Support has been added in common code to register both
common tx ops and MC/WIN specific tx ops. Add support to
register and tx ops for MC specific stats.
Change-Id: I4e5263e4685a707008ec3c5e96f50c707b071fe9
CRs-Fixed: 2851256
Periodically request pdev stats from FW to receive channel noise floor
information after monitor vdev has been brought up, based on the band
currently being sniffed. Use the band information as a secondary parameter
when sending periodic request to fw so a single noise floor value is sent
to host. Pass this noise floor information to dp_pdev to be populated in
radiotap header.
Change-Id: I488e4985392cb646ffdee914359fa995dbeb025e
CRs-Fixed: 2833458
Currently, Stats request commands are sent over qmi right from the
target suspend request is sent to FW. This is leading to a crash in
FW since it is trying to access PCI when it is in suspend state.
To address this, send stats request over QMI only after the ack is
received for the target suspend command.
Change-Id: I1b2b6a60c5d8c7ec4375d328e58a66d749794e3f
CRs-Fixed: 2835903
Use WMI_RX_SERIALIZER_CTX context for thermal event handler.
The default context is tasklet, it may cause issue when interact
with OS interface.
Change-Id: I349412c2afee9a081f0d38704541f77b5e4569f4
CRs-Fixed: 2824461
In mission mode, add support for virtual add/del monitor
mode interface. In addition to STA vdev, create and maintain
a new vdev for monitor interface.
Change-Id: I91ea8e56976cce92f9b1ae308d4bd0fb30815366
CRs-Fixed: 2818499
Since new rso ROAM_OFFLOAD_V1 path is enabled, remove
the old rso path code for cm/wmi roam related files.
Change-Id: Iec350f032c3e037204f560199d4a6e258ac02688
CRs-Fixed: 2810145
Roaming between different PMF option APs has following issues:
1. Roaming between Optional -> Disabled -> Optional
When STA roam to optional, PMF is set to False from STA in reassoc
request and all management pkt not secured.
2. Roaming between Required -> Disabled -> Required
STA not able to find candidate AP when tried to roam to AP with PMF
Required.
Root cause: When LFR3 roam happens, vdev_crypto_params will be reset
including rsn_caps 11w PMF, if new AP hasn't enabled PMF, vdev rsn_caps
11w PMF is disabled too, and passed to F/W. Then F/W think DUT STA
doesn'tsupport PMF, then failed to roam to AP with PMF Required and
enabled.
Fix:
Get self-capability of 11w PMF from connected profile and pass to F/W in
WMI_ROAM_SCAN_MODE by wmi_fill_rso_tlvs after roaming.
Move target_if_cm_roam_fill_11w_params to csr_cm_roam_fill_11w_params,
put protocol part to csr connection manager.
Change-Id: I543799385ec8c0ec7afdf64e2310c24758305095
CRs-Fixed: 2807454
Stats event from target might have several sub events, and some event
has no peer stats but have adv/ext2 peer stats.
Check ext/ext2 peer stats even no peer stats in
target_if_cp_stats_extract_peer_stats(). Fix copy adv stats size error
in tgt_mc_cp_stats_prepare_n_send_raw_station_stats(). Although
get_station_stats_cb and get_peer_stats_cb is union callbacks,
better to assign to get_station_stats_cb because it is for
TYPE_STATION_STATS.
Change-Id: I0bead0cbb8b549cc538ef4a7327f0a8303c90bd1
CRs-Fixed: 2801842
Handle firmware thermal stats event and populate the thermal
information to upper layer with vendor command event.
Change-Id: I83286367ab542c08a205a7636f3d03189b0500e5
CRs-Fixed: 2786623
Change return type of following APIs from int to QDF_STATUS.
wmi_unified_register_event()
wmi_unified_register_event_handler()
wmi_unified_register_raw_event_handler()
wmi_unified_unregister_event()
wmi_unified_unregister_event_handler()
Change-Id: I534b499edbcfec6eddea0e9ed48f9eb1a2e872c8
CRs-Fixed: 2791275
To discard 5G candidates based on RSSI threshold, Introduce
a new INI "min_rssi_for_2g_to_5g_roam" to configure the RSSI
for High RSSI Trigger.
Min: -120
Max: 0
Default: -70
Change-Id: If4545296ef1b53d18b8ae4abf12d450f5e690240
CRs-Fixed: 2789017
In the Rome IPA case, it need wlanhost side to
enble/disable intrabss by WMI_VDEV_PARAM_INTRA_BSS_FWD.
If set to 1, the ip data transfer between two wlan clients
should be:
wlan client1 -> wlan fw -> wlanhost -> wlan fw-> wlan client2.
If set to 0, the ip data transfer between two wlan cleints
should be:
wlan client1 -> wlan fw -> ipa -> wlan fw -> wlan clients2.
Change-Id: I105ddbdb58f2cd01bdf94521bd7934508889de5d
Currently the roam scan scheme for each trigger is hardcoded to
either full scan or partial scan followed by full scan. Based on
the new requirement for home scenario,the user space configures
roam scan scheme for various triggers. Add support to send scan
scheme type for indvidual roam triggers enabled from userspace.
The default value of roam scan scheme can be modifed for
below roam triggers:
WMI_ROAM_TRIGGER_REASON_PER,WMI_ROAM_TRIGGER_REASON_BMISS,
WMI_ROAM_TRIGGER_REASON_LOW_RSSI,WMI_ROAM_TRIGGER_REASON_BSS_LOAD,
WMI_ROAM_TRIGGER_REASON_BTM
Change-Id: If8b185897b813afc44af362d31172705ea4d7b5c
CRs-Fixed: 2785233
User sends wfa test configs to host using vendor command
QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION. Host parses the
vendor command and sends wfa test configs to FW using WMI command
i.e. WMI_WFA_CONFIG_CMDID
Change-Id: I5aa0bc8b0a0064828b48368e47d53a5ad5e7ff2f
CRs-Fixed: 2772013
Add vdev id in RSO stop commands to make sure that command is sent
for proper vdev. Also add vdev id in all RSO commands logs
Change-Id: Iefa1e8ba177a64e141726ebaef15b250446a0af2
CRs-Fixed: 2789615
qdf_mem_malloc() function already takes care of logging the
caller function name and line number in case of any allocation error.
Hence there is no need to add the error log again.
Getting rid of these unnecessary logs reduces driver memory footprint.
Change-Id: If0b9425f82f9ed793c7639c0ed09eb1f868b6d5c
CRs-Fixed: 2781932
In the process of rso update config, need to send roam
scan_mode/deauth/idle/trigger commands when rso enabled.
Another fix is to call csr_cm_roam_scan_offload_fill_rso_configs()
with ROAM_SCAN_OFFLOAD_STOP in wlan_cm_roam_fill_stop_req().
Change-Id: Ibcc2ab5d7da1bf838b386e0e1e486cd43072225a
CRs-Fixed: 2779549
As part of WOW feature in WCN6750, send HOST wake up
to FW over QMI instead of WMI. To send HOST wake, add
PLD layer and call platform driver API to send QMI
EXIT_POWER_SAVE to FW.
When FW receive EXIT_POWER_SAVE QMI, it will implicitly
consider that it also received HOST_WAKEUP_FROM_SLEEP
and send ACK for it through CE2.
Change-Id: Ia0a3f4c15662f9ee58649f5c6de965f65aeafe32
CRs-Fixed: 2779370
Host sets WMI_REQUEST_PMF_BCN_PROTECT_STAT bit in stats_id param of
WMI_REQUEST_STATS_CMDID command. Firmware supporting pmf beacon
protection stats responds host with stats in wmi_update_stats_id
event. Host extracts PMF beacon protection stats from wmi_update_stats_id
event. Host adds PMF beacon protection stats in the response of vendor
command QCA_NL80211_VENDOR_SUBCMD_GET_STA_INFO for STA mode.
Change-Id: Ib3cb06e03dbccdb9fa1782d414ed734bd97aa309
CRs-Fixed: 2705236
Add debug logs on the sending WMI_ROAM_SCAN_RSSI_THRESHOLD
/WMI_ROAM_FILTER_CMDID/WMI_ROAM_BTM_CONFIG_CMDID
/WMI_11K_OFFLOAD_REPORT_CMDID commands path.
If mawc roaming is not supported by firmware, don't send
WMI_ROAM_CONFIGURE_MAWC_CMDID command.
Add rssi reject AP list to the roam params process in function
csr_cm_roam_scan_filter().
Change-Id: I89e6dcac801e552877f7e918d1179dfa3466857a
CRs-Fixed: 2775101
3 ini:
roam_data_rssi_threshold_triggers
roam_data_rssi_threshold
rx_data_inactivity_time
If there's rx activity during latest rx_data_inactivity_time
and avg of data_rssi is better than roam_data_rssi_threshold, then
suppress roaming triggered by roam_data_rssi_threshold_triggers: low
RSSI or bg scan.
Change-Id: I5b41c4119e61392b50e52ab8ccb8650e5758f3b3
CRs-Fixed: 2768053
The logging macros implicitly takes care of embedding function name
in the log, hence there is no need to include __func__ again.
Getting rid of redundant __func__ reduces driver memory footprint.
Change-Id: Idf4685539991f65205f19b27551cef699230c82e
CRs-Fixed: 2768575
Add changes to send roam scan mode over RSO start/stop/update_cfg
from connection manager. Update the roaming params and roam scan
params to new structure.
Refine send_roam_scan_offload_mode_cmd_tlv().
Change-Id: I6adce2e8a24ece93a079032d0e66760393fcdccd
CRs-Fixed: 2766023
Add RSO logic to send roam trigger from target if along with
some optimization to move old logic in ROAM_OFFLOAD_V1.
Change-Id: I38e7fb4f8873328097df7e3a25d6c709f8d69b33
CRs-Fixed: 2765155
Add support to send WMI_RSSI_CHANGE_THRESHOLD command to firmware
in connection manager.
Change-Id: I97d4b8f8fc0e938ede0e61d44eb8ffbcbb0fb4ff
CRs-Fixed: 2761043
Add new code to implement below functions for connection manager
roam part:
And below two RSO command related process:
ROAM_SCAN_OFFLOAD_STOP
ROAM_SCAN_OFFLOAD_UPDATE_CFG
Change-Id: I378b969ddae77fff49ad1d4d8ce21764b292e5ac
CRs-Fixed: 2753011
WMI handler is registered for twt_session_stats event.
Upon wmi event twt session parameters are extracted and
cached in peer mc_cp_stats. UMAC APIs are provided to
retrieve TWT session parameters from north bound
interface(hdd) using twt peer's mac_addr/session dialog_id
CRs-Fixed: 2730732
Change-Id: I8ce38ac6be97e844e26e03751c6d6cca981b82b4
With the newly introduced BLM enhancement, APs may get enlisted
and sent to FW for (re)assoc restraint. However, the FW side
AP restraint is only required when LFR3 is enabled.
With LFR2, no FW side AP (re)assoc restraint is required and all
actions will be done within driver code.
Use LFR3 specific conditional macro to enclose all the code
needed for sending reject AP list to FW.
Change-Id: I9a8bc0e25bc4b319bf1841324ef1b711f0659093
CRs-Fixed: 2751791
Add connection manager changes to send roam scan offload init
deinit. Add new enum roam_offload_init_flags to fill the roam
init/deinit flags, 4-way handshake offload, bmiss skip full scan
flags at connection manager instead of getting the ini and filling
at target if.
Change-Id: I558e868efd341b508d3df76c8d6ab90eac512432
CRs-Fixed: 2745585
