Changes to allocate correct number of buffers for monitor during boot
time and allocate remaining buffers only when monitor vap is created.
Change-Id: I8a2cd7b6a20a281934c47ca0418904b426d17a4d
CRs-Fixed: 3432525
Move smart monitor cdp func ptrs to cdp mon ops structure.
Smart monitor cdp functions are different for 1.0 and 2.0
hence moving the func ptrs to mon ops structure ensures that
func ptrs are initialized appropriately.
Change-Id: Ic827b44f36d76349f397e5b72dec0a127f90aa7a
CRs-Fixed: 3428778
1) Enable MLO Link Stats Support
2) Add Stats counter to capture Invalid Link ID
3) Fix the FW Recovery crash while ol_stats
disable.
Change-Id: I1b5263ae024579c5ec2018f8082f0d03ffdf0030
CRs-Fixed: 3431319
With the current implementation of tlv parsing for rx_evm and
rx_antenna, there is a flood in printing the higher pilot
evm count error. Update the debug level of the print to
prevent the RCU stall due to excessive printing.
CRs-Fixed: 3435849
Change-Id: I8f1eb0c133a4d8b70494639d90b04de23b276fc2
Initial changes for York scan radio bringup in monitor mode.
Update monitor filter settings.
Change-Id: Ib9468f11b71d0439d0bd63526f64f454ed6b5b4d
CRs-Fixed: 3421412
1. Add an API to process trigger_umac_recovery T2H message.
2. Synchronize do_pre_reset, do_post_reset_start, do_post_reset_complete
messages for all the SOCs and then process these messages in the host.
3. Synchronize pre_reset_done, post_reset_start_done,
post_reset_complete_done for all the SOCs before sending it to FW.
4. Add a new state in host for trigger_umac_recovery message.
Ignore back to back trigger_umac_recovery messages received from FW.
Change-Id: Id45d326d63e122834090844e83ad6cc7240f96af
CRs-Fixed: 3425833
This reverts commit I2a697f91e572f88a36f96085d15c90c679deaf0c.
Original change was added to support manual ulofdma trigger but it
needs to be reverted here due to a small tweak in design approach.
New design to be integrated and hence reverting this one.
Change-Id: I4c358db48298666c753aa89166a31adbba067e36
CRs-Fixed: 3429084
For beryllium target in monitor mode host only subscribe
to MSDU end and MPDU start tlvs, but during monitor mode
up as part of monitor filter reset host is subscribing to
all the tlvs.
To fix the issue only subscribe to MSDU end and MPDU start tlvs
on target basis
Change-Id: I1599559b1af0b5121a7c361db403da857988cc01
CRs-Fixed: 3429044
In tx monitor, the maximum capacity to store status buffer is 64.
During high throughput scenario number of status buffer exceeds 64.
Change-Id: I5e8d1945773d2027a4adbc141fa868587e80acd1
CRs-Fixed: 3430126
Fix for the crash seen during FW recovery
while doing disable ol_stats for all the
MLO pdev's
Change-Id: Ie7b037e2d124009658a01d2a00d0a74a784ac51f
CRs-Fixed: 3430134
Currently for the monitor status ring history,
the event type is not being logged.
Fix the event type logging in the monitor status
ring history.
Change-Id: I43f07bf9a4232a203b7a996db6038a081249ffc9
CRs-Fixed: 3425325
Add support to enable/disable MLO Link Peer stats through
ini and cfg80211tool enable_ol stats command
Change-Id: Id1229a149befa416d060e1b07eee150e6b295abf
CRs-Fixed: 3397721
Extract manual ulofdma trigger bit as part of rx ppdu stats per user
update process
Change-Id: I2a697f91e572f88a36f96085d15c90c679deaf0c
CRs-Fixed: 3418677
Add 160 MHz and 320 MHz BW support for Smart Antenna.
Peer connect gets rate codes for all supported BW on connecting peer
as part of wmi_peer_ratecode_list_event. This changes add 320 MHz and
160 MHz BW support.
Change-Id: I715dd5a64c38114fef6e17c2e2f6a526e1a716c2
CRs-Fixed: 3381648
Adding MLO timestamp offset reported from firmware to tsf time for
radiotap header populated in tx monitor.
Change-Id: I44f2c1a49d4d2b73ac9117319b72ba8635cb5b38
CRs-Fixed: 3398345
Add TLV recording support for Rx monitor. The TLV
tag and its data are recorded in a fixed size buffer
Change-Id: Idad896d1ece25a499ab76028c8a231fcd9947f66
CRs-Fixed: 3402543
Adding check for num users and num ul users to not cross max users limit
And convert target uplink trigger tid to data tids
CRs-Fixed: 3396991
Change-Id: I66180dba0889e116ce8ff4e582fd9c1d8391f27b
Previously all of the documentation issues in the dp/wifi3.0/monitor
folder were fixed by:
Change-Id I27e14544ef88193bbfe6ee409fe58c59d6b5bea2
qcacmn: Fix dp/wifi3.0/monitor documentation
But concurrently a separate patch introduced a new issue in the
dp_rx_mon_pkt_tlv_offset_subscribe() documentation:
Change-Id I9e5d6cbb32cc7469dc367f6fc4bca4ce8adc9da8
qcacmn: Word mask TLV support for monitor
So fix that issue.
Change-Id: I174b19d9dded26d14af6eb94115a1c461a2f9e6f
CRs-Fixed: 3401990
The pointer to next TLV in status buffer is considered
as valid, only if atleast the TLV header size is available
within the status buffer.
Change-Id: Ic222bfab4790853ee012de4b0a860ab037972ff5
CRs-Fixed: 3378058
Add cdp layer API to get stats and
Copy peer deterministic stats from dp_mon_peer to cdp structure
CRs-Fixed: 3380939
Change-Id: Ic90b9c9f5c7463ad0d5b7c2bb7a371e4d4fef070
Parse sequence type and msduq htt tlv and
update mode count and avg rate based on txmode.
CRs-Fixed: 3380939
Change-Id: I5fe2068cbe8b312738eeaa4c4a48000e1a66255c
RX monitor meta header now supports two TLVs.
Macro used to represent maximum RX monitor meta
header TLVs should reflect the same.
Change-Id: I29cf830323cbe91a186c4876606290dc3c87b4eb
CRs-Fixed: 3385695
The kernel-doc script identified a large number of documentation
issues in dp/wifi3.0/monitor, so fix those issues. In addition,
there are a number of instances where public functions have their
implementation documented instead of having their interface
documented, so move that documentation.
Change-Id: I27e14544ef88193bbfe6ee409fe58c59d6b5bea2
CRs-Fixed: 3373167
Currently for jumbo RX monitor MPDU, it will spread across multiple
RX buffers(N). host set length 112 bytes for (N-1) skbs(not include
the last skb), while the expected length should be (2048 - 400
- 112) = 1536 bytes for them, this lead to last skb length
calculation incorrectly, which will be total MPDU length -
112 * (N - 1), this will be over boundary of skb buffer room
easily.
Set length 1536 bytes for (N-1) skbs to fix it.
Change-Id: I4e73673887d5d8197cf64bed5da34a3751df1e33
CRs-Fixed: 3381528
Check peer count to decide if peer filtering is required or not.
This is required to support peer filtering for full monitor mode.
Change-Id: Icb3c0fc834795dbbbfd3a7899b3b733409f5f70d
CRs-Fixed: 3372600
