Check if clk is enabled before disabling it to avoid
warning log during adsp SSR.
Change-Id: I916af6f9efacfe3d08e0b05dcc0c6023944369d2
Signed-off-by: sarath varma ganapathiraju <quic_ganavarm@quicinc.com>
As of now swr slave path disable only
when no usecase running, that is incorrect.
When stop the usecase itself disable the swr slave path and
set the clk for inactive bank.
Change-Id: I35bc693dc65028ba8ad04f59d47a1101c7bb470c
Signed-off-by: Yuhui Zhao <quic_yuhuzhao@quicinc.com>
Curr_micbias2 val should be same with mb->micba2_mv.
for some customers, their micbias is not 1800mv,
so we should set the curr_micbias as mb->micb2_mv which
was the actual micbias val the customer use.
remove the dev_up check from micbias, since with this check,
Headset may be detected as a incorrect type.
Change-Id: Ia5a1fd434a09617a57096531c69956479c69f079
Signed-off-by: Yuhui Zhao <quic_yuhuzhao@quicinc.com>
cls-h port enablement is not required for aux path, So removed
the cls-h route.
Change-Id: If0d498ff042b59df920fe51ca99715da543876b8
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
(cherry picked from commit cf87e20cb2)
if there is any tx usecase running, reset tx swr
clk will make all the tx sequencer power off,
so check sys_usage_status first before reset
tx_swr clk
dont need set swr clk for inactive bank.
Change-Id: I21362885c84e6ce4afbbfd18a48191f53f8ccc6b
Signed-off-by: Yuhui Zhao <quic_yuhuzhao@quicinc.com>
Enable Low Power Mode for the power supplies while
going to suspend mode on wsa883x and wcd9378.
Change-Id: I133c1b791bcd8b53cf79650d7347d5889da29491
Signed-off-by: Sarath Varma Ganapathiraju <quic_ganavarm@quicinc.com>
fix to avoid null pointer dereference by checking
for the structure to be non-null, in below functions
wcd9378_mbhc_post_ssr_init of wcd9378-mbhc and
interpolate_zdet_val, usbcss_sysfs_store of wcd939x-mbhc.
Change-Id: I37979f969786c5490e1964913ad61123a4e09006
Signed-off-by: Srinivas Marka <quic_smarka@quicinc.com>
when we enable compander for headphones, the quality
of hph playback is bad, since we have not disconnect
the right port, correct it.
Change-Id: I63ab0734870027109a7f032c47f8865083374a5b
Signed-off-by: Yuhui Zhao <quic_yuhuzhao@quicinc.com>
when amic4 recording start, sys_usage_bit get failed,
since the mask of read val is incorrect.
Change-Id: I4c6bdaf6cafdd133e272bcacfd2faea5f176f9ab
Signed-off-by: Yuhui Zhao <quic_yuhuzhao@quicinc.com>
Optimize the init sequence for tambora, enable TXSCBIAS_CLK
and set IBIAS_LDO_DRIVER as 5ua.
Change-Id: I639b7051d03d167972f592b155072260d4e02aec
Signed-off-by: Yuhui Zhao <quic_yuhuzhao@quicinc.com>
Update the hph/ear/aux playback sequence, disable the reg
which should be disable.
Change-Id: Ib1353e686a49222f5084722cced7687815f76ab2
Signed-off-by: Yuhui Zhao <quic_yuhuzhao@quicinc.com>
Tear down the correct REQ_PS when widget power down,
that can fix the amic3 mute after ssr issue.
Change-Id: I7b5c958e79eb23184bd11375bae11dbcd51e961a
Signed-off-by: Yuhui Zhao <quic_yuhuzhao@quicinc.com>
Update the micbias enable logic for tambora,
and add some widgets to switch between amic and
va amic.
Change-Id: I2c9a7658d79a7c9d255884df7b81aa8062185d72
Signed-off-by: Yuhui Zhao <quic_yuhuzhao@quicinc.com>
Remove test reg configuration from init_reg func to
avoid pop noise in hph playback with comp enable.
Change-Id: I7c49d224e92c28cfdd2e971095ac5e6fa6db14c9
Signed-off-by: Yuhui Zhao <quic_yuhuzhao@quicinc.com>
enable swr comp port. but not set any DRE
related registers unless comp switch is
set from the mixers.
Change-Id: I57b45bb504f0851aed90521e20a94fcb359b29ff
Signed-off-by: Sarath Varma Ganapathiraju <quic_ganavarm@quicinc.com>
added 1msec delay before resetting FS cntrl, to ensure no
glitch at the start of VI feedback.
Change-Id: Ia9ae296f336e4deb4b8bedb718316a6772466a95
Signed-off-by: sarath varma ganapathiraju <quic_ganavarm@quicinc.com>
mark OTP_0 register as read register instead of read and write.
Change-Id: I666c388ba10cd00daf8ac902e0b05177503b1e26
Signed-off-by: Vangala, Amarnath <quic_avangala@quicinc.com>
System gain is miscalculated due to incorrect parsing of
device tree property. Correct the parsing logic of the
system gain device tree property.
Change-Id: I8c9c5198a139a69c2d5d9520a071123261b0581f
Signed-off-by: Phani Kumar Uppalapati <quic_phaniu@quicinc.com>
To enable datapath control for both HPH_L and HPH_R in
HPH sequencer. Which is used to fix the single channel
mute issues.
Change-Id: I1d9fb22255a2895fc2543ef5c3de02f0bdb9999d
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
