Issue: log level for some frequent prints is set to info
those logs would be present in dmesg as well as driver logs
and System performance may get affected due to excessive
logging.
Fix: Avoid redundant logs which may affect system
performance and change default log level to debug.
Change-Id: I053e95806884eab26c37340823b818c9e3c81036
CRs-Fixed: 2771412
The function dfs_mlme_mark_dfs_for_freq was introduced as a counterpart of
dfs_mlme_mark_dfs but both implement same functionality. In order to remove
redundancy, remove dfs_mlme_mark_dfs_for_freq. Replace the references to
dfs_mlme_mark_dfs_for_freq with dfs_mlme_mark_dfs.
CRs-Fixed: 2738831
Change-Id: I567861e4491802d73549670dfd30113b1a773d07
During DFS random channel selection, in the function
utils_dfs_get_channel_list, check if inter-band channel switch is
allowed before adding the inter-band channels in the channel list,
from which a random channel is selected as the target channel.
Change-Id: I3f6c88788819039c4b562b462a922edf1baafe12
CRs-Fixed: 2771640
Do not create a DFS object for a radio if the channel frequency range
advertised by the target is a 6G only range.
Change-Id: Ib672902ec3945d00b53ab6d4460584ca889ae387
CRs-Fixed: 2755652
In Dependent Repeater, if the Repeater STA is connected to a Root-AP
in a DFS channel, then the Repeater AP which is configured in ETSI
domain comes up in the DFS channel doing CAC.
In FCC domain, whenever Spoof radar pulse comes, we check if the Spoof
check is done and skip the CAC accordingly. In case of other domains,
Spoof events are not present. Therefore, Spoof test can be always
considered complete for non-FCC domains. Also the test can always be
considered complete if the target/FW does not support spoof test.
CRs-Fixed: 2756845
Change-Id: Icac4dee5f3f69a2578a0a34d7aea9456aab63ece
With the current implementation dfs->dfs_soc_object was initialized in
function dfs_agile_soc_obj_init under the macro QCA_SUPPORT_AGILE_DFS
and ATH_SUPPORT_ZERO_CAC_DFS both of which are disabled for the low
memory profiles. Hence the dfs->dfs_soc_obj was not initialized for these
profiles, this led to a crash when the following access was made in
dfs_is_true_160mhz_supported and dfs_is_restricted_80p80mhz_supported.
psoc = dfs->dfs_soc_obj->psoc
Fix this by unconditionally initializing the dfs->dfs_soc_obj in
wlan_dfs_pdev_obj_create_notification.
Change-Id: I3438464e8efedaf2d62a68bbcf1bda5ee0579deb
Add 6G support for DFS Random channel selection to move to a 6G target
channel in the event of a radar on a radio that supports both 5G and
6G channels.
Change-Id: I1ad65b36feba65b6bbc3affc243aae1beb12960c
CRs-Fixed: 2727958
In Partial-Offload, when a repeater is associated with Root-AP in
DFS channel. The Repeater STA will get connected with Root-AP and then
Repeater-AP comes up in the DFS channel but it does not send beacons.
The reason is, when a STA vap is UP and in connected state, CAC is
skipped. So, for Repeater-AP we send VDEV_UP before Spoof radar
pulses event. FW rejects the VDEV_UP sent by host and therefore
Repeater-AP will be in UP state but it does not send any beacons.
The fix is, while checking the condition if STA vap is set to true, we
also check whether spoof radar event is completed. If the spoof radar
event is not completed, then we will not skip CAC and then VDEV UP
will be sent after the Spoof radar event.
CRs-Fixed: 2748740
Change-Id: If63f3118d3e40785b375a0bd59d46783c14fe433
Introduce APIs to perform postNOL channel switch to user
configured channel after the NOL expiry of said channel.
This channel change will involve regular CAC after vdev start.
Change-Id: I426b0c4b51c84789870841dd4c3af942be185f20
Following are a part of this change:-
1. Add an API to check if PreCAC/RCAC is enabled. This API is used before
delivering an external event to Agile SM.
2. Post an event to the Agile PreCAC SM if Radar is found on
agile channel. Radar on primary channel is taken care of by the
ensuing channel change.
3. Move all Agile PreCAC changes under macro QCA_SUPPORT_AGILE_DFS,
only RCAC specific changes remain under QCA_SUPPORT_ADFS_RCAC.
Change-Id: I45d4b9f826d36e9e4093879b394165a15a52f324
Both (ETSI) PreCAC and RCAC are going to use use the same state
machine. The state machine drives the Agile engine and not very specific
to RCAC or PreCAC, therefore let the state machine be called agile state
machine and change the names of all the associated variables accordingly.
In this preparatory change, modify names of all APIs, states and events
to make them common to Agile RCAC and Agile PreCAC
Change-Id: I67858839589145bf4377a7eafec7c21ca4823141
CRs-Fixed: 2711104
The radar found parameters processing API dfs_process_radar_ind() is
supposed to read-only the radar_found_info parameters and not modify
them. A block of code for PO platforms modify the radar_found_info
parameters.
The function dfs_process_radar_ind() should not modify the radar found
input parameters.
Since in this case the parameter modifications are specific to partial
offload, move the code that modifies the parameters out of the function
into a partial offload specific code.
NOTE:- The previous change I2c717219d0b0f9263734767bee6070f335032b04 also
does the same that is mentioned here but for modification of
full-offload parameters.
Change-Id: Ic438d70eaadb9ef91d28f6a0c22caf4926ed1df1
CRs-Fixed: 2737060
The routine 'dfs_translate_radar_params()' translates the radar found
offsets given by a 160MHz detector which ranges from -80MHz to +80MHz
to that of the offsets given by an 80MHz detector that ranges from
-40MHz to +40Mhz. The same function also translates the segment ID from a
single-detector(160MHz) model to a two-detector model(80Mhz). This routine
is unnecessarily called for partial-offload chipsets which do not support
True 160MHz.
Do not call the function 'dfs_translate_radar_params()' from
'dfs_process_radar_ind()' which is common for both partial-offload and
full-offload. Call it from the full-offload specific radar action
function 'tgt_dfs_process_radar_ind()'.
Change-Id: I2c717219d0b0f9263734767bee6070f335032b04
CRs-Fixed: 2718507
CONFIG_CHAN_NUM_API macro will be disabled. Remove all the references to
any function defined/declared under the macro. The function
reg_get_channel_list_with_power was placed under CHAN_NUM_API by mistake.
This API does not have any CHAN_FREQ_API counterpart. Therefore, move
this function out of CHAN_NUM_API macro.
The function dfs_send_radar_ind_for_freq is redundant as its counterpart
dfs_send_radar_ind has the same arguments and same functionality,
removing the function dfs_send_radar_ind_for_freq. The function
dfs_send_radar_ind is moved out of CHAN_NUM_API macro.
The function wlan_reg_chan_to_freq, wlan_reg_legacy_chan_to_freq is
moved out of CONFIG_CHAN_NUM_API macro. Since it is applicable for legacy
bands.
CRs-Fixed: 2711600
Change-Id: Ib29be638c17ce51f928c865e362ac5b2b8954b42
While selecting the next channel after radar, if RCAC is enabled,
RCAC frequency and ch params are chosen. But in case where no
RCAC frequency was found, ch params were filled with 0s which are
then used by the next channel selection logic (random channel)
to figure out the next channel.
Since the ch params were now 0s, the ch width is pointing to
20MHz (0 enum) which results in a 20MHz channel picked irrespective
of current mode.
Do not modify ch params if the RCAC frequency is NULL.
CRs-Fixed: 2729023
Change-Id: If542fb8584a767ad8d1fe6115af039e8bc2cb173
Add new scan type SCAN_FOR_CONNECT to support connection manager
infrastructure.
CRs-Fixed: 2713772
Change-Id: I631f3f0324e82ef6cd8b2befbed020649c80bc4c
The function "ucfg_dfs_is_hw_pulses_allowed" should return bool and has
a compilation error
"return' with no value, in function returning non-void".
Return the bool type "false" when the dfs is a NULL object.
CRs-Fixed: 2715235
Change-Id: I8717aaedd1ac8208ce6257721d5890b82ca13a8f
The OCAC completion event 'wmi_vdev_adfs_ocac_complete_event_fixed_param'
has been updated to include center frequencies of 2 segments in MHz for
165Mhz Agile mode.
Update the corresponding Host OCAC completion data structure
'vdev_adfs_complete_status' to include 2 center frequencies to support
165MHz Agile mode.
Also FW might send a delayed OCAC completion status after the Host has
configured a new agile channel. So all the OCAC completion events should be
validated if the status is received for the current agile channel.
Update the OCAC completion processing API to include 2 center frequencies
and chwidth so that, it is possible to check if the OCAC completion status
is received on current agile channel or an obsolete agile channel.
CRs-Fixed: 2705671
Change-Id: Iab8980f8d030120d107f068d890c9694d28ee98c
Add a dispatcher API ucfg_dfs_is_agile_rcac_enabled() to determine
if RCAC is supported for the given pdev.
Change the prototype of dfs_get_rcac_enable() to store rcac
config in a bool datatype.
Also, do a structure copy of ch_params of RCAC channel in
utils_dfs_get_rcac_channel().
CRs-Fixed: 2679975
Change-Id: I4b033463fc8111144bfffd3bb7e7d2bef6568c46
Trigger Rolling CAC SM events from
- NOL expiry (EV_RCAC_START) to trigger RCAC START with a
new channel if possible and not already running.
- Agile radar (EV_ADFS_RADAR_FOUND) to restart RCAC with a
new random channel.
- vdev restart (EV_RCAC_STOP) to stop the running RCAC when
the primary channel changes. Start will be based on the
availability of the new channel.
In case of the rolling CAC feature, a channel is programmed to
the agile detector on which CAC is running continuously.
Introduce an API that finds an RCAC completed channel and return
the channel params which will be used for the next channel
change.
Also add a boolean argument in dfs_set_current_channel api to
indicate if the dfs current channel is updated in the API
"dfs_set_current_channel".
CRs-Fixed: 2674621
Change-Id: Ica54a57f131cd54e47138f1cbeef2dd0023390ed
Dfs radar processing function dfs_process_radar_ind is called
in interrupt context. Add new API policy_mgr_get_can_skip_radar_event
to be called in interrupt context to get radar skip flag.
The policy_mgr_get_dfs_master_dynamic_enabled will acquire mutex and can't
be called in interrupt context.
Change-Id: Iffa4f56da56b991d817c36891c6f6a611f3a094e
CRs-Fixed: 2673808
An extension of preCAC feature is Rolling CAC. The distinct difference
between these features is that the FW runs the off channel CAC
timer for a "finite" time for preCAC and runs the timer for "infinite"
time on an off channel. Hence the infrastructure built for
preCAC feature is being modified to accommodate RCAC feature as well.
Following are the modifications done:
1. Add an enum to represent various off-channel CAC modes.
2. Remove the 'static' declaration of few APIS so as to re-use them.
3. Add 'dfs_rcac_ch_params' to DFS PDEV object to store the RCAC
channel params so as to use the channel params after radar detect.
4. Rename DFS APIs to match its functionality.
CRs-Fixed: 2670419
Change-Id: I0bf0d33955706941cffb4e9cf6fcebfb465a6c74
'jiffies' does not include the device sleep time.
Use qdf_get_monotonic_boottime to monitor lapse of time for nol.
Change-Id: I6e00e003b8ee3d456ac4ec62b23fdaa02d577672
CRs-Fixed: 2652692
As part of the Rolling CAC State Machine, introduce three state
enums (INIT, RUNNING and COMPLETE) and the corresponding state
events.
Introduce generic APIs such as dfs_rcac_sm_create,
dfs_rcac_sm_destroy and dfs_rcac_sm_deliver_evt for rolling
CAC State machine operations.
CRs-Fixed: 2659666
Change-Id: I528db71aa7d21dced7e47ff4f9cccfbfe94c8c21
Feature Description:
FCC/JP domains do not support PreCAC. However, we can always start
beaconning in a channel if we have completed CAC in that channel for more
than or equal to the CAC period of that channel.
If an Agile engine is available and the next channel is known, we can
start CAC in the next channel using agile, while continuing the Tx/Rx
in the current channel. And when we want to start beaconning in the
next channel after a radar detection (or after/for a user request) we can
do so without any new CAC. This allows us to jump to the new channel
without having to disrupt any ongoing data traffic. This type of
continuous CAC in the next channel while operating in the current channel
is known as Rolling CAC.
Following changes are implemented:
I)Per DFS PDEV:
1) 'dfs_agile_rcac_freq' to store agile RCAC frequency.
2) 'dfs_agile_rcac_ucfg' to enable/disable RCAC feature.
II)Per DFS PSOC:
1) 'dfs_rcac_timer' is the only RCAC timer for the device/Psoc. This will
be shared by pdev level dfs objects.
2) 'dfs_rcac_timer_running' to indicate if RCAC is running or not.
III) New APIs:
1. A dispatcher API 'ucfg_dfs_set_rcac_enable' to set rcac config.
2. A dispatcher API 'ucfg_dfs_get_rcac_enable' to get rcac_config.
3. A dispatcher API 'ucfg_dfs_set_rcac_freq' to set user configured
rcac freq.
4. A dispatcher API 'ucfg_dfs_get_rcac_freq' to get the user configured
rcac freq.
5. Rolling CAC timer init/deinit APIs.
CRs-Fixed: 2659666
Change-Id: Iae002b2ab77964fca4faf237b0d0a4e2f2afe4c2
Instead of channel number, use channel frequency for restricted 80+80MHz
boundary check.
Change-Id: I2fa65c3b1d102acd6b64b4c6e1583d2bc29484d1
CRs-Fixed: 2645155
Currently QDF_MAX_NUM_CHAN and NUM_CHANNELS aren't aligned, this unalignment
may cause many potential OOB access. So replace QDF_MAX_NUM_CHAN with
NUM_CHANNELS to keep unified.
Change-Id: I7bf7829d776f7caf5b2afbd2c9fd0c20d608e630
CRs-Fixed: 2644073
The FW has updated the wmi command wmi_vdev_adfs_ch_cfg_cmd_fixed_param to
configure the Agile channel to enable the 165MHz channel as an Agile
channel by enabling 2 center frequencies.
For a 160MHz and 80MHz channel, the parameter center_freq1 will be the
center of the respective channels. For the 165MHz channel(restricted 80p80)
the parameter center_freq1 will be the center of the left 80MHz channel
(5690MHz) and the parameter center_freq2 will be the center of the right
80MHz channel (5775MHz)..
Update the ADFS parameters across UMAC, TARGET_IF and WMI layes to
update the Agile channel configuration command.
Change-Id: Ie480af9a6bb8dad87dd783ab06e17b449605b1c9
CRs-Fixed: 2642555
Provide support for bangradar with detector ID as one of the parameters.
Add the parameter as part of the packed arguments to be sent to FW.
Also add APIs for basic sanity check of bangradar params and packing
bangradar params inside an 32 bit unsigned integer.
CRs-Fixed: 2646549
Change-Id: Ie781bc9421b7ac0d407eb01814c9242c7f988884
Current NOL conversion for dynamic mode switch is in such a way
that the NOL data is copied to the pdev ID entry for the targeted
mode. That is, the NOL data is split/merged before mode switch and
copied to a temporary structure before mode switch command is
sent to FW.
At this point, the target pdev's frequency range are still the old
values because of which, certain entries of the NOL data are missed.
Also in case of FW failures, the NOL entry cannot be added back
because they have been merged/split already.
To avoid the above, rearchitecture deinit and reinit NOL for
mode switch in such a way that the NOL data, as-it-is, is copied
before mode switch and is only split/merged after the frequency range
of the pdevs are properly mapped and the FW response is a success.
Change-Id: I4a073d1327ba182c40ced6089aa46d8f5f241d33
CRs-Fixed: 2632582
Per requirement, if STA+SAP is working on same 5G DFS
channel and INI g_sta_sap_scc_on_dfs_chan = 2, the
SAP DFS master is temporarily disabled to skip radar event,
and it will follow STA's channel movement. So, skip the
radar event processing based on STA+SAP concurrency policy,
otherwise the SAP would be stopped by kernel because the
current home channel is marked "disabled" by regulatory
during processing of radar event.
Change-Id: I3f851fe694c0e127665732894306e20f5d1c93f4
CRs-Fixed: 2636200
In MCL code, QCA_DFS_NOL_OFFLOAD is no defined,
which causes the utils_is_dfs_cfreq2_ch always return
"false".
In function vdev_mgr_start_param_update
the "dfs_set_cfreq2" needs to be set correct dfs flag from
utils_is_dfs_cfreq2_ch so that vdev start wmi command will include
correct DFS flag - WMI_CHAN_FLAG_DFS_CFREQ2 for AP home channel.
Move utils_is_dfs_cfreq2_ch function out of WLAN_DFS_FULL_OFFLOAD
and QCA_DFS_NOL_OFFLOAD build flag.
Change-Id: I341db02c4db3ad3b21d8b2c115b2baffc3df3164
CRs-Fixed: 2619273
Supported dynamic HW mode switches:
DBS (full band 5G and 2G) <-> DBS_SBS (low band 5G, high band 5G and 2G)
Description of the changes:
1. NOL conversion:
a. Introduce a temporary NOL list copy structure in DFS psoc obj.
b. When mode switch is triggered:
i. Stop the NOL timers and clear the data, to avoid processing NOL
expiry during mode switch.
ii. Allocate the psoc NOL copy for the target num_radios.
iii. Store the NOL data of each radio to the target pdev ID
(pdev ID after mode switch) in the psoc NOL copy,
using a unified mux/demux API.
c. After mode switch is completed:
i. Resume NOL by re-initializing the list from the temporary psoc
copy.
ii. Free the psoc copy after mode switch is complete.
iii. Note: changes are made to support pause and resume of NOL,
increasing NOL timeout by a few milliseconds.
2. PreCAC list conversion:
a. When mode switch is triggered:
i. Stop the existing preCAC timer and send ADFS abort command to FW.
b. When mode switch is completed:
i. Unify/separate the preCAC list if the target mode is DBS/DBS_SBS
respectively, using a single API.
ii. Start ADFS again.
3. Radar detection lock:
a. While detecting radar, acquire a lock to avoid handling user triggered
mode_switch during this process. Release the lock once radar
processing is completed and CSA start is triggered.
4. Radar detection/CAC completion defer during mode switch:
a. While detecting radar or CAC completion, check if mode switch is
in progress. If yes, defer the processing and wait for mode switch to
complete before handling the events.
b. Note: Precedence is Radar over CAC, i.e., if CAC processing is waiting
and radar is received, CAC completion is no longer handled.
CRs-Fixed: 2580403
Change-Id: I506f3b569bad2e351c6f336e50f203cf5fa8b223
Pine supports restricted 80+80 MHz only on cfreq=5690 and cfreq=5775. If AP
detects RADAR in this channel, it chooses new 80+80 MHz random channel
which is not supported by Pine because, notion of 80+80 is not present in
current channel in regulatory component. Hence, as a temporary fix we
change the invalid 80+80 MHz channel to 160 MHz or lower.
Change-Id: I749607236a1dd7b9c7aa93ff889b65adcbb4191c
CRs-Fixed: 2570057
Remove dummy function dfs_remove_cur_ch_from_list(). This logic is already
implemented in dfs_apply_rules().
In dfs_apply_rules()/dfs_apply_rules_for_freq(), skip all the HT20 channels
of the curent channel when DFS_RANDOM_CH_FLAG_NO_CURR_OPE_CH flag is set.
In dfs_prepare_random_channel_for_freq(), allocate correct size of memory
for leakage_adjusted_lst array.
Use DFS_80_NUM_SUB_CHANNEL macro instead of DFS_80_NUM_SUB_CHANNEL_FREQ to
choose correct 80MHz channel.
Change-Id: Ie318d667ff1b0caef3032b7aa57f0ddfb7e1f1a7
CRs-Fixed: 2570055
As FW requires, send WMI_PDEV_DFS_PHYERR_OFFLOAD_DISABLE_CMDID when there
is no beaconing session in DFS channel for FW which supports dfs offload.
Change-Id: I73b86328be6eb132de70bd10406495fbaefcab67
CRs-Fixed: 2554083
When tgt_dfs_set_precac_state API is called, the dfs_precac_active
boolean is set to false for all pdevs. This results in preCAC
being stopped for all pdevs in DBS_SBS mode when one of the
pdev becomes inactive.
Reset dfs_precac_active flag only for the calling pdev and
set the global boolean 'precac_state_started' to false only
if all the individual pdev flags are inactive.
Change-Id: I73fcacb911a5eb9028b03aa1c86775a66f2a7fc9
CRs-Fixed: 2556734
Implement a frequency API based dispatcher function to retrieve
the precac channel state of a given channel frequency.
Change-Id: Iefd70c8b6e60a42f8dc95db5f8a2e8c66ae013ea
CRs-Fixed: 2526372
To avoid IEEE channel number space collision,
use freq in structure dfs_acs_info.
Change-Id: I48813d12819f03495f196e634e9fcb422105f304
CRs-Fixed: 2555897
To avoid "channel number" collision that was introduced after
6Ghz band was added to the driver, frequency based DFS callbacks are
registered with dfs_to_mlme structure.
Change-Id: Id937059329e4df25a49397c1c01251f81afc1fe6
CRs-Fixed: 2526372
To avoid "channel number" collision with the introduction of
6GHZ frequency band, add frequency-based APIs to DFS Core.
Also, do not remove the old IEEE channel-number-based APIs that are still
referenced.
The DFS APIs of Target-IF layer and DFS UTILS in DFS dispatcher layer are
included as a part of this change as they invoke DFS Core APIs and are
dependent.
CRs-Fixed: 2526372
Change-Id: I7a00ca5796e9c81527438c326c2d41de1147ffee
To avoid "channel number" space collision with the introduction of
6GHZ frequency band, add frequency based APIs in DFS dispatcher.
Change-Id: I349093e134b04ee31d046eb4da108522bc74a51a
CRs-Fixed: 2526372
Due to channel number ambiguity with introduction of 6Ghz operation
policy manager APIs are updated to use frequency values instead
of channel number. Update corresponding caller functions to
adapt for frequency usage.
Change-Id: Icf76480cdd0fbd98d9b5f559d9bfdc5d5a35dc7b
CRs-fixed: 2550098
The decision to do CAC when a vap is coming up should be taken based on
the previous channel and current channel. Introduce previous channel
in DFS structure and update it when the current channel is updated.
Use the previous channel and current channel in DFS structure to
decide whether the CAC should be done or not when the vap is coming
up.
Change-Id: Ia359025d5029713c32696dacee5b89618a1c9707
CRs-Fixed: 2538653
