Add device Id and target type checks for qcn6432 target
compilation
Add CFR and spectral support for QCN6432
Change-Id: Ic908fa768aa1be7cfc40be7fcc7f9ca6aa85aaa6
CRs-Fixed: 3351747
The kernel-doc script identified documentation issues in the
target_if/spectral folder, so fix them.
Change-Id: I0bb7d3632fd602450713d8521861d246ea5f33df
CRs-Fixed: 3417470
Extract the blanking status from Spectral reports and upload
it to user space via SAMP message.
CRs-Fixed: 3413925
Change-Id: Ib033b88190be6bca3dff903cf279a9883821fb10
There is a possibility of Spectral being stopped by user
while a report is being processed, this can lead to the data
structures becoming invalid leading to an error.
Guard API target_if_consume_spectral_report_gen3 with
spectral_lock to avoid this, and allow Spectral scan to stop
only when the ongoing report has been processed.
Change-Id: I617f66e3c5b45323f8c88e9e5e173b139a8a9241
CRs-Fixed: 3376179
Initialize Spectral Scan detector ID to Spectral mode table for
QCA5332. Detector ID 1 and 2 are not supported for QCA5332.
CRs-Fixed: 3366784
Change-Id: I7fe9b53819c649455a67957827e4f900e39257e0
Add input_punc_bitmap to struct ch_params.
Add input puncture bitmap to regualtory channel search APIs.
The non-SP channels will be punctured by ACS module so that AP
can come up in highest possible BW in Standard Power mode
with the given primary frequency. These punctured channels are not
validated (whether supported in the given power mode of operation) by
the regulatory.
CRs-Fixed: 3278013
Change-Id: I56b0495be902fd92fc6da26e1007d60f930ba687
1.This change fixes the use of uninitialized
variable in host driver.
2.Adds NULL check for num_psocs in mlo_peer_calculate_avg_rssi to
avoid undefined behaviour.
Change-Id: Ifbfef42b5930dfe15736a75a74e81155c5f1fbce
CRs-Fixed: 3297794
In the case of finite Spectral scan, the spectral scan will be stopped in
the target once the requested count of spectral reports got generated.
The Host will not be notified of this stop scan. To synchronize the Host
data structures in accordance with the target, we explicitly stop the scan
once the last report is received. In the current implementation, the
stop_scan() is called at the beginning of the last report processing and
we continue processing the last report. As part of the last report
processing, we could access the data structures that were reset during
the stop_scan(). To fix this, stop the spectral scan at the end of the
last report processing.
Change-Id: Iecfa4e72ccbedae77ee2a57e9283910e980121d5
CRs-Fixed: 3287136
Remove unused local variables in the Spectral module to
address the compiler warnings.
CRs-Fixed: 3272706
Change-Id: I91c806a9bd6413eb559992a0b184d8bd9c4ea4d0
WMI_SPECTRAL_CAPABILITIES_EVENTID registration returns QDF_STATUS_E_FAILURE
on failure which is not required as it is causing crash on failure where
event registration is failing i.e., Hawkeye + Swift
Change-Id: Id11d76941b12d0ee249d8f6e86612b351b732d78
CRs-Fixed: 3255827
Currently, we are hardcoding the detector ID to mode table for different
chipsets. Starting QCN9224, the target sends information regarding the
detectors participating in that Spectral session in the FW_PARAMS event.
Use that to update the Detector ID to mode table.
Change-Id: Ic09358e0c3b9ac0166b39f5ce445a83697146d4a
CRs-Fixed: 3253076
Currently, the Spectral detector list building logic assumes that only
5 GHz or 6 GHz participates in SBS modes. With Split-PHY mode in QCN9224,
even a 2.4 GHz radio can participate in SBS mode.
So, consider this case as well while building the detector list.
Change-Id: I99c841584c52785e94c8ee1b0d59494cbdd37f42
CRs-Fixed: 3252986
WMI_SPECTRAL_CAPABILITIES_EVENTID event will be sent by the target SW to
indicate the different capabilities of the Spectral HW.
Add support to process this event and extract the capabilities.
Change-Id: I03b3236b6def98d24e77b2a9ea51ee866e62e6fe
CRs-Fixed: 3238450
chan_params structure is uninitialized, due to which variables
inside the chan_params structure have garbage values.
To avoid this, initialize the chan_params structure.
Change-Id: Ic09c0a2d24c2a1eac8f076c7bbd4d25d147370fd
CRs-Fixed: 3205502
packmode_fftbin_size_adj is used when the reported FFT bin length from
HW is twice the actual size. This issue is fixed in HW from Pine onwards.
So, don't use this WAR on QCA9574.
Change-Id: I43a4bcb6f238fac6a14c1f6459d7ad24a7a99b2d
CRs-Fixed: 3165085
Puncture is one of 11be feature. Even 11be compile macro is defined,
Dut can start AP with non-11be mode. Regulatory component has no idea
whether it should consider puncture or not. Puncture should be a
configurable parameter from caller.
When updating channel state, puncture should be considered for 11BE
AP. is_create_punc_bitmap should be set in struct ch_params and pass
it to reg_get_5g_bonded_channel_state_for_pwrmode.
Change-Id: I96fb131f2df201a827ab7d98ca099a38b008e0d3
CRs-Fixed: 3160259
Add the following stats.
- Number of Spectral events received from the target
- Number of consume_spectral_report() invocations
- Number of fill_samp_msg() invocations
- Number of SAMP messages that are ready to be sent to the user-space
- Number of SAMP messages queued to the user-space
Change-Id: I53fda4b309620043a77bc2bc87573941d7fb0bcb
CRs-Fixed: 3156151
Add support to receive the fft_recapture arg value
from spectraltool, handle the FFT recapture config and
pass this to FW. The recapture feature must be
enabled only for spectral scan period > 52 us and
Normal Spectral scans.
Change-Id: Ied637704d25bb15bff2139a215da7481d4f80e4f
CRs-Fixed: 3140890
Add support to handle the FFT recapture config and
pass this to FW. The recapture feature must be
enabled only for spectral scan period > 52 us and
Normal Spectral scan.
Change-Id: I6b92fcd674ae95bcd0a23892ef9ccc6ba487d6ad
CRs-Fixed: 3140890
Use CONFIG_REG_ 6G_PWR_MODE for the new API.
Use "_for_pwrmode" as suffix for the new functions.
Change-Id: I9b84944a59062277b76bc48877c47ea5afada0ec
CRs-Fixed: 3133023
The consumers of the current channel list may want to search through 6G
channels that are not part of current channel list and belong to channel
list of different power mode.
Therefore, replace the regulatory current channel list with that of 6G
power based channel list.
Change-Id: Ie2ff8bbfb50a5f95f584b134b18246cb28b1c406
CRs-Fixed: 3110987
While copying FFT bins from the target, Spectral Host driver reads
one DWORD (32-bits) at a time and extracts FFT bins out of those DWORDs.
This extraction uses standard bit shift and mask operations as below.
#define QDF_GET_BITS(_val, _index, _num_bits) \
(((_val) >> (_index)) & ((1 << (_num_bits)) - 1))
For a chipset that uses pack mode 0 i.e., packs 1 FFT bin per DWORD,
_num_bits in the above operation will be 32. So, we try to left shift the
integer constant '1' by 32. If the integer constant is represented by
32-bit integer, we could have issues in the result of shift operation.
As per C standard, the result of shifting an operand by a count greater
than or equal to width (in bits) of the operand is undefined.
This is because some platforms could optimize the shift operation by
masking the shift count to 5 bits. That means, the shift actually
performed is 32 & 31, which is 0.
Fix this by using 64-bit integer constant '1' in the above operation.
Change-Id: Ic7fe4de7917f3069d78a2ff29d86009cbf381e3f
CRs-Fixed: 3125158
Currently, qdf_spin_lock/qdf_spin_unlock is used to protect
spectral_lock. This can lead to a deadlock when the process
context is holding the lock and gets pre-empted by the tasklet.
To avoid this use qdf_spin_lock_bh/qdf_spin_unlock_bh.
Change-Id: Ibd2be7b7f3faf2dea9d7df8d6468c7a8fda512f2
CRs-Fixed: 3124199
For reports modes 0 and 1, the number of FFT bins in a detector will be 0.
We calculate end_bin_idx as start_bin_idx + num_bins - 1.
When start_bin_idx is 0 for these report modes, end_bin_idx will be -1.
Since bin indices are unsigned integers, end_bin_idx becomes a very big
value and we will try to copy unintended large number of bytes.
Fix this by forcing end_bin_idx to start_bin_idx when num_bins is 0.
Change-Id: I11e5dd673fc95a1ce3823ef977fd70c34a4ec67e
CRs-Fixed: 3096955
For per-session detector map, maintain a different
det_map_valid flag for Normal and Agile spectral scan
mode.
Change-Id: I5a2a0253624a393feba966641d518e59a48f4a8a
WMI_SPECTRAL_CAPABILITIES_EVENTID event will be sent by the FW to
indicate different capabilities of the Spectral HW.
Add support to extract the FFT size capabilities from this event.
Change-Id: I9640fa51e4249b9d1c2d9d3ac5da7f1d56c9d006
CRs-Fixed: 3098880
WMI_SPECTRAL_CAPABILITIES_EVENTID event will be sent by the FW to
indicate different capabilities of the Spectral HW.
Add support to extract the sscan bandwidth capabilities from this event.
Change-Id: I6ff6e5a8d80271fa62a430c986f53a321d46c66b
CRs-Fixed: 3098832
WMI_SPECTRAL_CAPABILITIES_EVENTID event will be sent by the FW to
indicated the different capabilities of the Spectral HW block.
Add support to extract the fixed parameters from this event.
Change-Id: Ib13108f078de008b6a76a25a010e85a7fdb6f5fe
CRs-Fixed: 3098203
Each FFT bin value is represented as an 8 bit integer
in SAMP message. But depending on the configuration,
the FFT bin value reported by HW might exceed 8 bits.
Clamp the FFT bin value between the min and max value
which can be represented by 8 bits. For linear mode,
min and max FFT bin value which can be represented by
8 bit is 0 and U8_MAX respectively. For dBm mode, min
and max FFT bin value which can be represented by 8 bit
is S8_MIN and S8_MAX respectively.
CRs-Fixed: 3056458
Change-Id: I9ec75f781a130d3ed0d0d9393975fd5874961ce0
It calls spectral_process_phyerr of spectral operations without any
check. Which cause null point dereference potentially. So, check this
pointer before calling.
Change-Id: Iae246f847dd41e62b628223652a9527a65b43799
CRs-Fixed: 3055246
Populate and expose the following 320MHz spectral capabilities.
- Agile spectral scan support for 320MHz mode.
- Number of detectors used for spectral scan in 320MHz mode.
Change-Id: Ibea77d4ec8b1d9322ef82d1d48236836ffad24ec
CRs-Fixed: 3053059
Pass report parameters to FFT bin byte swap function instead of
FFT bin length adjustment WAR.
Change-Id: I02a280bc4e8e0839c894a70258e1f16a784c08a6
CRs-Fixed: 3051559
FW sends Spectral scan detector info TLV in WMI_PDEV_SSCAN_FW_PARAM
event to indicate the information of a detector participating in a sscan
session. FW sends one TLV of this type for each detector participating
in a spectral scan session. Add support to process the TLV and update
the spectral host data structures accordingly.
CRs-Fixed: 3044193
Change-Id: Ie17b6ea9336ada7a00e4594fa2f7f49ef3d443e5
FW sends Spectral scan chan info TLV in WMI_PDEV_SSCAN_FW_PARAM_EVENTID
event to indicate the channel information for a spectral scan session.
Add support to process the TLV and update the spectral host data structures
accordingly.
CRs-Fixed: 3044162
Change-Id: Ibbf7f6bbbb267123bbdf44bcfffa2cfb1c2926df
On Beryllium architecture, PHY DMA applies a 32-bit byte swap to assist
in efficient Host reads when connected to a big-endian Host.
This is done to avoid byte swapping at the Host.
So, if the Host reads this data 32-bit word at a time, the byte order
would be intact. Report headers are not a problem because as they are
composed of 32-bit words. For FFT bins, read each DWORD at a time and
extract FFT bins out of that DWORD. Make this change in a generic way to
keep the design uniform across different chipsets and endian modes.
CRs-Fixed: 3042188
Change-Id: Idff1ac7eb5e18c692c9ee8b19b9ae9e6b962d486
Add Spectral APIs to convert channel width values
from enum phy_ch_width to nl80211_chan_width and
vice-versa.
CRs-Fixed: 3029184
Change-Id: I60fb7fb04b943b0d70c569ff6587e5e8efd7722b
Populate the list of supported spectral scan bandwidths for different
targets and use that in populating the detector list.
CRs-Fixed: 3042448
Change-Id: I5dac2c845843698bbafac64a01517acfbe120180
Initialize the variable "segid" to prevent the usage of junk value.
Dont dereference the spectral-lmac object if the same is NULL.
Change-Id: I5206a99017f77e5c94368d91171a7eb05745933c
Beryllium chipsets support FFT sizes as follows for different sscan widths.
20MHz:- Min FFT size: 5, Max FFT size: 9
40MHz:- Min FFT size: 5, Max FFT size: 10
> 40MHz:- Min FFT size: 5, Max FFT size: 11
Populate these FFT sizes for Beryllium targets.
CRs-Fixed: 3042443
Change-Id: Id7052e3513b29789e96c351aa4cdede499ef2578
