Currently, gRoamBeaconRssiWeight is not used in HOST or
FW.
Remove logic to pass value of INI gRoamBeaconRssiWeight
to FW.
Change-Id: Ifa1472ef413d20d0e54649bc24dd6c8d6aac4bc7
CRs-Fixed: 2770278
This records all the WMI events and commands, for all
PDEVs. Set WMI_EXT_DBG flag to enable this feature. Refer
Original Change-Id: I18e46f683e35912cad717ca3b9cc3d1885315362
Change-Id: I4c9bdfe6fdd195656ca0c01ca400eba595be24a3
CRs-Fixed: 2762266
Add sequence number to each packet queued on wmi pipe and
match it against expected sequence number in wmi completion handler.
WMI packets are consumed internally, use the skb mark field to capture
the sequence number of the wmi packet.
Change-Id: I1421e3fcff0a2b326f6d899780c773950544ef26
CRs-Fixed: 2741465
Make each WMI debug log buffer size configurable through
compile time config option. Now memory constraint platforms
can use these config options. Use default values if no
values are configured.
Change-Id: Ibc924e12a56ae7d529aea91e55bcc0bbce72ac7e
CRs-Fixed: 2741465
populated fils discovery, unsolicited probe response from
vdev extension stats and populated to APSTATS.
Change-Id: I762d7f36fa45f9048cf591bde3550a415e23bdcb
Support WHUNT FW simulation feature.
Records all the WMI events and commands, for all PDEVs.
Set WMI_EXT_DBG flag to enable this.
Change-Id: I18e46f683e35912cad717ca3b9cc3d1885315362
CRs-Fixed: 2762266
To get the pmf beacon stats from firmware, host sets
WMI_REQUEST_PMF_BCN_PROTECT_STAT bit in stats_id param of
WMI_REQUEST_STATS_CMDID command. Firmware supporting pmf beacon
protection stats responds host with stats in wmi_update_stats_id
event.
Hence add support to get PMF beacon protect stats from firmware.
Change-Id: I99efd94ce5367da1312f60251ce7106997dd8bc8
CRs-Fixed: 2705084
Add changes to support new definition of
send_roam_scan_offload_mode_cmd() in connection manager.
Change-Id: Iea10907756ea785b0b0de72d01375f50ac3dbd6a
CRs-Fixed: 2758318
To send received raw event buffer to event handler
Send without processed buffer to registered event with buffer
type WMI_RX_RAW_BUFF
Change-Id: I2a401e2e7afbfd8f32d4bd521d184ed9ddcdb264
Rename struct wmi_mawc_roam_params name to wlan_roam_mawc_params.
Rename struct wmi_bss_load_config name to wlan_roam_bss_load_config.
Rename file wlan_cm_roam_public_srtuct.h name to
wlan_cm_roam_public_struct.h.
Change-Id: I3e05d899810f8e899b5d6f48a3aa48c041cd17e3
CRs-Fixed: 2758137
Currently, stats over QMI features can only be disabled over build flags,
which is not flexible. Hence, add a CFG ini item to enable/disable stats
over QMI.
Change-Id: If5d57d2fc781fecc8817c2da8f61a2f7977d9c77
CRs-Fixed: 2752310
FW advertises scan radio capabilities as part of service ready
ext2 event. This is an optional TLV, presence of which indicates scan
radio support for the that pdev.
CRS-Fixed: 2746769
Change-Id: I5a0231c54375e9f00c85f0ad92839e2fa6c79f39
Add WMI support for WMI_TWT_SESSION_STATS_EVENTID. This event
contains stats for a given TWT session.
Change-Id: Ieca2b6845fd2ec32ccdfb1021611bed07379d365
CRs-Fixed: 2609951
Extract additional params obtained from fw as part of
WMI_TWT_ADD_DIALOG_COMPLETE_EVENTID during TWT setup
Change-Id: Ic58a1da463238a748cbf2678fe0156789ebb3559
CRs-Fixed: 2737036
The blacklist manager macro is connection manager specific, whereas
the macros used at WMI is dependent on roam offload.
Hence mark of dependency of FEATURE_BLACKLIST_MGR on
WLAN_FEATURE_ROAM_OFFLOAD.
Change-Id: If48b701a450d34915d57780a274311aa2590c89a
CRs-Fixed: 2746160
Macros like wmi_warn, wmi_alert, wmi_debug and others are not dependent
on WMI_INTERFACE_EVENT_LOGGING feaure. Move these outside to fix
compilation errors observed when this feature is disabled.
Change-Id: Ia585f4b947063828e2038d87b4736267d9aaad88
CRs-Fixed: 2742439
Based on new macro ROAM_OFFLOAD_V1, define
send_roam_scan_offload_rssi_thresh_cmd to different
function pointer type.
Change-Id: I965b8c0a2a2660b9560d48a92ad693a7efb7aaff
CRs-Fixed: 2730850
Extract btm response and initial roaming stats coming
from FW through WMI_ROAM_STATS_EVENTID event as
wmi_roam_btm_response_info_tlv_param and
wmi_roam_initial_info_tlv_param respectively.
Change-Id: I680260276530368aab0e783bf4ef83edb0fe0d62
CRs-Fixed: 2728465
For STA + STA roaming, instead of WMI_PDEV_SET_PCL_CMDID, the
WMI_VDEV_SET_PCL_CMDID needs to be sent.
Declare the corresponding send_vdev_set_pcl_cmd wmi tlv ops for
sending the WMI_VDEV_SET_PCL_CMDID command.
Also add changes to read the peer create confirmation and dual
sta roam feature support firmware capability.
Change-Id: I21456cb2e4c0b2bb66bf341539d2070677c49d16
CRs-Fixed: 2702849
Add support to populate 11AX wireless modes advetised in ext2 service
ready message. To support older FW that do not advertise this, use
existing host workaround to populate these in host itself.
Change-Id: I3b3b280672592c858bd3f6f0e368909a16bd30ee
CRs-Fixed: 2650136
In order to enable/disable the OBSSes whose transmission can be treated as
SR opportunity for SRG and Non-SRG based Spatial Reuse, add the required
WMI support. Also, add the Host abstractions for the following
- WMI_VDEV_PARAM_ENABLE_SRP
- WMI_SERVICE_SRG_SRP_SPATIAL_REUSE_SUPPORT
CRs-Fixed: 2684157
Change-Id: Ib3e919766436ca4d4e7f9242b642ba309dbf9a47
Add support for processing the start scan response
WMI event. FW provides the necessary information to
segregate FFT bins to pri80, 5 MHz and sec80 in
160/165 MHz. Also, cfreq2 and the channel width is
provided to FW via WMI command.
CRs-Fixed: 2672081
Change-Id: I666b6c18a63d5d01117aa9cbd611691c6f8b2793
To be able to configure SRG BSS Color Bitmap and SRG Partial BSSID Bitmaps,
add the required WMI support.
CRs-Fixed: 2665817
Change-Id: I141abe24dd34cab92f45b230b385500902d01416
Support synchronization of Tbtt in multi SoC case.
Add WMI to send vdev details of one soc to another.
Info includes beacon interval, bssid and tbtt calculated
in host wrt to other Soc.
Change-Id: I465140268b0fe5e0cb69f636ebeb08dc80667cf7
Currently there is no provision to configure OCL mode in FW during
driver bootup.
To enable this configuration add a new WMI API wmi_unified_send_ocl_cmd.
Change-Id: Idb936172612ff2ed8ea029d8a363b758625eb97d
CRs-Fixed: 2647631
Remove redundant data structure at wmi for vdev delete
response extraction, instead use mlme host data structure.
Change-Id: Iedb4280fb47d6567bc4d7b663ecd6af5e769ddfc
CRs-Fixed: 2641197
Remove redundant data structure at wmi for vdev delete all peer
response extraction, instead use mlme host data structure.
Change-Id: Ice91f55e0bf8a23ea1a639a74f6a8ac3b2779a7b
CRs-Fixed: 2641261
Remove redundant data structure at wmi for vdev start
response extraction, instead use mlme host data structure.
Change-Id: Ie0d3e6fa0acb1fea8bc0f50095491dbe803f6810
CRs-Fixed: 2641085
Add support for WMI event to host to process
dynamically selected Muedca values and update
the mgmt frames with the new set of values.
Extract the params and store in Muedca_param
struct from control path, to be used for
updating mgmt frames.
Change-Id: I6cc7756d1a246ff994edef195f6191d280bc5c47
Add support for the following NAN messages in kmsg:-
1. NAN enable status
2. NAN, NDP match events
3. NDP channel info.
etc.
Change-Id: I7f67b67153904b7efe8a708e3f93d069e399395c
CRs-Fixed: 2618433
WMI_WLAN_PROFILE commands support for tlv path.
Add WMI profile enable and trigger commands in tlv path
Change-Id: I10f867b181b559b82c097d6a61236f2145549238
Firmware advertises WMI_SERVICE_ROAM_SCAN_CHANNEL_LIST_TO_HOST_SUPPORT
at the time of initialization, that means host can querry for roam scan
channels list to firmware.
Host driver sends WMI_ROAM_GET_SCAN_CHANNEL_LIST_CMDID to firmware to
querry roam scan channels list and firmware responds with an event
WMI_ROAM_SCAN_CHANNEL_LIST_EVENTID.
Change-Id: I419a0206d7b06b6186d0c333c951bca5206f342f
CRs-Fixed: 2620607
1)Configurable number of bytes to log
2)Add support to record only specific WMI command/events
Separate buffers are added to save user specified WMI commands and events
1.To record specific wmi cmd, e.g. WMI_VDEV_START_REQUEST_CMDID
echo 0x5003 > /sys/kernel/debug/WMI_SOC0_PDEV0/filtered_wmi_cmds
2.To record specific wmi evt, e.g. WMI_MGMT_RX_EVENTID
echo 0x7001 > /sys/kernel/debug/WMI_SOC0_PDEV0/filtered_wmi_evts
Results of recorded specific WMI command/events:
1. WMI commands, e.g.:
cat /sys/kernel/debug/WMI_SOC0_PDEV0/wmi_filtered_command_log
2. WMI events, e.g.:
cat /sys/kernel/debug/WMI_SOC0_PDEV0/wmi_filtered_event_log
CRs-Fixed: 2597854
Change-Id: I1e90a13ac0717f1f37ba998fb1d06a990d3f4fa2
This patch adds the function to extract and parse the wmi events
WMI_VDEV_AUDIO_SYNC_START_STOP_EVENTID and
WMI_VDEV_AUDIO_SYNC_Q_MASTER_SLAVE_OFFSET_EVENTID. These events are
required for ftm time sync feature.
Change-Id: Ib17da82b7a8abfcff5d18125a0ba0e5249d6bf54
CRs-Fixed: 2615452
Add support to send DSCP-to-UP map table values to
FW over WMI cmd to update its corresponding map table.
Change-Id: I92c1464881282ead00714d0b115cffd34dc9ba1f
CRs-Fixed: 2617045
