delete QCA_TEST_MON_PF_TAGS_STATS to enable stats by default
and just use flag to enable debug nbuf_head dump
Change-Id: I0b0bb627f4d597d28181a11c38fa18b191210da4
CRs-Fixed: 3278411
1. Add stats to indicate REO ring size and Rx desc pool size
2. Add low threshold interrupt stats
3. Update SW2RxDMA ring size max to 16K
Change-Id: If84b88bc08e447774ab445df36b9f2f2219356b8
CRs-Fixed: 3286940
add debug prints and a custom timer for how long to wait to receive next
bk pressure event message.
Change-Id: I5a736b0f134cd179990de536da02967db3e39774
CRs-Fixed: 3273427
Add framework to use different RX hash values and ring masks
for ML and non-ML peers
Change-Id: I098cb50b8873eb137ce096011d01a5c21aaf854f
CRs-Fixed: 3269916
Currently the max number of rx descriptors, via INI,
is 4096, which is not sufficient if the number of
entries in rx buffer refill ring is increased.
Hence the set the max allowed number of rx descriptors
to 16K, which is also the max allowed entries in the
rx buffers refill ring.
Change-Id: I287a3f47525179ebf8de65e2f8310a961881916b
CRs-Fixed: 3224590
Enable bits in WMI_INIT command to let the FW know about host's
capability to support notify frame feature. If the feature is enabled,
host can mark certain TX frames as "notify frames" for hardware and they
need not be sent to FW. FW depends on this capability exchange to decide
whether to install HW rules for frames to be sent to HW.
Change-Id: I7158e79ae0fbdc73a2f4096ae1577337e8291246
CRs-Fixed: 3209399
NAPI scale factor should be configured based on the board
type. for example Hawkeye could have a different scale factor
compared to Alder.
CRs-Fixed: 3212330
Change-Id: Ie0bad6aade9ca9379997aa974154f9fb903ab93e
Add ini support to configure TC ingress filter priority
value which would be used for TC based dynamic GRO.
Change-Id: I1742f4539353939e3a40ff4096b3f833f2029b12
CRs-Fixed: 3206817
Change tx monitor ring sizes and make minor fix when getting the
number of entries.
Change-Id: Iec458d88948556f7007d4fa33bf082c8ee089064
CRs-Fixed: 3206170
Increase max value of Rx refill ring size that
can be configured via ini to 8192
Change-Id: I5180996181e43d26221e0106488eda86cf711e1c
CRs-Fixed: 3198408
Currently, data stall detection is without control over
individual data stall events.
INI variable, gEnableDataStallDetection is converted from
boolean to unsigned int which provides control over events
across FW and host with each bit corresponding to different
data stall events.
Bit 0: Enable all data stall events if set.
Bit 1-30: mapped to data stall events. Used when Bit 0 is 0
Bit 31: Enable aggressive timeout for WLM Mode.
Change-Id: I4656520accd1589e77d5054eaa0a3cb8e63b14b2
CRs-Fixed: 3174906
Add support to change the tx_desc value to 65536. Some changes
to make the function argument as u32 type us made
Change-Id: I7cbde1b7ed4ab4e278c25c1ecfa94b7f673197f2
CRs-Fixed: 3130833
Make 1:1 dependency on num REOs and rx_thread. Keep num rx_thread
dependent on rx REO rings, 1 rx_thread for each rx REO ring.
Controlled via INI dp_reo_rings_map.
Change-Id: I7c199226cfa3f173ea328d71075816b8eb9ba91f
CRs-Fixed: 3048260
Enable the 4th Tx. completion ring to save CPU load
Initialization and interrupt handling for 4th completion ring
is done here.
Change-Id: I2db27218a3c3e14d719d012f03454a6a7aa647fe
User can specify a limit and frames are dropped when the memory
used by packets in the queues goes beyond the limit. This is a
SoC level param.
Change-Id: Id2bd9caaa11d9ea9f9e04c635ff629190bb62916
- Fixes for compilation issues after enabling
monitor 2.0 support.
- change copyright year for all files in the chain.
Change-Id: I885e257bd8ca83850656d8a1f408c1bc34920d7a
CRs-Fixed: 3086483
Add configuration at SOC level for hw vdev stats in BE architecture.
Following config parameters are added:
vdev_stats_hw_offload: option to enable/disable hw vdev stats
hw_vdev_stats_timer: timer duration for hw vdev stats
Change-Id: I8cbd2b6a7378d8a9e7de920a3a6fdff0cf7785fe
CRs-Fixed: 3067843
Rx patch changes for multichip MLO
1. Create ini for rx ring mask for each chip
2. Configure hash based routing for each chip based
on lmac_peer_id_msb
3. Peer setup changes to configure lmac_peer_id_msb
to enable hash based routing
4. Rx Replenish changes to provide buffers back to owner
SOC of reo ring
Change-Id: Ibbe6e81f9e62d88d9bb289a082dd14b4362252c4
This force use BA64 ini config is no longer needed, because another
gRxAggregationSize can do the same settings and more flexible.
Change is used to remove this config.
Change-Id: Ie780489849f8b701481a628a9bca2b4112460bd8
CRs-Fixed: 3076982
Dynamic GRO feature is enabled by default and aimed for specific
customers. Add an ini control to allow other customers to config
this feature enable/disable.
Change-Id: I7f505599327ac131b3cdac9b4d9e038861b1aeb6
CRs-Fixed: 3074689
For IPQ products, there is 1 refill ring which is of hardware type
and host replenishes the buffers onto this ring so that hardware can
use these buffers for Rx.
In IPA offload mode, the buffer replenishment model is different from
the one mentioned above. There are 3 refill rings, out of which,
2 are software refill rings (1 for host and 1 for IPA), and last ring
is hardware ring given to FW.
Ring given to IPA is to refill the buffers after processing the
regular Rx packets and ring given to host is to refill the buffers
after processing of exception packets. Since there are 2 entities to
refill the buffers, the hardware ring given to FW multiplexes these 2
software rings and provides the buffers to hardware.
Make changes to follow above replenishment model for SDX+Pine
integration.
Change-Id: I0d9e4ec811a3023a258e0a6b9ee22ccdffcebafa
CRs-Fixed: 3049633
INI config to set the number of tx rings to 1
or 2 does not take effect since the value of
WLAN_CFG_NUM_TCL_DATA_RINGS_MIN is 3.
Fix is to set WLAN_CFG_NUM_TCL_DATA_RINGS_MIN to 1
to allow for a lower number of tx rings cfg.
Change-Id: Idc7881f75d42fabda5d3ed55e74c9eb784f7705f
CRs-Fixed: 3070272
Add support configure ipa tx ring and tx completion ring for
2.4G and/or 5G separately.
Change-Id: Iafb8fa589ff0cce15609a3dfa2209364291d7cef
CRs-Fixed: 2996604
Set default value 7 for INI dp_reo_rings_map, this is just
one WAR to not block HMT before reo_ring_remap and dp thread
issue is fixed.
Change-Id: Ib2c8ebab936951798112759e1ac0baba85996036
CRs-Fixed: 3005555
Currently IPA tx buffers are fixed at 1007 buffers.
Adding INI support to change number of TX buffers at load time.
Change-Id: Ide0357554f34759198276b9699e0e6f4a3e20051
CRs-Fixed: 2957916
Beryllium targets have more number of HW rings.
Add INI changes to allow increase in number of rings.
Change-Id: I73d779334601d3a1c2aefcade1dcf9dd0f2ef761
CRs-Fixed: 2891021
