Add HAL APIs to access TX fields to override default flow
classification by hardware.
Change-Id: If2eb0c5a966f87081a7714836c2c4bc0bd47fa86
CRs-Fixed: 3114311
Bifurcate the hal_get_reo_qdesc_size to corresponding lithium
or Berillium platforms.
This can handle difference, if any between them and later enhance
to set the qdesc size based on peer negotiation.
Currently for NON_QOS_TID, the BA window size is hardcoded as
256 for Li and 1024 for Be.
Also modify hal_reo_cmd_update_queue_params to accommodate higher
Block-Ack Window size. For this steal bits from pn_size and use
pn_size values as macros PN_SIZE_XX which is only 3 bits,
instead of 8bits.
Change-Id: If310175da579aa3a47a8b031a1774c6c8982d4b2
CRs-Fixed: 3125986
Added HAL specific api to support tx monitor,
1. to get buffer address
2. get number of users
3. get corresponding structure to handle tx monitor and
4. parse limited TLV tag.
Change-Id: Ic354c76b3bcf5fa454db973c2aa4ee5f9c1b4208
KIWI V2 WBM completion release reason codes are changed to match legacy
lithium release codes. Takecare to enable translation only for KIWI V1.
Change-Id: I094f40440b290ae424b47a7ba176b81ffea6c592
CRs-Fixed: 3132359
Add support to parse the matched user info header
from the PHY TLV for EHT data traffic.
Change-Id: Ic5f47461b4617e087ff95863f4c6fc744266ee29
CRs-Fixed: 3128310
Add support to parse the common user info header
from the PHY TLV for EHT data traffic.
Change-Id: Id7d3359850806ec87945b4213771098121b0ce93
CRs-Fixed: 3094140
For KIWI, when operating monitor mode in 802.11BE,
there can be certain header fields which can be received
as split across multiple TLVs.
Add support to aggregate such split TLVs and decode them
after agregation.
Change-Id: Ia00323a8f9fbe39306b1bbab4afefaa937befdae
CRs-Fixed: 3092820
1. Replenish path issue:
a. when number of required buffers passed to replenish API is '1',
host does not replenish '1' buffer.
b. If no. of available entries in ring are '0', return sw desc
back to pool.
2. 32-bit compilation issue
3. Block ppdu desc deliver API when pktlog is enabled for BE
Change-Id: I79ebf1f84830b4c2f5e5b727e3e08c5ee1870898
In WIN BE chipsets, replace the REO tid
queue programming in FW via WMI with writing to a
Host managed table shared by HW and SW. REO HW will
pick the tid queue address from the table indexed by
peer id and tid number.
Change-Id: I8107ca5116425538329b11ae3519f02b32573bac
Add function pointers to free buffer address stored in status buffer
and support tx monitor in legacy and Waikiki flow.
Change-Id: I28612d388009292ff751fe514183fb801909f485
- Fixes for compilation issues after enabling
monitor 2.0 support.
- change copyright year for all files in the chain.
Change-Id: I885e257bd8ca83850656d8a1f408c1bc34920d7a
CRs-Fixed: 3086483
Add the PPE Tx HAL data structures. Also add
dummy functions for reo2ppe and ppe2tcl rings
intializations.
Change-Id: I31fa61a728535c32ea3678407da8ae39f0d9f48d
For KIWI target, 64-bit timestamp is reported
in the PHY TLVs. use the first 32-bits timestamp
value for the radiotap header.
Change-Id: Ia7d7a6913e4cdca3a1432cc5edbb0348ec8a6857
CRs-Fixed: 3096680
In WCN7850, the tlv header width is 64-bit and the tlv header
start is 8-byte aligned inside the monitor status ring desc.
Add changes to parse the monitor status ring TLV according
to the TLV header width.
Change-Id: I19860b871abbc3037174b9d0ae5ed6e52b1eb736
CRs-Fixed: 3084443
Add 2 hal soc ops, hal_msdu_desc_info_set and
hal_mpdu_desc_info_se for berilliyum datapath.
Attach hal_rx_msdu_ext_desc_info_get_ptr_be to its function
pointer.
Get reo queue descriptor address as a 5 byte value as in
beryllium datapath it is being obtained from rx packet tlv.
Change-Id: Ia58597384e1a3d5eec493b865a88bab4f209502d
CRs-Fixed: 3084532
Use chip ID and destination peer to determine the target soc
and partner vdev for Intra-BSS in MLO case.
Change-Id: I709c52e74426c5e81b50c8063cad7669c0e7002d
Offsets used by host for HTT stats are not aligned as per the
structure declaration given in file htt.h .
Make change to use the correct offsets to get the correct stats.
Also make change for byte count computation.
Also make cleanup changes for FR65817.
Change-Id: I8bc6164cc4994c49536d7277779f25b258be1592
CRs-Fixed: 3082742
In BE architecture, HW provides basic vdev stats support for upto
48 vdevs. For each vdev, there is vdev_stats_id which represents the
id of this vdev on HW. This vdev_stats_id is assigned by host and
is conveyed to HW at the time of REO TID Queue setup for the peer.
Add logic for allocation and deallocation of vdev_stats_id and
convey this id to HW.
Change-Id: If5611bf54d057ccf71c6444b5c79a26eb28df87e
CRs-Fixed: 3067843
Rx patch changes for multichip MLO
1. Create ini for rx ring mask for each chip
2. Configure hash based routing for each chip based
on lmac_peer_id_msb
3. Peer setup changes to configure lmac_peer_id_msb
to enable hash based routing
4. Rx Replenish changes to provide buffers back to owner
SOC of reo ring
Change-Id: Ibbe6e81f9e62d88d9bb289a082dd14b4362252c4
Changes needed for MLO soc attach to pass chip_id,
dp_ml_context from upper layer.
This change also takes care of assigning appropriate
RBM id for IDLE link descriptors based on chip_id.
Change-Id: I8f5f08c524d91942e6e458f048700b7bdd900107
tcp_proto is not set correctly from hal_rx_get_proto_params() API,
currently it is using HAL_RX_TLV_GET_IP_OFFSET, use
HAL_RX_TLV_GET_TCP_PROTO to fix it.
Change-Id: I1f3c6aa4b8f5420f176bda4aff158dcfa2a7ef5a
CRs-Fixed: 3073794
sw_exception bit will be marked in reo dest ring descriptor for
FW re-injected frame, get this bit and save it in skb->cb,
this bit value can be used for FISA further check.
there is no reo_dest_indication field in reo dest ring on beryllium,
so share same cb member for sw_exception and reo_dest_indication.
Change-Id: I2321121be7dda68ed19faca177d868c7e8ba1dbf
CRs-Fixed: 3056156
This change includes below
1) Changes needed to increase Tx rings to 4
2) Use WBM2SW4 ring for rx error in QCN9224
3) memset srng at alloc to avoid populating RBM_id
in per packet path and enable implicit RBM
Change-Id: Icbd5ac2378273b8f3c6adc41c611e29551fff22f
In Beryllium the HW does the ast lookup and match
and sets the intra-bss bit in the msdu_desc_info
structure of reo_destination ring and WBM Rx release ring.
So, change the Beryllium code to make use of this
hardware assistance for intra-bss.
Change-Id: Ic7c89efc741fefe35603082309204fbe3c9a97c7
FW has some usecases when it needs to enqueue frames into hardware. In
BE WLAN chips, some hardware TX desc fields are moved into Tx
banks, hence a TX bank is also needed to queue to HW.
Dedicate a bank for FW usage.
Change-Id: I1f19f0ef85aff4c7592b0f07de4631259da743a6
CRs-Fixed: 3016828
