To assist the Host in ML reconfiguration element construction for probe
responses, FW sends MLO link removal information as part of the MGMT Rx
event containing the corresponding probe request. This information is an
array of TLVs, one TLV for each link that is undergoing link removal from
the MLD for which this probe request is intended. The TLV carries the link
removal TBTT countdown value maintained by the FW for that link.
Add support to extract the same.
CRs-Fixed: 3335361
Change-Id: I16c6791a443ddb166da596d404a52ff2a38da291
WMI_MLO_LINK_REMOVAL_EVENTID will be sent by FW to update the Host on the
progress of the link removal operation. Add support to process this event.
Change-Id: I0c4d5b047cf062b421380f85717fac5a9bdea9c2
CRs-Fixed: 3334950
WMI_MLO_LINK_REMOVAL_EVENTID will be sent by FW to update the Host with the
progress of the link delete operation. Add support to extract the TBTT
update TLV sent in this event.
Change-Id: I01ce710d282f16e7a7cf4fb767279661558d129f
CRs-Fixed: 3322714
WMI_MLO_LINK_REMOVAL_EVENTID will be sent by FW to update the Host with the
progress of the link delete operation. Add support to extract the fixed
params TLV sent in this event.
Change-Id: Ic42a822339363b1347ae174926a4dac19eef3f99
CRs-Fixed: 3318005
WMI_MLO_LINK_REMOVAL_CMDID is to be sent by the Host to initiate the
removal procedure for a given link from its MLD. This command will be sent
on the impacted link only. Add support to populate and send this command.
Change-Id: I8485d8c8897bb2bb891d50546d5fbfac2a69a4ce
CRs-Fixed: 3314430
For SAE-EXT-KEY AKM with group-21 pwe, the PMK
length is 64bytes. Therefore, increase the max
size of the PMK to 64bytes in host to facilitate
PMK storage and PMK offloads.
Change-Id: I049cd14c1c71e1809b394199862409780a16371d
CRs-Fixed: 3353114
Add the service bit wmi_service_wpa3_sha384_roam_support
used by firmware to indicate the roaming support for
WPA3 SHA384.
Change-Id: I4bb4f9fd83085c48c646818124265486bae62c0c
CRs-Fixed: 3334343
Add API to parse the TID-to-link mapping event ID for the AP vaps.
As part of this event,
- Update the mapping switch time TSF value in host data structures.
- When mapping switch time or expected duration expires in the FW,
update the host data structure.
Change-Id: I93232429fe5c2aa12dc4bf9f6a2f014761b7df15
CRs-Fixed: 3350697
Add support for vdev level WMI Command and event to send
and receive t2lm ie info
CRs-Fixed: 3339695
Change-Id: I8b896a961cba8f1d8e11111f900a98da090b9513
Currently if ENABLE_HOST_TO_TARGET_CONVERSION is defined,
host pdev/vdev set params can be translated to
target pdev/vdev set params through APIs
convert_host_pdev_param_tlv,convert_host_vdev_param_tlv.
If ENABLE_HOST_TO_TARGET_CONVERSION is not defined,
host pdev/vdev set params in
common code is sent to firmware directly, which is incorrect.
Define pdev/vdev set params in such away they represents
host params on ENABLE_HOST_TO_TARGET_CONVERSION enabled and
target params on ENABLE_HOST_TO_TARGET_CONVERSION disabled.
Change-Id: I5718c76c351b2d7904d8bf8b603073ffcb0a039d
CRs-Fixed: 3321556
Add changes to indicate ongoing critical update CU flags and
BPCC values in probe and assoc/reassoc response.
For beacon FW update the CU flags and BPCC values in impacted
and partner links and keeps the latest copy of BPCC for ML VDEV.
The similar CU indication needs to be considered for probe,
assoc/reassoc response.
FW indicate to host the ongoing CU flag within DTIM interval for
impacted, and latest BPCC values of AP MLDs in impacted
and partner link VDEVs as part of mgmt_rx_event.
Extract cu_vdev_bitmap and bpcc values CU information from
wmi_prb_tmpl_ml_info TLV for probe and assoc / reassoc request.
Pass these values to umac, mgmt and ol layer as part of rx status.
Refer these values to update CU flag in capability information,
and BPCC values to update BSS Parameter Change Count in RNR,
MLIE and per sta profile.
CRs-Fixed: 3301916
Change-Id: I92ededb6598f85f3ea21b9d5e69d182c6180e30d
Add common code to configure target AFC flags:
enable_6ghz_sp_pwrmode_supp, afc_disable_timer_check,
afc_disable_request_id_check.
Remove cfg_get set is_afc_reg_noaction code, add it to psoc regulatory
private data.
Add APIs to set and get these AFC configures.
Change-Id: Idf74b245113eee18b071a7fbb92bb151cd535ce8
CRs-Fixed: 3154185
Critical update is the explicit signaling for STA to notify
any change in BSS param.
Present support is there for beacon, host notify to FW by
updating current link CU param in wmi_bcn_tmpl_ml_info TLV
of BCN TMPL CMD by setting the corresponding cu_vdev_map
for category 1 / category 2 based on change in critical
update params of ML VDEV.
The same Critical update signaling is extended to 20TU
unsolicited broadcast probe response.
In 6 GHz link host notify the same category 1 / category 2
cu_vdev_map critical update params of ML VDEVs in 20TU
enabled group wmi_prb_tmpl_ml_info TLV of WMI_PRB_TMPL_CMD.
CRs-Fixed: 3314429
Change-Id: I84dbd1901c5a3f2ef28f981c581fd7350d147829
In the current implementation, the Direct DMA completion event is getting
processed in the tasklet context. When the Direct DMA events land on the
same processor core as the one used by the WLAN data path events, the
Direct DMA events can pre-empt the data path events as the datapath
events usually run in NAPI context. This could impact the data path
throughput when there is a high volume of frequent Direct DMA events. To
fix this, Direct DMA events can be run in work queue context based on
user configuration. Add support for the same.
Change-Id: I1a89b185c6765addc7ee725e9324025f0318d9ed
CRs-Fixed: 3276157
Add WMI support for WMI_SERVICE_EIRP_PREFERRED_SUPPORT service bit,
which indicates that the target prefers EIRP in the
WMI_VDEV_SET_TPC_POWER_CMD_ID.
Change-Id: I1433bd698e124336082e12f509f271c9dd7df40a
CRs-Fixed: 3307372
On the initiator side, Host needs to send
WMI_VDEV_ADD_MAC_ADDR_TO_RX_FILTER_CMDID to firmware before sending the
PASN Auth frame. Hence, move send_set_mac_addr_rx_filter_cmd_tlv() from
wmi_unified_p2p_tlv.c to wmi_unified_tlv.c file.
Change-Id: Ia5517dbdd5ec46f611537b12b7046e3a9d859082
CRs-Fixed: 3304909
Currently host does not update band capability to fw as
part of feature set info.
With this change update band capability as well as part of
feature set info.
Change-Id: I09982f2f1b7b831a62f6f4db97691aeb4a4fb894
CRs-Fixed: 3303427
Based on the new requirement, fw fills the tx rate count and
rx count per mcs index in the peer extd stats event.
Add logic to parse tx rate count and rx rate count from peer
extd stats event.
Change-Id: I13382366f52964b83eb26473fa03267ac7309bb9
CRs-Fixed: 3289779
Currently if ENABLE_HOST_TO_TARGET_CONVERSION is defined, WMI_HOST_PEER_*
can be translated to WMI_PEER_* through API
convert_host_peer_param_id_to_target_id_tlv.
If ENABLE_HOST_TO_TARGET_CONVERSION is not defined, WMI_HOST_PEER_* in
common code is sent to firmware directly, which is incorrect.
Define WMI_HOST_PEER_* to WMI_PEER_* if ENABLE_HOST_TO_TARGET_CONVERSION
is not defined. Then WMI_HOST_PEER_* can be used in common code.
Change-Id: I50aa604d8822a81eed223c8551e542007929424e
CRs-Fixed: 3271470
Adding feature flag for Health Monitor so that it can be disabled
for 16M and 256M profiles
CRs-Fixed: 3277434
Change-Id: Ibbbe582acd15ebff7e189fcbaa36429ea519db37
FW-Host Handshake for BANG_RADAR_320_SUPPORT
1. FW advertises its capability of processing BANG_RADAR_320_SUPPORT
id via wmi service bit 'wmi_service_bang_radar_320_support'.
2. If the host is capable of processing the "BANG_RADAR_320_SUPPORT"
event id, host sends the capability in WMI_INIT_CMDID setting a bit in
host_service_flags
Change-Id: Ia26a7b8e8ee78aceb801d0053770379bd6d5a9cb
CRs-Fixed: 3270525
Update peer_chan_width_switch_info as per latest
fw common header file to include puncture parameter.
Change-Id: I1a68991ed8b9c653d31c4bc0c3ad3660d1104de3
CRs-Fixed: 3278709
Add API to extract MLD AP MSD capabilities from MLO IE
common info field if present. This will be shared with FW
via peer assoc cmd.
Change-Id: I0ebcd5408a40f3314932d4a2a7e586c208af2ee5
CRs-Fixed: 3271118
Remove unused param key_rsc_counter of set_key_param
structure, as key_rsc_ctr is used to send key rx sc
counter to fw and rename key_rsc_ctr to key_rsc_counter
as win is using key_rsc_counter.
Change-Id: Id58aabb30d772f8f620ac9f96890fcac0193777b
CRs-Fixed: 3256574
Currently host sends many vdev or pdev set param commands
separately to firmware.
Combine all vdev or pdev set params together where ever
possible, send to WMI.Based on service capability
WMI_SERVICE_COMBINED_SET_PARAM_SUPPORT, host decides whether
to send all set params to firmware at once to reduce number of
transactions or need to follow legacy way i.e send params
separately one after the other.
Change-Id: I0a36dd66a7ccb27f2ecd437cf7b9d08667e27472
CRs-Fixed: 3151418
Based on new requirement, driver needs to send feature set
information to fw as part of wmi init command.
With this change, fill the feature set info in feature set bitmap
and send this to fw with wmi init command.
Change-Id: Ic405c7e8e5ddd1399deacfaab240e979468c53c2
CRs-Fixed: 3262862
Call UMAC reset initialization API from soc_attach_target().
FW exposes a service bit for this feature, use that to conditionally
enable this feature. Also, add default log levels for this feature.
CRs-Fixed: 3253464
Change-Id: Ia7c9cf07a7ab7b000ebe452ab074a82173b70129
If found rx link speed change from good to poor, or poor to good, need send
to F/W. It may happen frequently. To avoid power side effect, send to F/W
by QMI instead of WMI.
Change-Id: I2e7ddd3ae539257c6b195cb13da221f886debbba
CRs-Fixed: 3255042
Extract EML and MLD Capabilities from Target via
wmi_service_ready_ext2_event. These values can be
used while advertising EML and MLD Capabilities.
Add helper function to get EML related delays in
Micro Secs from values got from EML and MLD advertisments.
Send EML Capabilities received from node to Target
via WMI_PEER_ASSOC.
CRs-Fixed: 3225495
Change-Id: Ibfa2ff8dbf11d4293125331376a7986e611d5f63
WMI_SPECTRAL_CAPABILITIES_EVENTID event will be sent by the target SW to
indicate the different capabilities of the Spectral HW.
Add support to process this event and extract the capabilities.
Change-Id: I03b3236b6def98d24e77b2a9ea51ee866e62e6fe
CRs-Fixed: 3238450
Add infra to support Dedicated Bluetooth Antenna Mode (DBAM)
feature. It is used to switch between dedicated antenna for
BT and shared antenna for WLAN and BT.
Change-Id: I21688093674ef9b63ee811df9168a31bd71c56b5
CRs-Fixed: 3239895
Rate-limiting will be based on number of beacons received.
When the beacon is not from connected AP, the beacons
are dropped on a percentage of received beacons and
rate limit, which is configured by the user.
CRs-Fixed: 3230508
Change-Id: Iac591c37129fda6923ef254c2950cb0bdbb44ce9
