User sets CFR data transport mode using vendor command
QCA_NL80211_VENDOR_SUBCMD_PEER_CFR_CAPTURE_CFG. By default
CFR data transport mode is relayfs, user uses vendor command
attr QCA_WLAN_VENDOR_ATTR_PEER_CFR_DATA_TRANSPORT_MODE to set
transport mode QCA_WLAN_VENDOR_CFR_DATA_RELAY_FS or
QCA_WLAN_VENDOR_CFR_DATA_NETLINK_EVENTS.
If user sets QCA_WLAN_VENDOR_ATTR_PEER_CFR_DATA_RECEIVER_PID
attr in QCA_NL80211_VENDOR_SUBCMD_PEER_CFR_CAPTURE_CFG vendor
command then hosts uses RECEIVER_PID to send unicast NL events
for CFR data.
Change-Id: I40e896fad8af24e761fcbedeba761f4a3815f0b8
CRs-Fixed: 2952095
Add a QCA vendor attribute to configure the driver to use Data or
Management frames for keep alive data. This attribute is used for
testing purpose.
Change-Id: I03b133f3d61c4d34b79e41ad72cfc24334380658
CRs-Fixed: 2960804
Add QCA vendor attribute to configure the driver to transmit the
Data frames with ER SU PPDU type format. This attribute is used
for testing purpose.
Change-Id: If11523ea3e6316c47181342c3acc8425da85ee1b
CRs-Fixed: 2960794
Add QCA interface to specify the RSSI thresholds separately for candidate
APs from different bands.
Change-Id: I51d2e7c4490fde3901a4e4e8ad31d9c18823637c
CRs-Fixed: 2951242
As a part of this change, in SAP TWT mode this mac_addr
attribute is required in response for TWT setup, get_status,
pause, response and teardown. And is required in request
for TWT get_status and teardown.
Change-Id: I230047ac46181a6bfca054c610b96c054f5c303d
CRs-Fixed: 2952331
Add QCA vendor interface for userspace to get information of usable
channels for different interface types from the driver/firmware.
Change-Id: Ice662b9f14e95f32f853637e73bccd686678f278
CRs-Fixed: 2939047
In the assignment of varaible expected_field_info_size with an expression,
there might be an issue of integer overflow.
To fix this issue add a check for the expression with UINT_MAX
before assigning the expression to variable expected_field_info_size.
Change-Id: Iaa58fc164655d5b074eef55f8fd78f83a71e3fdf
CRs-Fixed: 2825846
Define a new reason code in enum qca_wlan_vendor_hang_reason,
QCA_WLAN_TASKLET_CREDIT_LATENCY_DETECT, for tasklet/credit latency
detection.
Change-Id: I4852fc22f57d14d6eac30ddfd8361f2a63326981
CRs-Fixed: 2929164
The firmware rejects the TWT setup request when scan is in
progress. Extend enum qca_wlan_vendor_twt_status to represent new
reason code for it.
Change-Id: I8576d8cce2fac62d9e3cf020a3dadee06ec14d5c
CRs-Fixed: 2923272
Introduce a QCA vendor command to configure the concurrent connection
policies when multiple STA interfaces are (getting) active.
Change-Id: I574880e526e4aa8e179b417fbcba6d7e9e9fcfb1
CRs-Fixed: 2915545
Define the new TWT attributes for configuring the broadcast TWT
parameters in enum qca_wlan_vendor_attr_twt_setup.
Change-Id: Ia7b0e1565cef3bfe5d213b783390c7231a1a8446
CRs-Fixed: 2924690
The firmware sends new reason codes for roaming and
channel switch in progress. Update the enum
qca_wlan_vendor_twt_status to represent new reason code.
Change-Id: I4446ebf2e096873ab641029447f8fba9153216aa
CRs-Fixed: 2908446
Linux kernel commit 15bfc2348d54 ("modpost: check for static
EXPORT_SYMBOL* functions") adds a check to make sure that static
functions are not exported.
With this in place the following fatal errors are reported:
FATAL: modpost: "__qdf_nbuf_get_ether_type" is a static EXPORT_SYMBOL
FATAL: modpost: "os_if_spectral_free_skb" is a static EXPORT_SYMBOL
FATAL: modpost: "qdf_nbuf_tx_desc_count_update" is a static EXPORT_SYMBOL
FATAL: modpost: "__qdf_nbuf_get_ip_offset" is a static EXPORT_SYMBOL
To fix these errors do not export the static functions.
Change-Id: Ib5caab904401900bafb23dee23b119daa76d4055
CRs-Fixed: 2910980
Add a QCA vendor attribute to configure the driver to allow the
6GHz connection with all security types. This attribute is used for
testing purposes.
Change-Id: Icbd493a9a28bef77d8a31f12082a37a1bacdfd35
CRs-Fixed: 2900829
Add a QCA vendor attribute to ignore SAE H2E requirement mismatch
for 6GHz connection. This attribute is used for testing purposes.
Change-Id: I9d1a5680d3949da1a8009f4689d0c2859f15989f
CRs-Fixed: 2900813
The firmware sends new reason codes to indicate TWT teardown due to
single channel and multi channel concurrency. Update the enum
qca_wlan_vendor_twt_status to represent new reason code.
Change-Id: I49b35ca9570a4faf73f6c93eb957c357576efd1e
CRs-Fixed: 2904365
Structure wlan_cm_roam_resp and wlan_cm_connect_resp are identical
structures and in current code these structures are used for connect
and reassoc functionalities with different functions as these are
identical structures and only one structure can be used to reduce
the duplication of the code.
To address this code duplication issue replace wlan_cm_roam_resp
structure with wlan_cm_connect_resp.
Change-Id: I90949c25f46acd2fa78cebb70c9a04f0718b90c4
CRs-Fixed: 2875232
Set value for locally_generated flag for disconnect response based on
disconnect req source
Change-Id: I4f693be98ca10a5f883f1a9349ed50876679e723
CRs-Fixed: 2880520
Add a QCA vendor attribute to enable/disable the Punctured Preamble Rx
support in HE PHY capabilities.
This attribute is used for testing purposes.
Change-Id: I5d0089ddc95beb334c73538431dde3a034a1bc21
CRs-Fixed: 2886737
Add a QCA vendor attribute to configure the driver to disable data
and management response frame transmission to test the BSS max
idle period feature.
This attribute is used for testing purposes.
Change-Id: I106da43f9044bd15727152e04a233376e79e034a
CRs-Fixed: 2886732
Add a QCA vendor attribute to configure the driver/firmware to
use only RU 242 tone for data frame transmission.
This attribute is used for testing purposes.
Change-Id: I32af9b34b335887279a41f64d7e93b14d6f44f41
CRs-Fixed: 2884735
Add a QCA vendor attribute to configure the driver with a specific BSS
max idle period value to advertise in (Re)Association Request frames.
This attribute is used for testing purposes.
Change-Id: Ibe98ab7947b759d9dcd3f963629de4dd6a86b543
CRs-Fixed: 2884705
In cm_allocate_and_copy_ies_and_keys instead of target's pointer
source's pointers are reset thus making the following code void
Fix this by resetting the target pointers which needs to be allocated
with new memory.
Change-Id: I4417492c43eb27833d365ec4aa644e07ed4eca51
CRs-fixed: 2884187
QCA_NL80211_VENDOR_SUBCMD_GET_STA_INFO to get finer details on roaming
behavior, TSF out of sync count, and the latest TX rate, Rate Index used
for the transmission.
Change-Id: I34d112a263a587603f555069c0244f61dc44ec73
CRs-Fixed: 2876411
Currently there is no mechanism in driver to decide whether
to consider the user configured number of sched scan plan or
to configure only 1 schad scan plan.
There is a requirement to configure only one sched scan plan,
add ini support to meet this requiremet.
Change-Id: Iea3bc3f18696837150ce6f4bd60416a8a45bd1d3
CRs-Fixed: 2868125
Currently driver rejects connect request if assoc ie length
is 0 or assoc ie is NULL which results in connect failure.
To avoid above issue do not reject connect request if
assoc ie is NULL. Also fix the connect status to send the
proper status code instead of WLAN_STATUS_UNSPECIFIED_FAILURE.
Change-Id: Icb775a88780350fa589ae8db65abdd79980558c6
CRs-Fixed: 2869967
Host updates proper FILS param set i.e. username, auth_type and
is_fils_connection in the FILS response.
Change-Id: I0c30325bc7d620aa286aae0dd299dec9b26219ff
CRs-Fixed: 2865060
In connection success case the unlink BSS is not required, so
add the status check.
Change-Id: If5e2d02b37865267a096f01f0835bdccbc8e1c3d
CRs-Fixed: 2860102
Define VENDOR_NLA_POLICY_IPVXXX_ADDR for IPV4/IPV6 to address kernel
version dependency.
Change-Id: If73fe24dc29a65c043af6cf3d797a756a264f602
CRs-Fixed: 2851486
Host add support to save gtk and set hlp data from fils ie of connect
response.
Change-Id: I5e6b9882359697f09a0935a9c07f3427dbe04cc2
CRs-Fixed: 2849123
Use safe API - wlan_objmgr_iterate_obj_list to enumerate
vdev. It will check vdev in "create" state by
wlan_objmgr_vdev_try_get_ref.
Change-Id: I650801c07846e22f1863925ed4316c0a24bd9cae
CRs-Fixed: 2849177
The response for the respective TWT operations can either be synchronous
or asynchronous (wherever specified). If synchronous, the response to
this operation is obtained in the corresponding vendor command reply to
the user space. For asynchronous case, the response is obtained as an
event with the same operation type.
Drivers shall support either of these modes but not both simultaneously.
The support for asynchronous mode is advertised through the new flag
QCA_WLAN_VENDOR_FEATURE_TWT_ASYNC_SUPPORT. If the driver does not
include this flag, it shall support synchronous mode.
Change-Id: I359e12c5147b0115158d03a7a08d74beca78455c
CRs-Fixed: 2842872
Define the following additional TWT operations:
QCA_WLAN_TWT_GET_STATS, QCA_WLAN_TWT_CLEAR_STATS,
QCA_WLAN_TWT_GET_CAPABILITIES, QCA_WLAN_TWT_SETUP_READY_NOTIFY.
Also define new attributes to qca_wlan_vendor_attr_twt_setup
and qca_wlan_vendor_attr_twt_nudge.
Change-Id: I687fd215c13aa12741d8ba7af23507f930d0ec81
CRs-Fixed: 2842072
