The kernel-doc script identified some documentation issues in
components/target_if, so fix them.
Change-Id: Id925b899074b1e9491cc3b9a3066420512459770
CRs-Fixed: 3359868
Currently host sends many pdev/vdev set param
commands separately to firmware from hdd.
Combine multiple pdev/vdev set params and
send to WMI to reduce number of transactions.
Also replace target wmi pdev/vdev params with host wmi
pdev/vdev params to fix existing broken layering
violation.
Change-Id: Ib76f5bd5f582a2c67486f6773ff6fd486b3d84cf
CRs-Fixed: 3333732
Firmware sends NAN log events to driver and these are logged
with info level to capture complete NAN state machine logs in kmsg.
Currently, these events are received/processed in soft IRQ context
and causes performance issues as logs introduce delays. Move the
event registration to RX_WORK context to avoid delays.
Change-Id: I15ba20059f55f002cfe276d62e68e3cc09136a23
CRs-Fixed: 2960359
Change return type of following APIs from int to QDF_STATUS.
wmi_unified_register_event()
wmi_unified_register_event_handler()
wmi_unified_register_raw_event_handler()
wmi_unified_unregister_event()
wmi_unified_unregister_event_handler()
Change-Id: I534b499edbcfec6eddea0e9ed48f9eb1a2e872c8
CRs-Fixed: 2791275
qdf_mem_malloc() function already takes care of logging the
caller function name and line number in case of any allocation error.
Hence there is no need to add the error log again.
Getting rid of these unnecessary logs reduces driver memory footprint.
Change-Id: If0b9425f82f9ed793c7639c0ed09eb1f868b6d5c
CRs-Fixed: 2781932
NAN protocol runs in firmware and controlled by framework.
Framework configures multiple NAN discovery params while enabling
NAN. Framework configurations would be based on the framework
constraints or realtime scenarios like resource(memory/power/..)
consumption. But some of these params might need to be controlled
explicitly based on the usage.
NAN DW is one such parameter, which is configured as 4 seconds
when the device is in sync role and the screen is off. But
for some usecases, this param might have to be 512ms always
irrespective of screen off/on for some targets. Add an ini param
"nan_feature_config" to set a bit to indicate firmware whether to
honor framework configured DW value or the firmware default value.
Send the vdev param on NAN supported vdev by setting the "bit 0"
to indicate firmware to allow framework configured DW value.
If this bit is not set, firmware shall consider its default value.
Change-Id: I0476bca2bbe676beccfff207f5b4ea31e89031e2
CRs-Fixed: 2721970
Update return type of target_if_nan_event_flush_cb to return
QDF_STATUS to match scheduler_msg_process_fn_t.
Change-Id: I2f0380edeb21a1c6016358725abab39fdc741466
CRs-fixed: 2698302
Add support for the following NAN messages in kmsg:-
1. NAN enable status
2. NAN, NDP match events
3. NDP channel info.
etc.
Change-Id: Icbf8f4ed05a7bd181a076d526dd2e01d70be6b05
CRs-Fixed: 2618835
NAN Datapath implementation allows more than one concurrent
NDI's to be active at the same time. But this isn't supported
if there is a higher priority incoming connection such as
STA. Add modules that check for unsupported NDI concurrency
and initiates termination of all NDP's on it.
Add modules that check and disable unsupported NDI concurrency.
Change-Id: I6ad9afbfc41beda1d1c8f31bf58a8ea70027f5ca
CRs-Fixed: 2407215
NAN component has been moved to CLD. It includes implementation
of the new NAN command QCA_NL80211_VENDOR_SUBCMD_NAN_EXT.
Change the legacy NAN implementation of vendor cmd
QCA_NL80211_VENDOR_SUBCMD_NAN so that the requests go
through the NAN component. Clean up the legacy path.
Functionality remains unchanged for legacy command.
Route the legacy NAN commands through the NAN component.
Change-Id: I542e5afe832619f8c088220cc4456aa7fe4416fd
CRs-Fixed: 2356772
As part of supporting NAN DBS, new WMI TLVs are defined so
that Host can maintain the status of NAN Discovery in sync
with the Firmware. Add modules that process these events and
updates the NAN states.
Add support for handling the NAN events.
Change-Id: Icfcd9c33cc410d9a65140f63cac69ddd69742306
CRs-Fixed: 2355383
Add changes in the NAN component and Target IF to support the
NAN Enable and Disable commands. Add changes to support all
the other generic NAN commands as well. Add a state machine
to keep track of the status of the NAN Discovery in the Target.
Add support for the NAN Enable/Disable commands
Change-Id: I20c303cad8b7a30deba50345032b33b1deba4802
CRs-Fixed: 2338054
NAN related OS IF, Target IF and component files have been
merged into CLD. Add Makefile changes, include correct
files, replace lmac tx/rx ops with the new ops and call
updated API's such as init/deinit.
Complete the remaining changes for moving NAN component
into CLD.
Change-Id: Idcf8816337aa49b399596ce3cdfc9cdab811d386
CRs-Fixed: 2338060
NAN component is not needed in the CMN repo. To reduce the
unnecessary lines of code, merge the NAN related Target IF
files from CMN into CLD. Subsequently remove these files
from the CMN repo.
Merge NAN related Target IF files from CMN into CLD.
Change-Id: I02475f1e1a3a90280bb9da0f131ba34bb189f5b3
