Add new vendor command QCA_NL80211_VENDOR_SUBCMD_WIFI_FW_STATS
which is used for wifistats. Also remove
QCA_NL80211_VENDOR_SUBCMD_HTT_STATS which is wrongly used
in place of QCA_NL80211_VENDOR_SUBCMD_PEER_FLUSH_PENDING
Change-Id: Ia73a09419c22c1206f8f933b9cf4b7f22b0399fd
This will help to configure desired rate mask. It can be
used to optimize link performance.
Change-Id: I15b6fbc512d9b0869a6ad6a6f24f1593abf14dae
CRs-Fixed: 2758871
This change allow Tx VDEV of MBSS mode to configured
dynamically by reset the VDEVs.
This change includes FW service bit parsing, checking
VDEV state of all VDEVs, sending MBSS information in
VDEV start command
Change-Id: I46b13629bd1c07be86b408d72c2967642ce8542e
CRs-Fixed: 2759229
STATUS_BUFFER_DONE tlv written in first word for a status
buffer indicates that DMA is done for that status ring entry.
In existing implementation, for a status ring entry if
STATUS_BUFFER_DONE tlv is not written by HW, we poll on to status ring
entry until DMA is done by HW.
During lmac reset it may happnen that HW will not write STATUS_BUFFER_DONE
tlv in status buffer, in that case we end up polling infinitely leading
to backpressure on monitor status ring.
As per MAC team's suggestion, when HP + 1 entry is peeked and if DMA
is not done and if HP + 2 entry's DMA done is set,
replenish HP + 1 entry and start processing in next interrupt.
If HP + 2 entry's DMA done is not set,
poll onto HP + 1 entry DMA done to be set.
CRs-Fixed: 2740988
Change-Id: Ieef667f0bb4a47e74fc320c93243c637409f47f0
For QCN9000, full monitor is controlled through,
a. full_mon_mode ini param
b. QCA_SUPPORT_FULL_MON compile time macro
Currently enabling full monitor is not taken care under
macro QCA_SUPPORT_FULL_MON.
As monitor mode is not supported for 256M profile,
QCA_SUPPORT_FULL_MON is disabled.
Enable full monitor mode when both ini and macro are enabled.
Change-Id: Id5be5f7edc4739423fd74e28bb71a8f3339d87b3
CRs-Fixed: 2744622
To get the pmf beacon stats from firmware, host sets
WMI_REQUEST_PMF_BCN_PROTECT_STAT bit in stats_id param of
WMI_REQUEST_STATS_CMDID command. Firmware supporting pmf beacon
protection stats responds host with stats in wmi_update_stats_id
event.
Hence add support to get PMF beacon protect stats from firmware.
Change-Id: I99efd94ce5367da1312f60251ce7106997dd8bc8
CRs-Fixed: 2705084
Change feature flag name due to address alignment is
required from HW design perspective
Change-Id: I8418c7778f92031b11f0bb80bf9af307a61f45ff
CRs-Fixed: 2757537
The mac address is tried to be logged from a NULL
bss data pointer, which leads to unwanted behavior.
Remove the logging of mac address from the NULL
bss data pointer.
Change-Id: I83a9e8b1dac0bd4983bf074863987d39187f9db9
CRs-Fixed: 2761731
hif_pm_runtime_prevent_suspend_timeout is no longer supported
and hence delete this obsolete API.
Change-Id: I2c01105219adb198bbf27aee5f2d5c7e357c1e34
CRs-Fixed: 2761022
Release delete wakelock in delete response handler.
Release stop wakelock after sending the down command to
firmware so that it completes the disconnect sequence.
Change-Id: I0f47be04652178494d9cf0475af74ea573978005
CRs-Fixed: 2760116
Add support to handle the case where the peer transmits a frame
with HT/VHT/HE control field included.
Change-Id: I2b0d04ffa12a983a6c22e0a0bcbdfffa8fd48dcb
CRs-fixed: 2754234
Currently there is no api to parse a string to uint32 array.
Write an api to parse a string to uint32 array.
Change-Id: I54ab4ba1009f6efeb535df1ad43c56e1c3e56d2b
CRs-Fixed: 2758878
For SAP, the dwell time cannot exceed 32 ms as it can't go
offchannel more than 32 ms. For Go, since it advertise NOA
to annouce the absense period, it can have regular dwell
time which is 40 ms.
This was done increased scan latency was seen across
different targets.
Change-Id: I59a827380dbd76780eaebd8fff25a2eff2ef5107
CRs-Fixed: 2730638
Regulatory domain changes for regdomain.xls 32.
Add Low power indoor for AP and STA, for 6 ghz.
Modify FCC15 and FCC16 for the same.
Remove FCC17 6ghz definition.
Add world mode for 6 ghz.
Add country Curacao to APL10_WORLD.
Change Antigua/Barbuda to FCC3_WORLD.
Create ETSI16_WORLD reg-domain.
Change-Id: I1b1bdaceb4fa48973fb33fca17465a25d05ae040
CRs-Fixed: 2731336
Currently, the WMI definitions for BSS Color are not draft specific.
Update the BSS Color macros to be compatible with changes in
802.11ax Draft 3 and newer.
Change-Id: I20c842ff11ab449024c4fc1a0ef822c525ff40ec
CRs-Fixed: 2753170
Add changes to support new definition of
send_roam_scan_offload_mode_cmd() in connection manager.
Change-Id: Iea10907756ea785b0b0de72d01375f50ac3dbd6a
CRs-Fixed: 2758318
For older targets thermal mitigation is supported for the apps.
In moselle there is a new processor wpps on which firmware runs,
this commit adds the support for the thermal client wpps.
Change-Id: Ia212cd08c000ab11d4079cc701634dd919447ae9
CRs-Fixed: 2757932
Currently regulatory computes the current channel list for band
6GHz by default which is not correct as current channel list
size is based on the CONFIG_BAND_6GHZ, if this feature is not
enabled then current channel list array will be accessed out of
bound inside reg modify channel list for band api.
To address above issue, move computation of current channel list
functionality inside CONFIG_BAND_6GHZ feature flag.
Change-Id: I4612c9d3adb027976a4404fb7c92c0e415014b47
CRs-Fixed: 2760541
In cdp_soc_deinit peer hash table is freed to add
check to avoid NULL access from CDP APIs which may do
peer hash find
Change-Id: I47c4126c34bb64d43112a4f8e268da1a98f4124d
This change will add a build flag support to MSCS wherein
the functions will be called based on the status of the flag
created. This flag will be enabled by default.
Change-Id: I1c234c710d3b37f534ed2df7b37343cbd65ab930
CRs-Fixed: 2757257
For lithium based HST/HSP, CE4 is no longer used for data TX,
just few HTT msg for ring configuration, 2048 entries requires
16 * 2048 = 32K ring consistent memory which looks is not necessary,
reduce CE4 ring entries number to 256.
Change-Id: I117ec81cbee3642d640457c37a7ab900ddcae3f5
CRs-Fixed: 2757925
Sometimes frames are queued to dp_rx_thread wait queue
during WoW suspend in progress. At this time dp_rx_thread
is in SUSPEND state and these frames can't deliver to Linux
Stack, for ICMP case, if no other frames come to wake up
system, ICMP timeout will happen. Add a RX suspend check
in WoW to avoid suspend when frame comes before WMI_WOW_ENABLE
sends to FW
Change-Id: I756d3127f75da8f0e6e303c1250c01ce0c6ac573
CRs-Fixed: 2756263
In tx desc store vdev_id to avoid unprotected access of
vdev memory.
In tx path pass VDEV as argument to all APIs
In completion path get vdev from peer as vdev reference
in peer is protected with reference, in places where peer
is invalid get vdev object using vdev_id stored in tx desc
with a reference count
Change-Id: I364ebb51143218872c0bc6f856772ab1df00bb17
When get vdev by opmode from psoc, objmgr will return vdev without
getting reference if vdev list isn't null and no matched vdev with
opmode.
Change-Id: I1bb29f074155a40c38a21a9f0534d5f756862031
CRs-Fixed: 2758693
Add support for vendor attributes to update channel tx_time
and rx_time to the user space.
Change-Id: Ifdb50d8f7bcdcf8a560d174cd34efcb1991768a9
CRs-Fixed: 2757211
To get the channel state for 5g bonded channel using the freq
use wlan_reg_get_5g_bonded_channel_state_for_freq.
Change-Id: I0b42e9c547ba70259e88137a5a26c238cd66da8d
CRs-Fixed: 2756463
Add service bit support for channel tx and rx time in channel stats.
This service bit helps in not interpreting the default values for
tx_time and rx_time when new driver version is used with old firmware
where this tx_time and rx_time support is not present.
Change-Id: Icc7668f5842677ac6ef48176568301753e217ea7
CRs-Fixed: 2751500
Since few of the BSS scoring weightage is not applicable to AP platform
i.e WIN, use macro to set the default values for both WIN and MCC
platform.
Change-Id: Ic40deaab2621215c7bfc02c7cde082b81761f27b
CRs-Fixed: 2746158
When the option -Werror=tautological-compare is enabled, the compiler
reports error because bitwise comparison always evaluates to false.
Change-Id: I7532dc9bccb69e02be5f04897a6ecaff44e84a0d
CRs-Fixed: 2734883
To send received raw event buffer to event handler
Send without processed buffer to registered event with buffer
type WMI_RX_RAW_BUFF
Change-Id: I2a401e2e7afbfd8f32d4bd521d184ed9ddcdb264
Remove unnecessary assignment in wlan_serialization_destroy_cmd_pool
to avoid false alarm in some static code analysis tool.
Change-Id: I6f53b9c44534dc6297cf872dce0a265e1696d90c
CRs-Fixed: 2751743
