Mark the blanking support as not supported and
return success status for AR9887
in target_is_scan_blanking_enabled().
Change-Id: I055f4d3b30781189744b0d96db4a93b61c0cf1f4
CRs-Fixed: 3430100
Re-init mlo global shmem region whenever in case of expected
target recovery mode. In case of mode1 recovery assert, need
complete teardown of mlo and clearing out global mlo shared
memory, when asserted SoC is recovered, re-init global shared
memory region again.
Change-Id: I475b08934bdceb78b87d115b79abf45e76633795
CRs-Fixed: 3390199
Read the new service capability:
WMI_SERVICE_TDLS_CONCURRENCY_SUPPORT for TDLS concurrencies
support. With this service capability below concurrencies are
supported:
STA+TDLS+P2P
STA+TDLS+P2P+P2P
STA+TDLS+P2P+SAP
Host driver will check this capability to disable TDLS
off channel when concurrent interface comes up. If this
service cap is not advertised by the firmware then
existing TDLS connection will be teared down when concurrent
interface is started.
Change-Id: I744775080a22ca8f3bc88894c349916eea27fd3a
CRs-Fixed: 3414266
Correct the documentation of the function
tgt_if_regulatory_unregister_rate2power_table_update_handler().
Change-Id: I04da3b3bd66f0665023a387d06cbe8c8242b152a
CRs-Fixed: 3430546
The kernel-doc script reported documentation issues in
target_if/core/inc/target_if.h, so fix them.
Change-Id: I3c539f3a581f5886c013e34fa54904899cbe9d17
CRs-Fixed: 3417467
Added change,
1. Define new DBR module DBR_MODULE_CBF to handle TxBF
standalone sounding CV data and corresponding ring
initialization.
2. API to extract new meta data TLV added for CV data.
3. API to handle standalone sounding complete.
Change-Id: Id28c5561bb8b3bf08de7ddd9aa2365e2ae99f1c2
CRs-Fixed: 3415627
The kernel-doc script identified documentation issues in the
target_if/cfr folder, so fix them.
Change-Id: I5af96dbc3b6adcd369134422dd2f9e5a6be799e9
CRs-Fixed: 3417466
Make changes to send the T2LM info present flag in the
WMI send function for T2LM WMI cmd.
Change-Id: I3642b2d89bb597f393f31d4b34e29adaf686fff4
CRs-Fixed: 3422686
The kernel-doc script identified documentation issues in the
target_if/spectral folder, so fix them.
Change-Id: I0bb7d3632fd602450713d8521861d246ea5f33df
CRs-Fixed: 3417470
The kernel-doc script identified multiple documentation issues in the
target_if folder. Some sub-folders which had a multitude of issues
were patched individually. Now fix the remaining issues.
Change-Id: Ia46f54eaec90762e61e590344760f3c3364088de
CRs-Fixed: 3417471
The kernel-doc script identified documentation issues in the
target_if/init_deinit folder, so fix them.
Change-Id: Ie2ddb73072629b0b1a110b8073443f312fa27a16
CRs-Fixed: 3417468
The kernel-doc script identified doucmentation issues in the
target_if/regulatory folder, so fix them.
Change-Id: I4c4cb774318153f672b9fddf651fa711e100f19a
CRs-Fixed: 3417469
Extract the blanking status from Spectral reports and upload
it to user space via SAMP message.
CRs-Fixed: 3413925
Change-Id: Ib033b88190be6bca3dff903cf279a9883821fb10
For legacy wlan chip, it uses wmi_service_thermal_mgmt to
announce its temperature capability.
Add wmi_service_thermal_mgmt checking to support legacy
wlan chip temperature as well.
Change-Id: I529e08780ba0c19a2953a36d821946958726ab7d
CRs-Fixed: 3413651
Add APIs to register and unregister the handler of rate2power table update
response event received from target. Add the handler API
tgt_rate_to_power_complete_handler to extract the response event
parameters from WMI.
Change-Id: I462abd8a333c74b943a04c62096da647ab667adc
CRs-Fixed: 3405417
Extract the scan blanking feature support from WMI service ready
event and store it in target if data structures. Add API to check
whether scan blanking feature is supported for a given pdev.
Change-Id: I65fefbb879b8433a68338bfcd3e4f729eff3ddd8
CRs-Fixed: 3413922
Host and FW have agreement about using fixed pdev id for CFR on HMT,
which required changes on both sides. In case only picked host
change with old FW, which will case device broken during booting up,
add this change to set pdev id base on FW capability for CFR request.
Change-Id: Iac82074228d42c6f51ea2024defdb0272e5cb396
CRs-Fixed: 3409616
MLO global shared memory arena accesses from the Host side will not go
through any implicit endian-ness conversions. Hence, convert the DWORDS
to the Host CPU order before using them.
Change-Id: If24edc7c6ef59fc82352d081b01a4baaaff65e02
CRs-Fixed: 3406980
PSOC null sanity check is done in caller, but again done in few
callee APIs.
Remove the duplicate sanity checks and unused TWT API.
Change-Id: Iac485bdce27be41c0d7152de1c86626edb534d11
CRs-Fixed: 3402622
Add changes to read R-TWT svc bit from FW and update capabilities on
host accordingly. Update add twt session command to include new
params required for R-TWT.
Change-Id: I91cea65ef737b6fa445cb3680dac15e0f1063446
CRs-Fixed: 3399205
There is a possibility of Spectral being stopped by user
while a report is being processed, this can lead to the data
structures becoming invalid leading to an error.
Guard API target_if_consume_spectral_report_gen3 with
spectral_lock to avoid this, and allow Spectral scan to stop
only when the ongoing report has been processed.
Change-Id: I617f66e3c5b45323f8c88e9e5e173b139a8a9241
CRs-Fixed: 3376179
Currently, firmware sends WMI_WLAN_FREQ_AVOID_EVENTID with set
of frequency ranges to be avoided when it finds LTE operating
around those frequencies. Host driver marks these frequencies
as unsafe and doesn't operate in SAP/P2P-GO mode.
There is a new requirement where SAP can be allowed to operate
in unsafe channels when below conditions are met,
1. Firmware advertises the capability fix_channel_priority in
WMI_COEX_FIX_CHANNEL_CAPABILITIES through ext2 event.
2. SAP is started in a fixed channel.
Fetch the capability fix_channel_priority sent by firmware and
cache it in wlan_psoc_host_service_ext2_param to support
this feature. Add APIs to cache value received from firmware in
psoc_info->info.service_ext2_param.sap_coex_fixed_chan_support
and to fetch the same.
Change-Id: I8ceb501240bc86d6b004446f9927f4402c487203
CRs-Fixed: 3381399
- Replace T2LM array in wlan_t2lm_context structure with established_t2lm
and upcoming_t2lm structures
- Mapping switch time is different for each AP vdevs. Hence, store the
value in vdev_mlme_proto_ap structure.
- Fix a few issues seen in mapping switch time expiry and expected duration
expiry.
Change-Id: Id69badc3f4bf5e5e741691348488369008ffc4e9
CRs-Fixed: 3369279
Special vap on AR9887 (ap_monitor) is used as both monitor and
AP mode. During channel change on DFS channels, vap is not up till DFS
CAC timer completes and hence cfg80211tool is not releasing the
rtnl_lock.
For Scan radio, CAC timer can be disabled on DFS channels.
Change-Id: I6142325892401e3a374760179ec7e4e206296f33
CRs-Fixed: 3341288
Add support for mlo groups in mlo soc/link setup and teardown
sequence participating in mlo.
Change-Id: I2b431b0ee1e5816b92ad183b52ad2998eb5bb46c
CRs-Fixed: 3343170
Initialize Spectral Scan detector ID to Spectral mode table for
QCA5332. Detector ID 1 and 2 are not supported for QCA5332.
CRs-Fixed: 3366784
Change-Id: I7fe9b53819c649455a67957827e4f900e39257e0
Mark srng_initialized to true when the DBR ring memory
allocation is completed.
Change-Id: Iacb4d5ac884bb575ad4b98201280527521906e63
CRs-Fixed: 3355169
Add ucfg and wmi changes to support for green ap low latency
power mode enable/disable command.
Change-Id: Ib9112e384c8354f1eff0f15610301225d51ef3ac
CRs-Fixed: 3265649
1. Change the names of parameters and functions related
to direct switch feature from ppe to ppeds
2. Remove the unused ppe_release_ring
Change-Id: I5a95b1273e338f354903af98158578ac65758a8a
CRs-Fixed: 3345097
Host and FW have agreement about using fixed pdev id for CFR on HMT.
Since it's different to legacy chip for concurrency case or get pdev
id base band.
Change-Id: I2b16876244cf8988e8855752844917fbf0154f54
CRs-Fixed: 3312489
To assist the Host in ML reconfiguration element construction for probe
responses, FW sends MLO link removal information as part of the MGMT Rx
event containing the corresponding probe request. This information is an
array of TLVs, one TLV for each link that is undergoing link removal from
the MLD for which this probe request is intended. The TLV carries the link
removal TBTT countdown value maintained by the FW for that link.
Add support to extract the same.
CRs-Fixed: 3335361
Change-Id: I16c6791a443ddb166da596d404a52ff2a38da291
WMI_MLO_LINK_REMOVAL_EVENTID will be sent by FW to update the Host on the
progress of the link removal operation. Add support to process this event.
Change-Id: I0c4d5b047cf062b421380f85717fac5a9bdea9c2
CRs-Fixed: 3334950
WMI_MLO_LINK_REMOVAL_CMDID is to be sent by the Host to initiate the
removal procedure for a given link from its MLD. This command will be sent
on the impacted link only. Add support to populate and send this command.
Change-Id: I8485d8c8897bb2bb891d50546d5fbfac2a69a4ce
CRs-Fixed: 3314430
Add API to parse the TID-to-link mapping event ID for the AP vaps.
As part of this event,
- Update the mapping switch time TSF value in host data structures.
- When mapping switch time or expected duration expires in the FW,
update the host data structure.
Change-Id: I93232429fe5c2aa12dc4bf9f6a2f014761b7df15
CRs-Fixed: 3350697
