Logging macros already takes care of adding function name.
Hence, delete the occurrence of __func__.
Change-Id: I44ef5d7f030eba16decb9611f16001c6e9d42b3b
CRs-Fixed: 3492505
The to_fw bit in HW descriptor is not set for exception
marked skb that is scattered across multiple pages. In the
case of direct link, this would result in crash as TQM
bypass mode is used for direct link vdev.
Fix is to set the to_fw bit to 1 in HW descriptor for
exception marked skb.
Change-Id: I060ad4ad59f85e09f39bd85080e0b3138a39402c
CRs-Fixed: 3490554
Add Tx TLV recording support for monitor 2.0
Also add support to control Rx and Tx TLV
recording
Change-Id: I27a0d2c9ea8bdfacd46e6b7188b45b08ed47bbcd
CRs-Fixed: 3422787
With Single Netdev Unified and Hybrid Mode,
the calculation of vdev stats is changed as
per the mode. For LI platforms the path
to get vdev stats is still same while for
BE the vdev stats config path is different.
Introduced Arch ops to handle this diversion.
Change-Id: If4f0f49e78d35126942cd3f1872a5856e4d0f5ba
CRs-Fixed: 3482567
Add vdev stats support for DP MLO Unified
and Hybrid Mode.
Add new CDP API for getting vdev stats for
NON_MLD interface.
Add support to get vdev stats for specific
vdev which is a part of MLO.
Change-Id: I72c8b25958649d473e1b65cee21810cd86951187
CRs-Fixed: 3455607
When a new MSDUQ is instantiated for a peer, additional
dynamic AST indices are allocated.The new AST indices
should be used in subsequent MSDUs.
Handle the HTT message to update the dynamically allocated
AST indices.
Change-Id: Iea24e1f3523006f40c781abdc3c176ba25ecd5a5
CRs-Fixed: 3449259
Currently the packet tx handling for AP-multipass
assumes wlan repeater to be present. For targets like
qca6490, kiwi etc, wlan repeaters are not supported in
the network topology.
Hence to skip unwanted tx packet copy in per-pkt path,
move the code to handle packet tx to waln repeater in
multipass mode under a feature macro.
Change-Id: I8bb3fbc4f3de76c3ae04978d12d369fad5d2553f
CRs-Fixed: 3491508
ETHERTYPE_VLAN_LEN is defined in enet.h, which is not being
included in dp_main.c, which can lead to compilation error
if the MULTIPASS feature is enabled.
Include the enet.h header file for ETHERTYPE_VLAN_LEN macro
definition
Change-Id: I589123a0e2161486a430c6e8d6ca18e5907252d4
CRs-Fixed: 3494435
Update rx_fast_flag for Rx protocol tag feature irrespective of
enhanced_stats_en flag.
Change-Id: Ibea2869cc182ad7d1683692d86b01de542cbddd0
CRs-Fixed: 3481654
In extap mode if the received packet matches with mld mac address drop it.
for non IP packets conversion might not be possible,
due to that MEC entry will not be updated, resulting loopback.
Change-Id: Ibec080b619e9b0a8068e1c90acbcc144d44d8f54
CRs-Fixed: 3485362
IEEE80211_* macros are defined in WIN specific header file which is not
available on MCL side, Hence replace these macros with QDF_IEEE80211_*
macros available in common header file
Change-Id: Ic2caaebacd9edded23aebefab87cd82dbbb06974
CRs-Fixed: 3415721
Separate out the common function implementing both RX 2.0 and TX 2.0
functionality in to RX 2.0 and TX 2.0 separate functions.
Change-Id: I29337aca9851dce1888a492a9534992277f595b5
CRs-Fixed: 3427301
Currently WIN supports RX/TX 2.0 but MCC needs to support RX 1.0 and
TX 2.0. Hence implement the mon_ops callbacks as array of callback
pointers. Index 0 for 1.0 and Index 1 for 2.0.
Change-Id: I777b47be3af86f0b762b3563ef56204809a9a7ee
CRs-Fixed: 3427297
Currently QCA_MONITOR_2_0_SUPPORT macro is used for both TX and RX 2.0.
but on MCC side, only RX 1.0 is supported and as part of this feature
TX 2.0 need to be supported.
Enabling QCA_MONITOR_2_0_SUPPORT will enable both RX 2.0 and TX 2.0, but
to support RX 1.0 and TX 2.0, we need to separate out code under
QCA_MONITOR_2_0_SUPPORT to TX and RX 2.0 macro.
As part of this change, introduce separate macros for TX 2.0 and RX 2.0
and move the common code under both macros.
Change-Id: I7ef7e488800934291538a0bca9acd21e28901214
CRs-Fixed: 3415740
-Support to route IGMP packet to correct netdev coming from
legacy and mld sta.
-Support to detect mld model based on ini setting
Change-Id: I10ea5af9a4315642b262c8404d7bebd88ee06ab1
CRs-Fixed: 3467808
Make sure the Umac reset state is updated when
the trigger is received only after checking
Umac reset in progress flag.
Change-Id: I2c6ac68bee5b69b1f083a109646cb6bf61d8cdd6
CRs-Fixed: 3487388
Currently driver obtains RX MCS index from RX MSDU TLV END of a
data frame. According to the specification, the MCS index should
starts with 8 rather than 0 when NSS=2 in HT mode. However, the
original RX MCS index from HW starts with 0, thus SW needs to
get a final MCS index by adding an offset when NSS=2 in HT mode.
Change-Id: Iba5f9976958233fc283513caf0184e59774ab50a
CRs-Fixed: 3471953
As ppe_ds is not supported on QCA5332 platform, in
case of MLO peer always setup ppe peer using primary
peer
Change-Id: Icd05b69c07c05fe2fc793f49fcf28b5d58bc8bb6
CRs-Fixed: 3480359
Add fix to update msdu start bit and other bits in network buffer.
Here is the list of bits set in network buffer
a. msdu start bit,
b. msdu end bit,
c. packet is MCBC and da bit is set
d. da valid bit is set
e. sa valid bit is set
Change-Id: I2abf346de36a7f5ac7f86b33615145bb02065dc2
CRs-Fixed: 3479230
handling multicast packets in the case of proxy arp
along with MLO MCAST.
1. stamp the host inspected bit for GSN based packets.
2. trigger dp_tx_proxy_arp from the reinject handler.
Change-Id: I8aea1e4fd4e61f4cc6a5dd6d8b5151c1a9bf2fac
CRs-Fixed: 3465975
It is observed that in some corner cases msdu count received
in montior destination ring descriptor is unreliable as a
result some of the link descriptor and associated monitor buf
descs are not returned. This change return such missing link/buf
descriptors and free associated buffers.
Change-Id: Iaad476b8e7a0372122981fd29c1f6e4685137817
CRs-Fixed: 3483157
Currently the code to support Multipass on SAP is
present along with the code to support WDS. Hence with
the code in its current state, we will not be able to
enable Multipass support without enabling WDS.
Move the multipass support code out of the WDS support
code, to be able to enable Multipass for chipsets which
do not use WDS.
Change-Id: Id17035f1ada9bde56ca2c61fd4688fa3454b0b11
CRs-Fixed: 3479991
Free the tx descriptors borrowed by direct switch
back to regulartx desc pools.
Change-Id: I2898e57ce5eff54c1787dbebd166482d9fbfc585
CRs-Fixed: 3444334
