User sets CFR data transport mode using vendor command
QCA_NL80211_VENDOR_SUBCMD_PEER_CFR_CAPTURE_CFG. By default
CFR data transport mode is relayfs, user uses vendor command
attr QCA_WLAN_VENDOR_ATTR_PEER_CFR_DATA_TRANSPORT_MODE to set
transport mode QCA_WLAN_VENDOR_CFR_DATA_RELAY_FS or
QCA_WLAN_VENDOR_CFR_DATA_NETLINK_EVENTS.
If user sets QCA_WLAN_VENDOR_ATTR_PEER_CFR_DATA_RECEIVER_PID
attr in QCA_NL80211_VENDOR_SUBCMD_PEER_CFR_CAPTURE_CFG vendor
command then hosts uses RECEIVER_PID to send unicast NL events
for CFR data.
Change-Id: I40e896fad8af24e761fcbedeba761f4a3815f0b8
CRs-Fixed: 2952095
Add a QCA vendor attribute to configure the driver to use Data or
Management frames for keep alive data. This attribute is used for
testing purpose.
Change-Id: I03b133f3d61c4d34b79e41ad72cfc24334380658
CRs-Fixed: 2960804
Add QCA vendor attribute to configure the driver to transmit the
Data frames with ER SU PPDU type format. This attribute is used
for testing purpose.
Change-Id: If11523ea3e6316c47181342c3acc8425da85ee1b
CRs-Fixed: 2960794
Add QCA interface to specify the RSSI thresholds separately for candidate
APs from different bands.
Change-Id: I51d2e7c4490fde3901a4e4e8ad31d9c18823637c
CRs-Fixed: 2951242
As a part of this change, in SAP TWT mode this mac_addr
attribute is required in response for TWT setup, get_status,
pause, response and teardown. And is required in request
for TWT get_status and teardown.
Change-Id: I230047ac46181a6bfca054c610b96c054f5c303d
CRs-Fixed: 2952331
Add QCA vendor interface for userspace to get information of usable
channels for different interface types from the driver/firmware.
Change-Id: Ice662b9f14e95f32f853637e73bccd686678f278
CRs-Fixed: 2939047
Define a new reason code in enum qca_wlan_vendor_hang_reason,
QCA_WLAN_TASKLET_CREDIT_LATENCY_DETECT, for tasklet/credit latency
detection.
Change-Id: I4852fc22f57d14d6eac30ddfd8361f2a63326981
CRs-Fixed: 2929164
The firmware rejects the TWT setup request when scan is in
progress. Extend enum qca_wlan_vendor_twt_status to represent new
reason code for it.
Change-Id: I8576d8cce2fac62d9e3cf020a3dadee06ec14d5c
CRs-Fixed: 2923272
Introduce a QCA vendor command to configure the concurrent connection
policies when multiple STA interfaces are (getting) active.
Change-Id: I574880e526e4aa8e179b417fbcba6d7e9e9fcfb1
CRs-Fixed: 2915545
Define the new TWT attributes for configuring the broadcast TWT
parameters in enum qca_wlan_vendor_attr_twt_setup.
Change-Id: Ia7b0e1565cef3bfe5d213b783390c7231a1a8446
CRs-Fixed: 2924690
The firmware sends new reason codes for roaming and
channel switch in progress. Update the enum
qca_wlan_vendor_twt_status to represent new reason code.
Change-Id: I4446ebf2e096873ab641029447f8fba9153216aa
CRs-Fixed: 2908446
Add a QCA vendor attribute to configure the driver to allow the
6GHz connection with all security types. This attribute is used for
testing purposes.
Change-Id: Icbd493a9a28bef77d8a31f12082a37a1bacdfd35
CRs-Fixed: 2900829
Add a QCA vendor attribute to ignore SAE H2E requirement mismatch
for 6GHz connection. This attribute is used for testing purposes.
Change-Id: I9d1a5680d3949da1a8009f4689d0c2859f15989f
CRs-Fixed: 2900813
The firmware sends new reason codes to indicate TWT teardown due to
single channel and multi channel concurrency. Update the enum
qca_wlan_vendor_twt_status to represent new reason code.
Change-Id: I49b35ca9570a4faf73f6c93eb957c357576efd1e
CRs-Fixed: 2904365
Add a QCA vendor attribute to enable/disable the Punctured Preamble Rx
support in HE PHY capabilities.
This attribute is used for testing purposes.
Change-Id: I5d0089ddc95beb334c73538431dde3a034a1bc21
CRs-Fixed: 2886737
Add a QCA vendor attribute to configure the driver to disable data
and management response frame transmission to test the BSS max
idle period feature.
This attribute is used for testing purposes.
Change-Id: I106da43f9044bd15727152e04a233376e79e034a
CRs-Fixed: 2886732
Add a QCA vendor attribute to configure the driver/firmware to
use only RU 242 tone for data frame transmission.
This attribute is used for testing purposes.
Change-Id: I32af9b34b335887279a41f64d7e93b14d6f44f41
CRs-Fixed: 2884735
Add a QCA vendor attribute to configure the driver with a specific BSS
max idle period value to advertise in (Re)Association Request frames.
This attribute is used for testing purposes.
Change-Id: Ibe98ab7947b759d9dcd3f963629de4dd6a86b543
CRs-Fixed: 2884705
QCA_NL80211_VENDOR_SUBCMD_GET_STA_INFO to get finer details on roaming
behavior, TSF out of sync count, and the latest TX rate, Rate Index used
for the transmission.
Change-Id: I34d112a263a587603f555069c0244f61dc44ec73
CRs-Fixed: 2876411
The response for the respective TWT operations can either be synchronous
or asynchronous (wherever specified). If synchronous, the response to
this operation is obtained in the corresponding vendor command reply to
the user space. For asynchronous case, the response is obtained as an
event with the same operation type.
Drivers shall support either of these modes but not both simultaneously.
The support for asynchronous mode is advertised through the new flag
QCA_WLAN_VENDOR_FEATURE_TWT_ASYNC_SUPPORT. If the driver does not
include this flag, it shall support synchronous mode.
Change-Id: I359e12c5147b0115158d03a7a08d74beca78455c
CRs-Fixed: 2842872
Define the following additional TWT operations:
QCA_WLAN_TWT_GET_STATS, QCA_WLAN_TWT_CLEAR_STATS,
QCA_WLAN_TWT_GET_CAPABILITIES, QCA_WLAN_TWT_SETUP_READY_NOTIFY.
Also define new attributes to qca_wlan_vendor_attr_twt_setup
and qca_wlan_vendor_attr_twt_nudge.
Change-Id: I687fd215c13aa12741d8ba7af23507f930d0ec81
CRs-Fixed: 2842072
TWT nudge is a combination of suspend and resume in a single request.
Add TWT nudge operation and QCA vendor attributes to support
the TWT nudge request.
Change-Id: Iddc4cb6722e88ad9dd65933091bdaa468718f2cf
CRs-fixed: 2822267
Define QCA vendor attributes to dynamically configure TX NSS and RX NSS
to be used with QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION and
QCA_NL80211_VENDOR_SUBCMD_GET_WIFI_CONFIGURATION commands.
Change-Id: I9b3b3d3c5be2abd01fa8669b10c2961c271ecdbb
CRs-Fixed: 2831257
Add feature capability indication for dbs for the
drivers to advertize support for this.
Change-Id: Ic6941e58a30d6aa6a867a12ddd7a8db5abbb1673
CRs-Fixed: 2821654
Add feature capability indication for Adaptive 11r for the
drivers to advertize support for this.
Change-Id: I28da5c3d7d4d841de980c841b1d4c39be12ed295
CRs-Fixed: 2817358
Define a QCA vendor attribute
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_FULL_BW_UL_MU_MIMO to
enable/disable full bandwidth UL MU-MIMO subfield in the HE PHY
capabilities information field for testing purposes.
Change-Id: I666abb2654603069140bd603ae0377ea01a720fa
CRs-Fixed: 2816951
The connection process fails for several reasons and the status codes
defined in IEEE802.11 specification doesn't cover the locally generated
reason codes. Add an attribute to QCA_NL80211_VENDOR_SUBCMD_GET_STA_INFO
vendor sub command which can be used by driver/firmware to report various
additional reason codes for connection failures.
Change-Id: Ibab4696fba34f7a18fb8b5f8601e90c5dfcba89e
CRs-Fixed: 2799153
Currently host does not convert all internal auth types
to qca auth types which results in invalid auth type
indication for big data logging even for some of the
valid auth types.
For example in current scenario connection hapens in SAE
auth type but driver indicates invalid AKM type.
To address above issue add missing auth type and send
proper auth type to user space as part of the big data
logging.
Change-Id: I2612a081385c2bc888afb032cf6fd2a44d886e40
CRs-Fixed: 2803348
Add new QCA vendor attributes to get thermal level from driver.
Driver will return thermal level upon userspace requests or sent
thermal event when firmware indicates theraml level changes.
Change-Id: I86b3ac34466d57cbd713cf72a7eb883677883a21
CRs-Fixed: 2786642
Wake lock stats vendor command attribute names in
the driver are different from the attribute names
in upstream qca-vendor.h.
Change the wake lock stats attributes name in driver.
Change-Id: I761aa07dacd6a7424759ae1e501053428275b113
CRs-Fixed: 2789538
Define QCA vendor attribute in SET(GET)_WIFI_CONFIGURATION to
dynamically configure ANI level.
Change-Id: I422c6301f2e4c207b58a2d85199dd4a47f031236
CRs-Fixed: 2781047
Introduce QCA_ATTR_ROAM_CONTROL_SCAN_SCHEME_TRIGGERS
that represents the triggers for which the scan scheme from
enum qca_roam_scan_scheme has to be applied.
Change-Id: I9d620a0ada16093042befaf8ae2e80437369c256
CRs-Fixed: 2785260
The firmware sends a new status code to indicate an already suspended
TWT session. Update the status code enum to represent this state.
CRs-Fixed: 2784214
Change-Id: I7663ae1e1477919b7e93b0dcebd5287dc3e87263
Introduce a vendor command for medium assessment through
QCA_NL80211_VENDOR_SUBCMD_MEDIUM_ASSESS.
Change-Id: Iacce974c862a9899de853be70858a47ae719b541
CRs-Fixed: 2766103
Add a QCA vendor subcommand QCA_NL80211_VENDOR_SUBCMD_UPDATE_SSID
to update the new SSID in hostapd. NL80211_ATTR_SSID is used to
encapsulate the new SSID.
Change-Id: I0c6e00afefa8cf00ceb58b4cdf72958f2ece8307
CRs-fixed: 2774888
Add new QCA vendor attributes to configure RSNXE Used (FTE), ignore CSA,
ignore SA Query timeout and OCI frequency override with QCA vendor command
QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION for STA testbed role.
Change-Id: I8f46361023444661bd522c8731b4edd864c8cff6
CRs-Fixed: 2759772
Add support to get number of MIC errors, missing MME incidents, and
packet replay incidents observed while using IGTK/BIGTK keys when PMF
and/or beacon protection features are enabled.
These counters applicable only for STA mode and user gets those
through the QCA_NL80211_VENDOR_SUBCMD_GET_STA_INFO vendor command.
Change-Id: Ifae1fd43f41f280a5b677b89aa90bbb51bb96930
CRs-Fixed: 2757861
This change adds QCA_NL80211_VENDOR_SUBCMD_MBSSID_TX_VDEV_STATUS,
and enum for qca_wlan_vendor_attr_mbssid_tx_vdev_status
Change-Id: I4c3f070b29c25f095afdfd587e3f35cb160aefc7
CRs-Fixed: 2759232
Add gpio configuration vendor interface to set target
gpio configuration and output info, meanwhile add
GPIO component id
Change-Id: I0b551cd63b61675406fe37549f2efeca1a2999bf
This commit introduces additional stats to query through
QCA_NL80211_VENDOR_SUBCMD_UPDATE_STA_INFO.
Change-Id: Ibc713d1da81a5bf8fa267a205680aec5539630ce
CRs-Fixed: 2758484
Add support to configure the number of chains over the nl
vendor command
QCA_WLAN_VENDOR_ATTR_CONFIG_NUM_TX_CHAINS
QCA_WLAN_VENDOR_ATTR_CONFIG_NUM_RX_CHAINS.
Change-Id: I81eeda348efe36e03620687e81c082d3869fcd35
CRs-Fixed: 2756676
Add new vendor command QCA_NL80211_VENDOR_SUBCMD_WIFI_FW_STATS
which is used for wifistats. Also remove
QCA_NL80211_VENDOR_SUBCMD_HTT_STATS which is wrongly used
in place of QCA_NL80211_VENDOR_SUBCMD_PEER_FLUSH_PENDING
Change-Id: Ia73a09419c22c1206f8f933b9cf4b7f22b0399fd
Add support for vendor attributes to update channel tx_time
and rx_time to the user space.
Change-Id: Ifdb50d8f7bcdcf8a560d174cd34efcb1991768a9
CRs-Fixed: 2757211
