make hal_rx_msdu_end_sa_idx_get and hal_rx_dump_msdu_end_tlv
routines target specific as qca6390 implementation differs
a bit. add target specific functions for qca6290 and qca8074
Change-Id: Ie05b91d965bae3642e3264620c6d8427ad368044
macros and fw cmn headers included in hal_internal.h is moved
to a new hal_hw_headers.h to avoid these getting included in hif
layer. Include the new hal_hw_headers.h file
Change-Id: I3390ae9e71ca561d94a265e1fdf4d9354e7b2474
Create separate individual hal_srng_table and hal register
offset in target specific source files. Create separate
functions for qca6290 and qca8074 for few hal rx tx
functions as the macro value differs between the chipsets.
Assign target specific hal tx, rx ops as part of hal_attach
and call respective hal tx, rx ops through callbacks.
Change-Id: Ibbf490c678c39fdd9d54191aad7aaec786db30ec
OL_ATH_PARAM_CBS - Command to enable/disable CBS
OL_ATH_PARAM_DCS_SIM - Command to simulate DCS interferences
OL_ATH_PARAM_CBS_DWELL_SPLIT_TIME - Command to configure
Dwell Split time
OL_ATH_PARAM_CBS_DWELL_REST_TIME - Command to configure
Dwell Rest time
OL_ATH_PARAM_CBS_WAIT_TIME - Command to configure CBS wait time.
OL_ATH_PARAM_CBS_CSA - Command to enable channel switch with CBS.
Change-Id: If1c45c7caa53da7f05e56f23c74cf1b982ea8f48
CRs-Fixed: 2134748
Account for tx.success and tx.comp_pkt stats counters
at peer level and propagate them to pdev level.
NSS stats need to be updated for all packets.
Change-Id: I18de95217690c9234060253671e0d5e1ef295e2a
CRs-Fixed: 2270816
Add cdp ops for timestamp setter/getter function for peer based on
mac address.
Change-Id: I7025fdd7540f47bb4d3f95ef6d9f2ef92af5f1f1
CRs-Fixed: 2275985
AST entry has been allocated at the time of peer creation at DP.
But during peer delete it is not deleted. This leads to memory leak
in the wlan driver. To fix this delete ast entry at the time of
peer deletion.
Change-Id: I8d16b575bd44bf06415c3b1cc44c1c7833c88137
CRs-Fixed: 2273601
Reverting the change where mgmt ctrl frame buffer was assinged NULL for
NONTLV payload case as this check is handled later in the same path.
Change-Id: Icccfb401fe34da593198bac27650139654021636
CRs-Fixed: 2276923
Setup monitor mode rings and allocate
descriptors only if QCA6390_MONITOR_MODE is
defined.
Change-Id: I9c9bdc1e325eda822a326d64d6445a7112083420
CRs-Fixed: 2271998
Add and initialize UMAC peer handle into DP peer structure as opaque
and to pass UMAC node structure to ol if layer for Block Ack and
rx_frag_tkip_demic functions.
Change-Id: If7c3faf859c97832c3c7f50fc163142b68eedeeb
CRs-Fixed: 2241356
Move few common dp_ol_if_ops functions to target_if layer as part of
DP-CP interaction convergence
Change-Id: I9ad740af687f550f64ef8f81919159b73204e7b8
CRs-Fixed: 2243694
In existing code, variable used to track mgmt. and control
TLV is getting reset only in success case.
Add change to reset it appropriately.
CRs-Fixed: 2248313
Change-Id: Ieac5dc215f441b0530013ea1e36abcba19294754
There are two instances where peer ref counting leak has been observed
1) When DUT-STA is connected to AP1 and if it tries to roam to AP2 or
to same AP1 then as part of roam sync indication, it needs to delete
the old peer and create the new peer. Deletion of old peer is
happening through force delete operation which is No-OP for some of
the platforms. In such cases, do normal peer delete operation, so
that peer ref count can be deleted properly.
2) When looking up peer by its associated vdev, driver goes one by one
all peers and check their associated vdev and compare with given
vdev. If it doesn't find the match then it returns without releasing
the reference count.
CRs-Fixed: 2263607
Change-Id: Ibcad72943258e531e29498961d3d7e692fd05b36
structures
Rename osif_pdev to ctrl_pdev and os_if_vdev to ctrl_vdev in dp_pdev and
osif_dev structures respectively which are
pointing to objmgr_pdev and objmgr_vdev structures to maintain
uniformity
Change-Id: Ida95a1a90ea74513573f00c652338baee3df897a
CRs-Fixed: 2241362
Direct Buffer Rx module has an API to print the status of the rings
per module per pdev. Introduce OL param to support this through
CLI.
Change-Id: Iebbd2c314e72dc0753cdcb581f17d93d3c71a5db
CR-Fixed: 2263968
