Add a QCA vendor subcommand QCA_NL80211_VENDOR_SUBCMD_CONFIG_TSPEC
to add and delete TSPEC in STA mode.
The attributes defined in enum qca_wlan_vendor_attr_config_tspec
are used to encapsulate required information.
Change-Id: Ifaba68b6619a3f6b775d2150740e7d6a2645493c
CRs-Fixed: 2686133
Define QCA vendor attributes for SET(GET)_WIFI_CONFIGURATION to
dynamically configure capabilities for TX A-MSDU and RX A-MSDU.
Change-Id: Idcf7de2172cbf0b6710a7256b925939a2321e91c
CRs-Fixed: 2687224
Add an attribute QCA_WLAN_VENDOR_ATTR_OEM_DATA_RESPONSE_EXPECTED
to get the response for the queried data.
Change-Id: Icb3fc7072cf589cf60a7c68b7c1fa74e51dadab8
CRs-Fixed: 2699102
Map qpower vendor command to advanced_power_save_mode in order to support
users of HST as well as HSP.
Change-Id: I38de5981dca384b666b5086727e3da741f0cd4e3
CRs-Fixed: 2676713
Some targets have a single synthesizer and it allows
a single Spectral detector to scan in 160 MHz /165 MHz.
Enable Agile Spectral scanning in 160 MHz / 165 MHz for
such targets. Agile creq2 will be populated in the WMI
command after WMI interface changes are merged.
CRs-Fixed: 2648480
Change-Id: I8522cbeeab29ac41479e3041eea376b081c0758a
When setting BT coex mode, the config was not updated for all
when there are multiple vdevs.
Modify the code to update it for all vdevs.
CRs-Fixed: 2667933
Change-Id: Ibad3adf44bef6842a12cbe7e46050b693ed474d6
The roam sequence in LFR-3.0 is roam scan start notification
from firmware followed by roam start indication and then
roam synch,roam synch frame events. Roam start is sent
after candidate selection and host driver will disable
queues when roam start is received.
But for emergency roam trigger, firmware sends roam start
indication directly without notifying roam scan start to disable
data path queues immediately after deauth received from the AP.
So roam start is received before roam scan is started at firmware
and before candidate selection is done.
After roam start notification, host sends scan abort for all scan
on vdev by setting scan command request type to
WMI_SCN_STOP_VAP_ALL. This results in roam scan getting aborted at
firmare in emergency deauth roaming case and roaming fails.
Introduce new vdev id value based on which the scan module will
abort only host triggered scans setting the flag
WMI_SCN_STOP_HOST_VAP_ALL in the scan request.
Change-Id: I3a162c55d4a008ff986fd957bed395b39c060bb5
CRs-Fixed: 2636410
Currently he operation info is not sent to user space as
part of the response of get station info command.
Add support to send the he_operation with the new vendor
attribute QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_HE_OPERATION.
Change-Id: Ib4bab7b7b2aff688293c85f8574d9f2c306f00f0
CRs-Fixed: 2664347
In wlan_crypto_save_key store igtk def index, bigtk def index and
igtk key type in crypto priv.
Change-Id: I96161a6dd376e7e80f88da00c891d15a5645cfa7
CRs-Fixed: 2661197
Populate number of Spectral detectors per BW in the
Spectral capability vendor command response.
CRs-Fixed: 2659587
Change-Id: I2eba5df02a5f70556d65e689aece1f0fbd8bba93
Add an attribute QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_FREQUENCY_2
for describing the secondary 80 MHz span of agile spectral scan.
CRs-Fixed: 2659496
Change-Id: I751513cb248c42dd7c59d7d979fc571459e48ad1
Since netdevice name retrieval is tied to OS,
move it to qdf OS layer instead of doing it
inside CFR ucfg layer.
Change-Id: Ia9dcbdf56bcb36a1f0788be9964ea87fdf5beb3f
CRs-Fixed: 2643682
In osif_akm_type_crypto_mapping DPP, CCKM, OSEN and OWE AKMs are not
added. So AKM are not added in crypto module.
So add DPP, CCKM, OSEN and OWE enums in osif_akm_type_crypto_mapping.
Change-Id: Ie9e092f591ea03026cbf360abe40c663bdd078fd
CRs-Fixed: 2650380
Add QCA_WLAN_VENDOR_CFR_NDPA_NDP_ALL in enum
qca_wlan_vendor_cfr_capture_type. This capture type requests all NDPA
NDP frames to be filtered.
Change-Id: I2003975012ad1c486b18a460c8ef2e691379d3d9
CRs-Fixed: 2649260
Some CFR attributes are used frequently with conditions, so change them
from required to optional.
Change-Id: I835906d314bfb4d94100ba7794603de1c2dbcc8d
CRs-Fixed: 2649263
Enhanced channel frequency response supports to capture channel status
information based on RX. Define previous CFR as version 1 and enhanced
CFR as version 2. If target supports both versions, two versions can't
be enabled at same time. Extend attributes for enhanced CFR capture in
enum qca_wlan_vendor_peer_cfr_capture_attr.
Change-Id: If9a5e387f03981eb75f98138fe555f4489ccb377
CRs-Fixed: 2641774
Add a subcommand for Channel Frequency Response (CFG) Capture
Configuration and define attributes for configuring CFR capture
parameters per peer and enabling/disabling CFR capture.
Change-Id: I94869b06f8e7eb499ebed8d49e99b342907a9aa1
CRs-Fixed: 2647239
Add more hang reason codes for the hang reason in the
QCA_NL80211_VENDOR_SUBCMD_HANG events. This also introduces the
attribute QCA_WLAN_VENDOR_ATTR_HANG_REASON_DATA to carry the required
data for the respective hang reason. This data is expected to contain
the required dump to analyze the reason for the hang
Change-Id: I4912f896d394667055937faf68c9ceb32a469978
CRs-Fixed: 2650292
Host driver processes cld80211 vendor subcmd
CLD80211_VENDOR_SUB_CMD_OEM_DATA and send
response in NLA format. Peer status indication
is also sent in nla format
CRs-Fixed: 2597282
Change-Id: I94f1fb7939141952ef92dbb7d3a130ba20d31608
Host driver processes cld80211 vendor sub command
CLD80211_VENDOR_SUB_CMD_GET_CH_INFO and respond with
NLA type CH_INFO response
CRs-Fixed: 2595374
Change-Id: Ibe6f2431ac1cae6e4560ec11424434b4f1cf8b76
Host driver processes cld80211 vendor sub command
CLD80211_VENDOR_SUB_CMD_GET_CAPS and respond with
NLA type CAP response
CRs-Fixed: 2595140
Change-Id: I5a6aa1fac537ca618404520b81c541a20dafd6fb
Enhance logs for PNO scan to remove duplicate
or unwanted prints and keep only useful logs to debug.
Change-Id: Ibe24714e925a00933911c801685528849e160480
CRs-Fixed: 2636641
Remove static from nla_policy btc_chain_mode_policy in correspondence to
the change to add policy attribute to BTC_CHAIN_MODE vendor subcommand.
Change-Id: Ie33542199d27f6b9d8ea5e0a1a063b71ecb7fd94
CRs-Fixed: 2635059
Remove static from nla_policy spectral_scan_policy in correspondence to
the change to add policy attribute to SPECTRAL_SCAN vendor subcommand.
Change-Id: I764a51f5c1355cb0c3dd2096e6dc7ee332b2f3d6
CRs-Fixed: 2634075
According to new changes in kernel 5.2 version onwards, driver has to
provide the policy for a NL command to be verified against while
registering wiphy to the kernel.
To accommodate these changes, add policy to the following vendor
command that is being registered in the driver.
QCA_NL80211_VENDOR_SUBCMD_ABORT_SCAN
Change-Id: I7cd4e6c50a48580a124e36c32b9cbebe557c04bf
CRs-Fixed: 2621311
Add an attribute QCA_WLAN_VENDOR_ATTR_SCAN_DWELL_TIME for specifying
dwell time in the QCA vendor scan command. This is a common value
which applies across all frequencies requested in the scan.
Additionally, update the existing definitions in enum
qca_wlan_vendor_attr_scan to the exact code upstreamed.
CRs-Fixed: 2633010
Change-Id: I09feccc99fb8e53538d495345eda9744e36fc5b4
According to new changes in kernel 5.2 version onwards, kernel takes
care of validating the NLA policies as provided by the driver. In this
case there is no need to re-validate the same in the driver.
Add a stub to return true for NLA parse in case the kernel version is
greater than equal to 5.2
Change-Id: Iea1fdcac3000ede2f8b9398cb85443e545cdd3f0
CRs-Fixed: 2632534
According to new changes in kernel 5.2 version onwards, driver has to
provide the policy for each NL command to be verified against while
registering wiphy to the kernel.
To enable support for this, define a new macro VENDOR_NLA_POLICY_NESTED
taking care of the version compatibility.
Change-Id: I6aec53e94c57434f8e68b936ad5422248c3fa167
CRs-Fixed: 2632081
According to new changes in kernel 5.2 version onwards, driver has to
provide the policy for each NL command to be verified against while
registering wiphy to the kernel.
To enable support for this, define a new macro taking care of the version
compatibility.
Change-Id: I0bf7153d1889e5b31c07d6bf4c7a95f5e72dd93c
CRs-Fixed: 2632019
There is memory leak in get_station_stats_cb:
priv->vdev_summary_stats, priv->vdev_chain_rssi,
priv->peer_adv_stats. But the “request” is not leaked,
that means the “.dealloc” should be called.
The suspect is the get_station_stats_cb was called two
times with same cookie (request) before the "request"
was freed, that caused the priv->vdev_summary_stats
and the others two member of "priv" were overwritten,
and then memory leaks.
From the cp stats components there are multiple places
to call ucfg_mc_cp_stats_reset_pending_req to reset the
unused pending.req(has a cookie) to zero. The zero
cookie may be used in again.
Change the ucfg_mc_cp_stats_reset_pending_req API to do
atomic operation of "reset" and "get" last pending
request.
Change-Id: I5efb7efec4da1edc0aab33b940dc126012a3f12e
CRs-Fixed: 2622444
This attribute enables/disables the host driver to send roam reason
information in the reassoc request to the AP in the same ESS.
Change-Id: Ie2606012c0487936dd0b436f0d6a75d2e115f4b4
CRs-Fixed: 2627261
Add new attributes for getting the Beacon frame IEs and the
disconnection reason codes through get_sta_info vendor command.
Host driver provides this information in STA mode.
Add new attribute to get assoc request IEs of the disconnected
peer. Host driver provides this information in SAP mode.
The host driver shall give these attributes as a response to the
vendor command QCA_NL80211_VENDOR_SUBCMD_GET_STATION.
Add the below attributes in to be in sync with userspace,
QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_TX_FAILURE
QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_AVG_RSSI_PER_CHAIN
QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_TX_RETRY_SUCCEED
QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_RX_LAST_PKT_RSSI
QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_TX_RETRY
QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_TX_RETRY_EXHAUST
QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_TX_TOTAL_FW
QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_TX_RETRY_FW
QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_TX_RETRY_EXHAUST_FW
Change-Id: If2727ea4ecbb157035c0f4a989a1a936a5bca64c
CRs-Fixed: 2624843
This acts as an event from the host driver to the user space to notify
the driver specific reason for a disconnection. The host driver
initiates the disconnection for various scenarios (beacon miss, Tx
Failures, gateway unreachability, etc.) and the reason codes from
cfg80211_disconnected() do not carry these driver specific reason codes.
Host drivers should trigger this event immediately prior to triggering
cfg80211_disconnected() to allow the user space to correlate the driver
specific reason code with the disconnect indication.
Change-Id: I6337c02a3508c7ce282f0e3e947d7592e8550308
CRs-Fixed: 2624841
This attribute aims the STA to send the Beacon Report response
with failure reason for the scenarios where the Beacon Report
Request cannot be handled.
Change-Id: I1b57d1c810deee4545c9a3b84b45ab5bd539d9bb
Crs-Fixed: 2622023
This acts as a vendor event and is used to update the information
of a station from the driver to userspace.
Add an attribute for the driver to update the channels scanned in
the last connect/roam attempt.
Change-Id: I3e87292d6ef00c0242cb583183de2b441352c8a5
CRs-Fixed: 2622092
Add an attribute QCA_WLAN_VENDOR_ATTR_RTPLINST_PRIMARY_FREQUENCY for
primary channel center frequency in the definition for Representative
Tx Power List (RTPL) list entry instance. This is required for 6 GHz
support, since the 6 GHz channel numbers overlap with existing 2.4 GHz
and 5 GHz channel numbers thus requiring frequency values to uniquely
identify channels.
Mark QCA_WLAN_VENDOR_ATTR_RTPLINST_PRIMARY as deprecated if both the
driver and user space application support 6 GHz. For backward
compatibility, QCA_WLAN_VENDOR_ATTR_RTPLINST_PRIMARY is still used if
either the driver or user space application or both do not support the
6 GHz band.
Change-Id: I71c60aa9512bd183eaf73e1bffa57cab0d5b40c5
CRs-Fixed: 2612147
This change introduces the vendor event
QCA_NL80211_VENDOR_SUBCMD_REQUEST_SAR_LIMITS_EVENT.
Host drivers can request user space application to set SAR
power limits with this interface.
Change-ID: I15cf651c722bf828ba9012d81d99922c39a9e1fc
CRs-Fixed: 2615364
1) Enable DDMA support, FFT bin length adjustment SWARs
2) Skip 16 bytes of padding added after Spectral summary report.
3) FFT report header length is 24 instead of 16 in Pine.
4) Max FFT size is changed to 10.
CRs-Fixed: 2608215
Change-Id: If32a8995f814140f5b61041031fb842d01d24c94
Add a QCA vendor sub command QCA_NL80211_VENDOR_SUBCMD_THERMAL_CMD
to implement thermal mitigation. Different operations required to
implement this feature can be specified in
QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_VALUE,
QCA_WLAN_VENDOR_ATTR_THERMAL_LEVEL.
Userspace requests the driver to enable/disable thermal mitigation
based on the thermal state of the device and wlan host performs the
required appropriate action. wlan host driver maps the thermal level
provided from userspace via vendor command to corresponding duty
cycle off percent value and duty cycle value,send
WMI_THERM_THROT_SET_CONF_CMDID cmd to FW.
Make changes to perform vendor command handling, mapping thermal level
to duty cycle value and communicating the thermal information to FW.
Change-Id: Idc9c87dcb4275122980713471544baa23e705a53
CRs-Fixed: 2610403
During scan request from framework wlan_cfg80211_scan gets
invoked. If the cfg80211_scan_request parameter has number
of ssids set to zero then driver will set the scan mode to
passive mode. This will result in fw doing passive scan
instead of active scan. Probe request will not be sent to
discover the peer. This will sometimes result in failure
to discover P2P GO peer.
Set the scan mode to active mode in scan request message to FW.
Change-Id: Ic28757cb69ec62e554ac8baccce17cac504a0bef
CRs-Fixed: 2606614
Add active and passive scan dwell time parameters to cfg80211 scan
request API.
Change-Id: I39f479d7b941e4671f1ad4495ab48031153dd5e7
CRs-Fixed: 2598504
