1. Replenish path issue:
a. when number of required buffers passed to replenish API is '1',
host does not replenish '1' buffer.
b. If no. of available entries in ring are '0', return sw desc
back to pool.
2. 32-bit compilation issue
3. Block ppdu desc deliver API when pktlog is enabled for BE
Change-Id: I79ebf1f84830b4c2f5e5b727e3e08c5ee1870898
In WIN BE chipsets, replace the REO tid
queue programming in FW via WMI with writing to a
Host managed table shared by HW and SW. REO HW will
pick the tid queue address from the table indexed by
peer id and tid number.
Change-Id: I8107ca5116425538329b11ae3519f02b32573bac
Enable the 4th Tx. completion ring to save CPU load
Initialization and interrupt handling for 4th completion ring
is done here.
Change-Id: I2db27218a3c3e14d719d012f03454a6a7aa647fe
Add function pointers to free buffer address stored in status buffer
and support tx monitor in legacy and Waikiki flow.
Change-Id: I28612d388009292ff751fe514183fb801909f485
Currently window register accessing with PLD lock is not enabled for
HIF path of KIWI, enable it so there is no race condition with HAL
register accessing path.
Change-Id: Iceeba36ca6febdeca0e7f7bc0dcb7d4adc17bc51
CRs-Fixed: 3110425
HAL changes to populate agc gain, CFO, rx_start_ts, mcs_rate and
gi_type to CFR info for QCA6750.
Change-Id: I164324b1e929399a8dacf88f3012970c65d5d653
CRs-Fixed: 3115256
Fix compilation error when monitor mode files are not present
and QCA_MONITOR_2_0_SUPPORT is disabled.
Change-Id: Ia70976a89c0ca2349cf744c23a68b3004cbd3325
CRs-Fixed: 3117582
DMA unmap for scatter gather packets is done using
only frag0 dma address and the entire packet length
which will lead to incorrect behaviors. Add handling
to do dma unmap for all the fragments of SG packets.
Change-Id: I614553d9f96c573f0095c9be38706fd4ac3223ab
CRs-Fixed: 3112424
The compiler removes unreferenced TCL_DATA_CMD struct from the
object file. Hence this cannot be parsed in the dumps. This fix will
inform the compiler to retain the structure.
Change-Id: I6bc12893769f17dc3f51130b7e947f62b1bd3ea9
CRs-Fixed: 3105021
PHY related info. has been updated when processing PPDU status
in Monitor mode, but it's got overwritten uncorrectly when
processing RX_MSDU_START TLV in VHT mode. Change aims bypassing
the wrong update, when it's working in VHT mode.
Change-Id: I2c78db66bc7222e3eebf052fb6e57d6f9d859286
CRs-Fixed: 3108059
- Fixes for compilation issues after enabling
monitor 2.0 support.
- change copyright year for all files in the chain.
Change-Id: I885e257bd8ca83850656d8a1f408c1bc34920d7a
CRs-Fixed: 3086483
Add the PPE Tx HAL data structures. Also add
dummy functions for reo2ppe and ppe2tcl rings
intializations.
Change-Id: I31fa61a728535c32ea3678407da8ae39f0d9f48d
FISA is not supported by qca6390 and hence there are
compilation failure in FSE access.
Fix these compilation issues for qca6390.
Change-Id: I611b7e2068ad260a41add9b8bd5ab7a5345e8152
CRs-Fixed: 3103337
In qcn9224, NAWDS Learning repeater mode will receive packets
with reason as HAL_RXDMA_UNAUTHORIZED_WDS.
Change-Id: I6fe8428a5f8e2bac0e1db45b87169db0bd4cc271
For KIWI target, 64-bit timestamp is reported
in the PHY TLVs. use the first 32-bits timestamp
value for the radiotap header.
Change-Id: Ia7d7a6913e4cdca3a1432cc5edbb0348ec8a6857
CRs-Fixed: 3096680
For Kiwi, if UMAC force wake is enabled, HIF window register
support is needed as well. currently hal_soc->init_phase just be
true for a very short periord, this lead to hif_force_wake_request
is called frequently when configure register during initialization,
this is not necessary as pld and device is not in power collapse
state during this period.
Enable HIF window register and increase init_phase true period
Change-Id: I0b5394bbc1ca73d20b2fcabbf2a261e6f8335626
CRs-Fixed: 3097991
In WCN7850, the tlv header width is 64-bit and the tlv header
start is 8-byte aligned inside the monitor status ring desc.
Add changes to parse the monitor status ring TLV according
to the TLV header width.
Change-Id: I19860b871abbc3037174b9d0ae5ed6e52b1eb736
CRs-Fixed: 3084443
Add 2 hal soc ops, hal_msdu_desc_info_set and
hal_mpdu_desc_info_se for berilliyum datapath.
Attach hal_rx_msdu_ext_desc_info_get_ptr_be to its function
pointer.
Get reo queue descriptor address as a 5 byte value as in
beryllium datapath it is being obtained from rx packet tlv.
Change-Id: Ia58597384e1a3d5eec493b865a88bab4f209502d
CRs-Fixed: 3084532
Use the tracepoints to trace delayed register write, ce
tasklet scheduling latency, tx, and rx packets.
Change-Id: I63a89276177a9d0466dcb0c831eeb8e938a2bf79
CRs-Fixed: 3081870
Use chip ID and destination peer to determine the target soc
and partner vdev for Intra-BSS in MLO case.
Change-Id: I709c52e74426c5e81b50c8063cad7669c0e7002d
HAL changes to populate agc gain, CFO, rx_start_ts, mcs_rate and
gi_type to CFR info for QCA6490.
Change-Id: I6f6f47c87d40bd661162f764fb3a360230a56457
CRs-Fixed: 3086667
Offsets used by host for HTT stats are not aligned as per the
structure declaration given in file htt.h .
Make change to use the correct offsets to get the correct stats.
Also make change for byte count computation.
Also make cleanup changes for FR65817.
Change-Id: I8bc6164cc4994c49536d7277779f25b258be1592
CRs-Fixed: 3082742
In BE architecture, HW provides basic vdev stats support for upto
48 vdevs. For each vdev, there is vdev_stats_id which represents the
id of this vdev on HW. This vdev_stats_id is assigned by host and
is conveyed to HW at the time of REO TID Queue setup for the peer.
Add logic for allocation and deallocation of vdev_stats_id and
convey this id to HW.
Change-Id: If5611bf54d057ccf71c6444b5c79a26eb28df87e
CRs-Fixed: 3067843
In hal_delayed_reg_write change the order of
hal_is_reg_write_tput_level_high and pld_is_device_awake check. This
ensures that throughput level is checked before checking for device
wake state. This is beneficial in saving CPU cycles in high throughput
scenarios.
Change-Id: I23d0bde46779df9dca4388bf67c9395999274f3a
CRs-Fixed: 3078096
Rx patch changes for multichip MLO
1. Create ini for rx ring mask for each chip
2. Configure hash based routing for each chip based
on lmac_peer_id_msb
3. Peer setup changes to configure lmac_peer_id_msb
to enable hash based routing
4. Rx Replenish changes to provide buffers back to owner
SOC of reo ring
Change-Id: Ibbe6e81f9e62d88d9bb289a082dd14b4362252c4
Changes needed for MLO soc attach to pass chip_id,
dp_ml_context from upper layer.
This change also takes care of assigning appropriate
RBM id for IDLE link descriptors based on chip_id.
Change-Id: I8f5f08c524d91942e6e458f048700b7bdd900107
Prefetch RX HW desc, SW desc and SKB in pipeline
fasion in the first loop of RX processing.
This has improved TPUT by 200Mbps and provided a
10% gain in CPU (single core)
PINE with other optimizations: 3960Mbps @ 100% core-3
PINE + pipeline prefetch: 4130Mbps @ 90% core-3
Change-Id: I47f351601b264eb3a2b50e4154229d55da738724
Added an API to do a batch invalidation of REO descs
saw an improvement of 40 to 45 Mbps.
Note: this change is applicable only for cached
descriptors
PINE with Default driver: 3189 @ 100% core-3
PINE with skb prefetch: 3469 @ 100% core-3
PINE with skb pre + batch inv: 3506 @ 100% core-3
Change-Id: Ic2cf294972acfe5765448a18bed7e903562836c3
Increase the max WBM2SW release rings for qca6750
when multiple tx ring pairs support is enabled.
Change-Id: Ifa3be25a7c9b7cb019165e76b3a71d3db9572334
CRs-Fixed: 3075392
tcp_proto is not set correctly from hal_rx_get_proto_params() API,
currently it is using HAL_RX_TLV_GET_IP_OFFSET, use
HAL_RX_TLV_GET_TCP_PROTO to fix it.
Change-Id: I1f3c6aa4b8f5420f176bda4aff158dcfa2a7ef5a
CRs-Fixed: 3073794
In WBM error processing read peer_id from peer_meta_data
instead of sw_peer_id.
This changes is needed because we need to process Rx packet
on ML peer. But in MLO case sw_peer_id field contains
link_peer_id where as peer_meta_data has ml_peer_id.
Change-Id: I3f469adfdf7efa88cb081e94fa9fe0c54c1fb078
The maximum WBM2SW rings in whunt for HSP is 5 and
the same could be 4 in wlan code which will result
in wcov failure for HSP. Use a maximum of 5 WBM2SW
rings for HSP based on FW_SIM config flag to address
this failure.
Change-Id: I8340cd094eb1e0cf842894e5c89174d410729028
CRs-Fixed: 3071662
