Host checks if firmware advertises Operating channel validation(OCV)
support bit in service ready then updates OCV flag in wiphy ext feature.
Change-Id: I92f872a07e6f7142e602e6a9e5f5edcecc0aab0b
CRs-Fixed: 2880821
Add a NULL check before calling rps_enable callback
from ipa_set_rps_per_vdev and also add a check to avoid
disabling rps twice.
Change-Id: Ib63b2cda99aa332905df640ffa2d401c22845ad2
CRs-Fixed: 2876490
Currently driver fills unicast, multicast & auth mode values from
csr session which is not updated after roaming to AP with different
security profile. This causes incorrect values in AP profile command.
Send correct authmode/unicast and multicast ciphers in AP profile
command to firmware.
Also modify the below 2 ini default values as:
candidate_min_rssi_for_beacon_miss=-75
candidate_min_rssi_for_disconnect=-75
Change-Id: I33cc9f516447071e977768f01738eea7a2ecd99c
CRs-Fixed: 2879943
Store the NAN NDI beamform service bit in the NAN capability struct and
add API to access that value.
Change-Id: I429fc870b5287bd40855b9277d14b19574974a46
CRs-fixed: 2876730
Currently the preferred channel list is not updated to have indoor only
channels removed. Add functionality to remove the indoor channels from
the PCL.
Change-Id: I31df737a3688f6c64c2eb5fa5ab0cea1d36869e5
CRs-fixed: 2874092
Currently, TWT setup is allowed after roaming even if
TWT notify from firmware is not received.
Block the TWT setup till notify event is received
from firmware.
Change-Id: Ia6ff8fe9e05f32ddf6dbdd608d9090b612237f26
CRs-Fixed: 2870610
Fill extra params such as join timeout etc. in LIM
for connection manager path.
Change-Id: I3c12e49023ce04c6b8d2f6c41d128ed9fc93a441
CRs-Fixed: 2879094
Move the beacon interval validation logic from the CSR module to the
interface manager module.
Add a path to send events to the SAP event handler from the MLME
module.
Change-Id: Ia86f219b3f209b53e7818a80f95b2c0555550736
CRs-fixed: 2796676
Cache roam_fail_reason, roam_invoke_fail_reason and
roam_trigger_reason in mlme value for the vdev.
Host sends these values to userspace via a vendor
command after disconnection.
Change-Id: Ief7d027f69b0449254de3615b39829f346589095
CRs-Fixed: 2877230
Currently when SAE single pmk lifetime expires, the userspace
issues disconnect. To avoid this, on reaching a threshold value
of the total pmk lifetime, the firmware will clear the single
PMK and initiate a roam scan to perform full SAE and derive
new pmk.
Add changes to:
1. Send the remaining single pmk timeout value in seconds to
firmware.
this is calculated as the diffence in pmk timeout configured by
userspace and the time passed after set_pmksa was done (which is
system timestamp between the set_pmksa timestamp and timestamp at
which RSO command is filled).
2. Add internal roam trigger for SPMK timeout trigger.
3. Set the roam score delta value as 0 for SPMK timeout roam
trigger.
Change-Id: I62c2ddbbfeb2811a4342d41f2bdaa8d988568bcc
CRs-Fixed: 2869665
SAP stops working when it comes first and then sta connection
happens in non dbs HW mode
Allow SAP on non dbs HW even if the channel is safe or
lte-coex enabled.
Change-Id: I3e80b423ccb30fdb5e53a6d2aff961162b316e1c
CRs-Fixed: 2873957
This reverts change:I9408713fcf828d24688ecc45290d8c90a8d54c22
as it's not needed anymore as the actual issue(commands waiting
in active queue for response when the vdev is deleted) is fixed
with change:Ie31936132a389685ff4ff55b43ccbb4102e65830.
This wait-for-response causes a delay of around 200ms in
vdev_create as it's a blocking call.
As vdev_create happens after finding the peer device in case of
p2p, overall connection is delayed and connection time has
increased from 350ms to 600ms. This effects the
uses cases like WFD where applications have strict timing
constraints after finding the device.
Change-Id: I45c223a8d157892d8ec64b04f68cfbf39d732833
CRs-Fixed: 2870774
According to new requirement, when SAP manadatory channel list
enabled (gWlanMccToSccSwitchMode = 4,
gEnableSAPManadatoryChanList=1), the SAP will only be started on
PSC and VLP channels on 6Ghz band. Add all 6GHz PSC & VLP channels
to SAP mandatory list.
Change-Id: I00514c0af9c1cc07460120c928ced652aa2e8d4e
CRs-Fixed: 2870590
To make it generic, rename the flag QCA_WIFI_NAPIER_EMULATION
as QCA_WIFI_EMULATION.
Change-Id: I8e654262a38a7a701a5a34e2bbd5394c8985c65a
CRs-Fixed: 2871313
Currently when TWT commands are sent to firmware, the host driver
doesn't acquire wake lock. So the wlan can got to wow mode before
receiving the TWT command response and the response will get
dropped since host is in wow mode.
To avoid this make the TWT events as wakeable so firmware can
wake up host if host is suspended.
Change-Id: I2750049f9173de564e24114731d3fdd8ec8d6d86
CRs-Fixed: 2869865
When the TPE IE comes to driver, there could be information for both
local and regulatory. Add an INI for preference in the case that both
sets are present.
Change-Id: I4b37123569f422863fc805063974c65878a9baea
CRs-fixed: 2854774
Refactor WLAN_FEATURE_PKT_CAPTURE_LITHIUM to WLAN_FEATURE_PKT_CAPTURE_V2
and refactor pkt_capture_get_pktcap_mode_lithium to
pkt_capture_get_pktcap_mode_v2 to remove hardware name from compilation
flag and function name.
Change-Id: Id12c60a47dee95a719cc39aa0803edc9582dda3b
CRs-Fixed: 2869808
Add WMI service FW capability check before enabling D0 and D3
WoW for SAP and GO clients connected mode.
Change-Id: I878e4ee33807804e049bf1e8b8078d28fc1d4834
CRs-Fixed: 2869072
Add RSO lock and use it to send RSO commands. Also
avoid calling the cm_disconnect API while holding
SME global lock to avoid race.
Change-Id: I588a56f4c96d137d3283b2dc57274de069ecb4ab
CRs-Fixed: 2870603
Update the channel info in the tx_status from policy manager for
packet capture mode.
Change-Id: Id237a0ee3d102b60c2cd9d47f2febb4538f29e2f
CRs-Fixed: 2869411
Use is wps/osen from the connect req/rsp, instead of parsing
the assoc ie and deciding the value.
Change-Id: I628c8aab22d1e842219b8d38fd025299d91cc68f
CRs-Fixed: 2868657
Decouple BW monitor from WDI3_STATS_UPDATE and add as a
separate feature flag WDI3_STATS_BW_MONITOR.
Change-Id: I77fb5658d995daceaada6a7d64f669da706ead9c
CRs-Fixed: 2868582
When SAP operated in channel 36 with 160Mhz, the primary channel
36 is non-dfs and existing checking dfs will drop the radar event
if the radar detected on channel 52. Change policy mgr API to
check the dfs flags instead of primary channel state.
Change-Id: Ie2f242182b8df30e5d1875e278c5ebffa2e7cafd
CRs-Fixed: 2865173
Use wlan_reg_get_channel_state_for_freq to get channel state
instead of wlan_reg_get_channel_state.
Change-Id: I0ab0465458801747cc97bf03b3aee4ec255beb57
CRs-Fixed: 2859852
Add user controlled rx addba request reject for peer AP based
on ini configuration.
Change-Id: I80a4b78c1af77f5bfa68be3163f9e9a78cc64245
CRs-fixed: 2835511
Rename existing INI to enable_bus_suspend_in_sap_mode and define a
new enable_bus_suspend_in_go_mode. Also define new APIs
wma_is_vdev_in_sap_mode and wma_is_vdev_in_go_mode.
Change-Id: If38c4db7b3d1f7323df45d9a7d80a02a44e7ca41
CRs-Fixed: 2864596
Host moves hlp info from csr session to mlme priv object. Modules need
hlp info now use hlp info from mlme priv object
Change-Id: Ieffa749635239f72337af685707acccfd666a58a
CRs-Fixed: 2862315
Currently, host driver rejects any concurrent session with other
security modes(e.g. NAN) when WAPI is present. This is due to a
limitation on older platforms. But newer platforms(e.g. Lithium
architecture) support WAPI+other security modes concurrently.
Firmware advertises service capability WAPI_CONCURRENCY_SUPPORTED if it
supports other security modes when WAPI is active. Get the capability
and accept/reject concurrent sessions.
Change-Id: I0e004e1220afd9c42869589364606c9f729798f7
CRs-Fixed: 2844799
