Currently the T2LM timer is maintained by host.
Code change made to add support to run the T2LM timer in FW.
CRs-Fixed: 3594141
Change-Id: I7eee4800f68b07d5492a0336e3fe8e0db17d2020
Added change to handle TxBF standalone sounding CQI data.
1. Define and handle structure to support new TLV for CQI data.
2. API to extract new meta data TLV added for CQI data
3. API to handle processing CQI data.
Change-Id: If6e654fc03cc5c150b85bc9af487c58b77d78e1d
CRs-Fixed: 3594811
Hopping radar happens on whole band, hope all DFS sub channels are put to
NOL, but F/W only reports single radar event on special freq to host.
When DFS puncture enabled, sub channel marking is enabled, host only put
single affected 20M sub channel to NOL instead of all current bonded sub
channel, AP still stays on current freq for valid puncture bitmap
instead of leave DFS freq.
If the radar is a frequency hopping radar that truly hops over entire DFS
band, then the AP and clients are best served by moving out of the DFS
band. But it could well be that only part of the band is used. It is
difficult to find product specifications with info on the total bandwidth.
Mostly military systems use frequency hopping to avoid jamming. So a middle
ground would be to put full bandwidth of current AP to NOL for FCC type 6
frequency hopping radar.
When frequency hopping radar happens, F/W set flag that full bandwidth need
put to NOL in new added tlv radar_flags of event
WMI_PDEV_DFS_RADAR_DETECTION_EVENT, When find the flag is set, host will
put full bandwidth of current AP to NOL even sub channel marking is
enabled.
To avoid compatibility issue between old/new F/W and new/old host, add a
F/W service bit wmi_service_radar_flags_support and host service flag
is_full_bw_nol_supported.
If the wmi_service WMI_SERVICE_RADAR_FLAGS_SUPPORT is enabled by FW, host
shall set/unset a bit in the host service flag is_full_bw_nol_supported
based on host capabilities. This host service flag is then sent to FW via
WMI_INIT_CMDID.
Change-Id: I6e280ca4ab00dce97c5aec90c7a4b4fc7c4a440a
CRs-Fixed: 3595476
Add support to parse the Max ML Peer ID's parameter received from target
capabilities and update the parameter in global MLO context.
Change-Id: I4118d288a312dc4a18182caf765b0ded014b985a
CRs-Fixed: 3556542
Update version for vendor request 1 and vendor request 2 as
below:
vendor_req_1_version: WMI_HOST_VENDOR1_REQ1_VERSION_4_00
vendor_req_2_version: WMI_HOST_VENDOR1_REQ2_VERSION_3_50
Change-Id: Ib8ff2596c415453c26de3d7d26dce5dceed30556
CRs-Fixed: 3589711
Modify wmi_nofl_info_high definition to print only if
QDF_TRACE_INFO_HIGH_NO_FL debug level is set.
CRs-Fixed: 3570322
Change-Id: I879a9d917ff698aeb6b3e53a85c765a74a902b36
Add support to handle WMI_ROAM_SYNCH_KEY_EVENTID.
WMI_ROAM_SYNCH_KEY_EVENTID is received after roaming to 3 Link
MLO AP when standby link is supported.
Add changes to register handler function pointers and parse
the event.
Change-Id: Iee17560f9f1f3242ef512a550764a9c64319b67f
CRs-Fixed: 3571673
Prepare and Send WMI command to fw to set the rf path. Also, add module
ID for rf path switch for qdf log prints.
CRs-Fixed: 3568221
Change-Id: I7ef0ffe66eaed837424699641d3e5b8537cd0304
Once the FW sends the link switch request to host handle
the request from scheduler thread and send confirmation
back on completion of link switch process with status of
link switch (success/failure).
Add new serialization command type for link switch.
Introduce flags to get the current state of link switch
request, set the state to idle when no link switch in
progress or once the current link switch is completed.
Access to state is protected with MLO dev context lock.
Implement various helper API to:
a) Transition link switch to next state.
b) Get current state of link switch.
c) To check whether any link switch is in progress.
c) To check whether link switch is happening
on assoc VDEV or not.
Introduce a new VDEV flag to suggest the VDEV is in
link switch process and also implement helper APIs to
set/get/clear this VDEV flag.
a) The flag is set at start of link switch, once
the FW request params are validated and before
proceeding for link switch disconnect on VDEV.
b) Clear the flag once the Link switch confirmation
is sent to FW.
Validate the link switch request params:
a) IEEE link ID's received.
b) Check if new connection is part of MLO connection.
c) Check if VDEV is MLO STA VDEV or not.
d) Is VDEV in connected state or not, that means
VDEV is not in transitioning state due to disconnect.
e) Check if any link switch in progress on this MLD
f) Current link ID of VDEV equals the FW params.
If validation is successful, serialize the link switch
command and in the serialization activation start the
actual link switch process.
Change-Id: Ie582650541054c8cf39aaa8316e86a7a40256a15
CRs-Fixed: 3556422
Introduce new twt statusconversion
HOST_ADD_TWT_STATUS_LINK_SWITCH_IN_PROGRESS and
HOST_ADD_TWT_STATUS_UNSUPPORTED_MODE_MLMR for
individual twt in 11be.
Change-Id: I76194ec0172d06c1b176e3afd3a5e66efdd12f4a
CRs-Fixed: 3568732
Extract aux device capability from service ready ext2
event, and report such info to wma/mlme/hdd.
Change-Id: I888624fd3443118ba66fadd7a40fcce4f4b5d521
CRs-Fixed: 3549753
Introduce new vdev parameter WMI_VDEV_PARAM_DISABLE_2G_TWT
in order facilitate FW to change twt operation state for
2.4 GHz link
Change-Id: I35436245c5e0ee113a8fdc2edba42a7978b2683d
CRs-Fixed: 3560314
Driver sends feature set information to fw as
part of wmi init command.
Fill sta dump feature info in feature set bitmap
and send it to fw.
Change-Id: If28cd8f10af2333f0f231f0c4ae659ab20c1358a
CRs-Fixed: 3552909
Add support in driver to check whether F.W supports
dynamic MSDU aggregation size programming to H.W.
Change-Id: Ifb2d41efb23934414cce38753df82e1d15f01e11
CRs-Fixed: 3540531
Add INI to disable AST indication. AST disable flag will be
sent to the target in resource config.
Change-Id: If30cac010681faf06bbcaa2d492d6843e3e675d0
CRs-Fixed: 3544223
Define and initialize new WMIs for v2 ATF.
Rename send_set_atf_cmd to send_atf_peer_list_cmd which
is more appropriate.
Change-Id: Icab17703a4ccea8e2b859bf6a18387fbd2234226
CRs-Fixed: 3542065
Extract WMI Service bit for ATF 512 Max client support advertised by
Firmware as part of wmi service ready.
Add rxops functions as for upper modules to get it.
Change-Id: I51e8dcaad96bdd29eb6fd4c37b0917127696ede6
CRs-Fixed: 3551661
Add support to send link recommendation command. This will
allow the user to pick the link that they want to utilise.
It is now the WFA prerequisite for AP.
Change-Id: I7d4459a65ce599aa5f674a3cc4a54185595ede40
CRs-Fixed: 3534151
Add nstrinfo in ml_partner_info and parse sta info.
Add nstr_info in ml_peer_ctx and peer_assoc_params
and send to FW
CRs-Fixed: 3483776
Change-Id: I255fc671b84a2048c6057a61a6de8d81db36c681
Add wmi pdev param support for long range phy param like cts timeout
slot time etc as part of enabling user config.
Change-Id: If1f3d86e09e634cde43ef8211831511781e96672
CRs-Fixed: 3520970
Add support in driver to check if FW supports per link stats
in case of mlo connection, using the wmi service event
WMI_SERVICE_PER_LINK_STATS_SUPPORT
Change-Id: I85ea50877455efc3646d3b1892ce855dc07b1dbf
CRs-Fixed: 3520338
Add WMI command support to force power save on all the
active MLO links for a defined number of beacon periods.
Force power save allows the firmware to suspend STA links
for X beacon periods and remain asleep even if the AP
advertises TIM as opposed to regular power save mode where
STA links wake up if the AP indicates that it has buffered
data to send.
Change-Id: I381a107f3f5f479b0eee4f526a49d6fc886aced0
CRs-Fixed: 3509543
Firmware sends NDP_HOST_UPDATE event as an immediate response to this
request and starts cleaning peers one by one. Once an NDP session is
ended (indicating NDP_END to peer + internal cleanup), firmware sends
NDP_END_IND to host.
Currently, host driver stops the wait timer and change state from NDP
end to disconnected upon receiving the NDP_HOST_UPDATE. But firmware
might still be in the process of NDP cleanup. As the NDP_END_ALL
context is unblocked, driver may send NAN disable request to firmware.
This may cause inconsistency in firmware state machine and firmware may
drop the ongoing NDP_END request. So, peer doesn't get the NDP_END frame
in such cases.
Unblock the NDP_END_ALL-wait call only upon last NDP_END indication to
avoid such issues. This change moves the major functionality of
NDP_HOST_UPDATE processing to last NDP_END indication. Cleanup/remove
the processing of NDP_HOST_UPDATE as it's not needed anymore.
Change-Id: I00e73d211de4626484ffb2483c00adce1a7302c1
CRs-Fixed: 3512923
Add 'max_simultaneous_links' in peer_assoc_params
and send it to FW via peer_assoc_add_mld_params.
Change-Id: Ie4c3492cf03ef43e1bb02122019cda3679fb5f3a
CRs-Fixed: 3476565
Add structure peer_vlan_config_param for
WMI_PEER_CONFIG_VLAN_CMDID to support vlan peer config
Change-Id: I2f93ce2bd10d1920d33ee0e26d1b7d344813852b
CRs-Fixed: 3492156
Add APIs to init the TSF sync capability based on
WMI_SERVICE_MLO_TSF_SYNC service bit sent from FW,
per ML group.
Change-Id: I5dad3fef7ebfa2af330b95d45cac3bef862f46f0
CRs-Fixed: 3491364
Add support to trigger UMAC reset with mode1 teardown request
for mode1 target recovery SSR.
Change-Id: Ib2d1679162a2084488081c76f6753287a6e4d5c4
CRs-Fixed: 3458369
In case of MLO connection, firmware sends each vdev's
status information using extended vdev stats event.
Add support in driver to extract it.
Change-Id: I95f2a96cb7034b5b070cc6f37a97591e01e5893a
CRs-Fixed: 3483730
